Web
Analytics
Connect with us

Tech

How To Run Whatsapp On The Computer?

Published

on

whatsapp-on-the-computer

WhatsApp needs no prior introduction. It's so far the most used and the most popular instant messaging application, for mobile operating system's out there.

What makes WhatsApp so popular is the fact that it's a cross-platform messaging application, and that you don't need to create any specific account, in order to use WhatsApp.

 All you need is the mobile phone numbers of you and your friends.

The only limitation or disadvantage, that could be pointed out of WhatsApp was that it has no desktop software or desktop client. Hence, you need a Smartphone with WhatsApp support in order to use the application.

Well, that would no more be a barrier :D. Because now you can use WhatsApp on the computer. Even though there is no official WhatsApp Desktop-App, you can use WhatsApp on the computer with the help of third-party software called “BlueStacks“.

Bluesharks is not an exclusive WhatsApp Client for Windows. You can run any Android application on Windows computers using the BlueShacks software.

Today, we are here with a small tutorial on how to install and use WhatsApp on the computer using the Bluestacks software.

Minimum System Requirements For Installing Bluestacks Software:

To run the Bluestacks software on your computer, there are some minimum system requirements. Like:

  • You need administrator access to your computer.
  • Your computer must be running at least Windows XP Service Pack 3.
  • Your computer must have at least .Net framework 2.0
  • Your computer must have at least 2 GB of RAM.
  • Your computer must have a C: Drive as the default storage location.
  • You need a compatible VGA.

If your computer meets the minimum system requirements to install the Bluestacks software, then below is how you can install the software and run WhatsApp on the computer.

How To Install Bluestacks And Run WhatsApp On The Computer?

Below is the detailed tutorial on how to install bluestacks and run WhatsApp on the computer:

  • Download the bluestacks software installer for your computer from here.
  • After you download the bluestacks software installer, run the installer.
  • When you begin the installation process, set and enable all app store settings.
  • After installing the bluestacks software, visit their official site [the site from where you downloaded the installer] and upgrade it completely.
  • After you have finished the installation, launch the application from your desktop.
  • From the main home screen of the Bluestacks software, you'll see a Search bar.
  • Click on the search bar, and type in “WhatsApp” as the search query.
  • Now click on the install button, to install WhatsApp Messenger to your computer.
  • Before beginning the installation process, you'll need to login to your Google Account. Log in with your credentials. If you don't have a Google Account, you'll need to create one.
  • After the installation of the WhatsApp Messenger ends, launch the WhatsApp application.
  • As usual, you'll need to agree with their Terms and Policies and then you'll need to enter your mobile number with country code [ ex: +91].
  • After entering your mobile number, WhatsApp will now send an automated message to your mobile number with a verification code.
  • Enter that verification code to the WhatsApp application on your computer, and you're done!

Now to add new contacts to your WhatsApp application on the computer, you'll need to add the mobile number of your contact with his/her country code. You can perform any usual tasks using the WhatsApp on the computer.

I hope you found this simple tutorial helpful. If you have any doubts or suggestions, please leave it as a comment below! 🙂

Continue Reading
7 Comments

7 Comments

  1. Abid Omar

    July 27, 2013 at 4:05 pm

    Thanks….Nice Info…Very Help full. Can we use any Android apps like this???

  2. Akhil Pulotil

    August 1, 2013 at 1:41 am

    Hello Abid,
    yes you can run any Android applications on your computer, using Bluestacks ! 🙂
    Keep Visiting ! 😀

  3. sameer

    August 24, 2013 at 2:24 pm

    Wow! Great news for all Whatsapp lover.Every one wants whatsapp on mobile. I read this articles and i followed all steps and i have installed Whatsapp on my laptop this is very useful information i got here.Thanks for sharing this info on your blog.

  4. Debasmita

    August 26, 2013 at 3:36 am

    Hey Akhil…
    Have been looking for this for a long time…really needed to install whatsapp on PC…but dint know about Bluestack!!
    Thanks a lot for the information…:)

  5. Ashish

    August 26, 2013 at 1:13 pm

    Hey Akhil
    I must say its really informative post. Thanks for sharing it.
    Keep up the good work.

  6. nirali

    September 24, 2013 at 5:20 am

    Hi Akhil
    its nice way to run all android application in pc. i never know about Bluestacks. thanks for sharing very helpful with me.

  7. Kerry Tiwana

    December 20, 2013 at 9:19 am

    Yes very nice and informative article for this topic.
    thanks

Leave a Reply

Your email address will not be published. Required fields are marked *

Tech

How to Use Prezi?

Published

on

how to use Prezi

If you are looking for an application for making professional presentations, then Prezi is our say. So, you must want to know how to use Prezi?

In this article, we will tell you how you can use it in an easy and simple way. So, let’s get started:

What is Prezi?

Prezi is presentation software that is cloud-based. It is quite a good platform for the presentation media as the users are equipped with a facility to zoom in and zoom out, display and navigate through the information by making use of parallel 3D space on the presentation.

How to use Prezi?

For the sake of convenience and comprehension, we will be splitting this tutorial into three sections.

Section 1: Signing up for Prezi.

This section primarily deals with the creation of the account and signing up for Prezi.

Step #1: In this very first step, you require visiting www.prezi.com. Take a note of this fact that all of your work will be saved on the cloud so that they can be accessed from any part of the world where there is internet connectivity.

You will be provided with some pricing options in which you are required to choose one of those in this step. So, let us first have a walk-through of the available options.

Enjoy: This pricing option comes with a basic 4GB storage, control on privacy settings, accessibility on any device, and premium support just for $10.00/m.

However, you can get a low cost to enjoy account if you make a purchase of the Prezi Enjoy account for a whole year. It may cost you $4.92/M.

This account is useful if your needs are very basic. You can try this for free for the first 14 days and after that, you will have to pay the corresponding amount in order to access the features.

Pro: This comes with unlimited space with other features as of the Enjoy pricing option along with image editing tools and works offline features. The monthly bill will cost you $20.00/M while the annual plan will cost you $13.25/M.

Teams: This is the most equipped Pricing option with all the features and it costs $795.00/Yr up to 5 users. You can consider using this if you are having a big team.

Amongst all these paid options, if you want to use Prezi free of cost then you can also do the same.

You can get a Public account and this way you can use Prezi absolutely free. With this account, you can create, collaborate and present on Prezi.com.

Step #2: You can choose any of these available options which we have discussed under Step #1 and sign up using one of those.

Alternatively, you can visit the following link if you wish to sign up for the free public account. This will get you to a web page where you will be asked to enter details like your name, email address and other stuff.

However, you can also sign up using either your LinkedIn account or your Facebook account.

You can also access your Prezi dashboard using the official iPhone and iPad application. It is absolutely free and the application lets you access your Prezi’s anywhere through the device.

Once you are done with the signing up process, you will be redirected to your Prezi dashboard with a “Get Started” message on your screen.

If you have managed to reach this far then you should definitely look for the next section.

Section 2: Planning the presentation.

It is recommended to plan the presentation before actually making it. This will help you a lot while making one as you will have a rough sketch of what you are going to have as your final thing.

You can plan out the whole presentation as you will be having the whole presentation landscape on your screen. You can zoom in and zoom out. Keep a track of the spots where you want to place your matter.

To do this, from your dashboard, you have to click on “Create a new Prezi”. This will take you to the editing section where you can edit the whole presentation.

Section 3: Making the presentation.

Now, you are all set to make a presentation. By now, you can see a basic template which you can edit as per your requirements.

If you wish to add a circle frame in your presentation then you can easily do so by clicking on the circle positioned at the extreme left corner of the window.

This will result in a circle that can be dragged to the desired position and you can also change the dimensions if the circle just by resizing it.

Additionally, you can also include squares, brackets jut by clicking on the two arrows on the same block and this will open a drop-down menu for you from which you can select your desired structure.

If you wish to edit the text then you can also do it very easily by clicking on the text area as shown.

If you want to insert images, symbols and shapes, YouTube videos, layouts, arrows, highlighters and much more then you can do the same by clicking on the insert tab at the top navigation panel and then selecting the desired option from it.

You can also customize the presentation by clicking on the “Customize” tab located next to the insert tab. You can choose different themes as per availability.

If you wish to navigate between the different elements then you can do so by clicking on the element blocks which can be seen at the left pane of the window.

Once you are done with the presentation, now, you can present it, download it as PDF, portable Prezi and even share it on Facebook and among friends.

Now, we are on a verge to end this article on “How to use Prezi?” We believe that we made this article helpful enough to satisfy your curiosity and need about using Prezi.

Moreover, if you have any other information or query regarding this topic then do tell us via comments. We would love to hear from you.

Stay tuned.

Continue Reading

Tech

How to Make an Email Address

Published

on

An e-mail has been in the sphere for quite a long time and is serving its purpose well. In this digitally infused era, everyone is more likely to have an email address.

So, one must know how to make an email address? In this article, we will tell you about the same. So, let’s get started:

How to make an email address?

Method 1: Using Gmail.

Step #1: As the very first step, you are required to visit www.gmail.com. You can easily do so by typing the address www.gmail.com in your browser’s address bar and then hit enter.

Alternatively, you can also type “Gmail” in the search field of your search engine and then you can land on Gmail.com via the relevant search results. If you are done up to this, then you are good to go to the next steps.

Step #2: The previous step will take you to the Gmail’s homepage. In this step, you have to locate for the “Create an account” link and once found then you need to click on it.

One thing to take note is that if an account is already logged in the system, then you can find the “Create an account” link by following the mentioned route. Manage accounts on this device -> Add account -> Create an account.

Step #3: Due to your recent activity, you will be redirected to a web page where you will be prompted to enter your details. The detail includes your first and last name, username, password, date of birth, gender, mobile number and alternate email address (Optional).

Always makes sure that the password must be of at least 8 characters long and the username which you have chosen must not be in use for someone else.

Once you are done with the entering of these details, you need to type the system generated captcha code and then select your location and after that, you will also have to agree to their terms and conditions by clicking on the checkbox next to the corresponding text.

Now, after doing all the mentioned, all that you require is to click on the “next step” button, and this will take you to the next step.

Step #4: In this final step, you just have to click on “Continue to Gmail” and this will take you to your Gmail inbox, and you can now enjoy sending and receiving emails.

Method 2: Using Yahoo!

Step #1: In this very first step, you require visiting www.login.yahoo.com. This is exactly where the process of creating a Yahoo! Account will start from. You can also get to the login page from the main Yahoo! Website by clicking on the mail icon which is positioned at the top right corner.

Step #2: Now, you have to click on the “Create account” button which is located right below the “Sign in” button. This will redirect you to another web page where you will be prompted to enter your personal details like First name, last name, Yahoo username, password, mobile number, date of birth and gender.

The optional field includes recovery number and relationship. Recovery number is of great use and may come handy if you forgot your login credentials.

Once you are done with all this, then you need to check the checkbox next to which I agree to Yahoo Terms and Privacy. Now, all that you require is to click on “Create an account.”

Step #3: This step requires entering the code which you have just received your provided number. The moment you have entered the verification code and clicked on “Submit code”, you will be automatically taken to your Yahoo inbox.

Just in case if you cannot receive a text message on your provided mobile number, you can also receive an audio call from Yahoo, which will equip you with the code.

This way you just created a Yahoo! Email account and now you can enjoy your Yahoo! Email account.

Method 3: Using Outlook

The outlook is a free email platform by Microsoft. Previously, it used to be popular by the name of Hotmail by 2013.

Step #1: Go to www.outlook.com. This is the starting point of our journey from where we will start the process of making an email account using Outlook. So, let’s get started by jumping on to the next step.

Step #2: In this step, you have to locate for the “Sign up now” link which is usually located at the bottom. Once you have located for the same, you now require clicking on it.

This will take you to the account creation page where you will have to provide the necessary personal details like the first name, last name, location, date of birth, gender along with your username and password.

Additionally, you will have to enter an alternate email address or a recovery phone number which can be used in case you forgot your login credentials. Just do this because it will add an extra layer of security to your outlook account.

Now, as you proceed further, you will have to enter the captcha code and then all that you have to do is to click on the “Create account” button.

This will mark the processes as complete and within no time you will be redirected to your inbox which means that you can now enjoy the email service as you have just created an email account using Outlook.

Final words.

This final words section brings us to the end of this tutorial cum guide on “How to make an email address?” We hope that we were efficient enough to satisfy your curiosity about this topic.

We firmly believe that we have left no stone unturned while getting into the nitty-gritty of the topic and making you understand the entire concept of it.

But if you still have any query regarding making an email address then feel free to drop your query via comments below. We will try our level best to resolve that.

Moreover, if you found this article helpful and worthy, do show your love by sharing it socially.

Thank you for passing by and giving it a read.

Continue Reading

Tech

How To Make a Saddle in Minecraft?

Published

on

Minecraft is quite a popular game and is widely played. So, if you want to know how to make a saddle in Minecraft, then you have landed at the right place.

In this article, we will be telling you about the same. So, let’s get started:

What is a saddle in Minecraft?

Superficially, a saddle means a leather-covered seat that is put on the back of the horse. In Minecraft, a saddle is used for the same purpose. A saddle is used to ride horses, mules, and pigs in Minecraft.

Unlike most of the other items in Minecraft, a saddle cannot be crafted. Instead, it has to be purchased or gathered.

How to make a saddle in Minecraft?

Step #1: Locating a saddle.

In this step, we will be telling you about the various possible places in the game from where you can find a saddle. Saddles are usually contained within the chests so, ultimately you have to hunt for a chest, and if you are lucky enough then you may be able to find a saddle.

Chests: It is one of the possible ways of getting a saddle as saddles cannot be crafted. You will have to look out for every chest you came across. Though the probability of finding a saddle in chests is quite low, you might be lucky enough to find one.

Dungeon: Chances are high that you can find a saddle in the dungeons which are scattered throughout the world. As per statistics are concerned, 54% chances are there that you may find a saddle as loot from the chests in dungeons.

You can find one or two chests in a dungeon, and chances are very high that you might be able to find a saddle in one of those chests.

Nether Fortress: A yet another spot where probability of finding a chest is good enough. In order to access the Nether, You require building a Nether Portal frame using obsidian blocks.

Beware because Nether is a dangerous place. So, make sure to come up with strong gears and lots of supplies.

There are 40% chances that you can get a saddle in the Nether Fortress, which may get down to 35% in 1.9.

Desert Temple: On your adventure, if you are looking for a saddle then you should look for a desert temple. If you have found one, then you should consider looking for the clay blue block which is usually located at the center of the floor.

After digging it for a while, a secret chamber with four chests will be exposed to you. There are 15% chances that you may be able to find a saddle in one of them which goes to 24% in 1.9. There is a sure shot chance that you will get access to a saddle.

Village blacksmith, Jungle temples and abandoned mineshafts: Villages are more likely to have a blacksmith, and there are 16% chances that you can find a saddle in his building via the chest.

Abandoned mineshafts and jungle temples have around 15% chances of containing a chest with a saddle inside. Temple has two chests while an abandoned temple can have multiple chests.

Step #2: Trading for a saddle.

You can trade your saddle and in this step, we will show you how you can do the same.

If you are up to the console or system version of Minecraft, then you can trade the saddles in exchange for emeralds with the villagers you came across. The leatherworker villagers who appear in a white apron getup can trade with you.

Additionally, if you want to purchase a saddle, then you will need somewhere around 9-16 Emeralds to unlock the right to buy a saddle and 8-10 more emeralds to purchase the saddle. You can buy the saddles either by mining, trading with the villagers or by obtaining the chests.

If you want to trade with the leatherworker, then you require right-clicking on the leatherworker in order to open the trade window. After this, you will have to buy the leather pants in exchange for 2-4 emeralds.

Now, open the trading window again and buy the leather tunic. Don’t forget to close the trading window as not doing so will result in no next tier.

Now, once you have enough emeralds then, this time, the leatherworker will have saddles available for trade. You can now buy emeralds.

Step #3: Using a saddle.

You can ride a horse or even a pig using this saddle. In this section, we will tell you how you can do so? So, let’s get started:

1: You first have to approach a wild horse and will have to try to climb on top of it. Initially, the horse will throw you out but after a few attempts, it will allow you to ride on it. While riding on it, make sure to be empty-handed.

2: While you have climbed on the horse, you need to open your inventory. Make sure to have the saddles available for use.

3: Now, all that you require is to position the saddle in the saddle slot next to the horse image. Now, you can easily ride the horse using the controls as you normally do. You can also make the horse jump by pressing the jump button.
Additionally, if you want to remove the saddle, then you can easily remove it by selecting the horse and then removing it from the inventory.

Wrapping up.

This wrapping up section brings us to the end of this tutorial cum guide on “How to make a saddle in Minecraft?” We hope that we were efficient enough to satisfy your curiosity about this topic.

We firmly believe that we have left no stone unturned while getting into the nitty-gritty of the topic and making you understand the entire concept of it. But if you still have any query regarding making a saddle in Minecraft then feel free to drop your query via comments below.

We will try our level best to resolve that.

Moreover, if you found this article helpful and worthy, do show your love by sharing it socially. Thank you for crossing by and giving it a read.

Continue Reading

Tech

How to Recover Deleted Pictures From SD Card?

Published

on

How to recover deleted pictures

Many times, it would happen that you accidentally deleted some important pictures from your SD card, and now you want to recover it. For this “How to recover deleted pictures from SD card?” becomes an obvious question.
So, let’s get started:

How to recover deleted pictures from SD card?

The prerequisites for the methods which we will be sharing over here require a system, the SD card from which you want to recover the deleted pictures and some software which we will be mentioning over here.

So, let’s get started:

Method 1: Making use of PhotoRec.

Step #1: In this very first step, we recommend you to stop accessing your SD card because chances are high that if you will continue using the SD card the data may get overwrite. So, if that happens then you may not be able to recover the photos.

So, we advise you to unmount your memory card right away. This way the chances are less than the data get overwritten by new data.

Once you are done with this, then you can proceed to the next step.

Step #2: Now, you are required to download the PhotoRec software. It is a cross-platform application that you can use in any operating system.

Be it Windows, OS X or Linux. In order to download PhotoRec software, you can consider making a search query on your search engine with the relevant terms and then clicking on the most appropriate link.

Once you are done with the download, then you need to extract the program.

The main fact about this program is that you need not install this application on your system.

You just have to extract the Photorec_os (here OS means your operating system that is, if you are using windows then the program would be named as Photorec_win) program from the ZIP file which you have just downloaded.

Step #3: Now, you need to insert the memory card on your system. You can insert it via any SD card reader or through the USB cable.

You now need to run the application named as “photorec_win.exe” (or photorec_os.exe). The Photorec application runs on the command-line interface.

You will have to use the arrow key to navigate through the program.
You will see the list of available drives on your screen. Now, you are required to select your SD card from the list and once you have done that all that you require is to hit enter.

Step #4: Since your SD card must be having only one partition then you need to select it to sing the arrow keys. Now, you require selecting the “File Opt” menu which is located at the bottom of the window.

From the menu which appears afterward, you need to deselect all those files which you are not looking for. We recommend you to be specific about the file type as it will increase the speed and chances of the recovery.

Step #5: After successfully executing step #4, you now have to select the search menu option in order to proceed further. After this select the file system type as “other”.

Once you are done with the mentioned, you now will be prompted to select the space or section which needs to analyze.
If you are looking for only deleted files, then you need to select “free” else you should consider going for “Whole.”

Step #6: In step #6, you have to select the directory where you want to save the recovered files. After this, you are required to wait for the process of recovering to complete.

This may take time depending upon the size and numbers. In the meanwhile, you will be seeing the recovered files on your screen.

Once the entire process is complete, you can now see the recovered pictures in the destination folder.

This way, you just recovered pictures from your SD card.

Method 2: Making use of Data Rescue 3.

This application is exclusively for the MAC system. So, if you are using MAC, then this section is absolutely for you.

Step #1: As already said in the previous method, you are advised not to access the SD card any further until the pictures are not recovered.

Step #2: After step #1, you are required to download and install Data Rescue 3 on your system. Let us tell you that Data Rescue 3 is not a free application and you need to purchase it. It is a very powerful program for MAC if you wish to recover your deleted stuff.

Now, you need to insert your SD card into your MAC. In case if you don’t have a memory card slot on your system then you should use an external card reader or the data cable for the same purpose.

Step #3: Now, launch the Data Rescue 3 application. Once the application is open in front of you, then you need to click on “Start New Scan”.

Once the scan is complete, you will see a list of drives from which you have to select your SD card.

After this, you will be prompted to select the volume but as SD cards primarily have only one volume so, you need to select that one only. In case, if your SD card is having multiple volumes, then you need to select the entire SD card.

Step #4: After this, you need to select your scan method. As you have landed on this article, we assume that you have to recover deleted pictures. So, you must go for “Deleted Files Scan”. However, you can choose anyone from the available ones.

Step #5: After Step #3, you need to wait for a while for the scan process to complete. Once the process is complete, you have to choose the files which you want to recover.

The moment you are done choosing the files, click on “Recover” and then select a convenient location to save those files.

So, this way you can easily recover deleted pictures from a memory card.

With this, we have reached the end of this article on how to recover deleted pictures from SD card?

We hope that this will do the needful for you. Thank you for reading and stay tuned.

Continue Reading

Tech

How to Use Sharepoint?

Published

on

How to use sharepoint

Sharepoint is a program developed by Microsoft which is a perfect entity of browser-based online document management platform. It permits groups to set up a centralized, password-protected environment for document sharing. It is a cloud-based service.

So, if you want to know How to Use Sharepoint then you are in the right place. In this article, we will tell you about the same in easy and simple steps. So, here we go:

What is Sharepoint?

According to Wikipedia,

SharePoint is a web application platform in the Microsoft Office server suite. Launched in 2001, SharePoint combines various functions that are traditionally separate applications: intranet, extranet, content management, document management, personal cloud, enterprise social networking, enterprise search, business intelligence, workflow management, web content management, and an enterprise application store.

Sharepoint can be used for the following purposes:

1: Personal Cloud.

2: Enterprise content and document management.

3: Intranet and corporate social network.

4: Software framework.

How to use Sharepoint?

How to add a file to Sharepoint?

Step #1: As the very first step, you need to log in to your Sharepoint account. The login process is exclusive in terms of the team members and the groups. ?

More particularly, a web address will be provided to you if you are using the free version of Sharepoint.

Once you are equipped with the login path, you need to have the login credentials with you which would be provided to you by your Sharepoint administrator. The login credentials include username and password.

Now, you have to use these in order to log in to Sharepoint. Once you are done with all this then you are good to go to the next steps.

Step #2: This step requires uploading the documents which can be shared among your group members. In order to do so, you have to navigate for the documents section and once found, click on it. After this, you need to click on “Shared Documents”.

Once you are done with the mentioned, now you need to locate for the “Upload” tab which is usually positioned at the top navigation bar. Once found, you have to click on it. This will open a small drop-down menu for you from which you have to choose the “File” option.

Now, search for the desired file in your directories. Once you have found it then you have to select it and then click on the “Open” button which you will be seeing at the bottom of the dialog box.

Additionally, if the file which you have selected is already present in your Sharepoint directory and if you still want to upload it again then make sure to have a check on the checkbox next to which “Overwrite if the document already exists” is written.

Step #3: Now, all that you have to do is to click on “Save”. This will save the document for you. Now, if you will look at your shared document page then you will have the document which you have just uploaded to your Sharepoint directory.

How to create a new document in Sharepoint?

Step #1: Make sure to be logged on to the Sharepoint. Now, you need to click on the “Create” tab and from the follow-up drop-down menu which appears, you need to click on the “Word Document” option.

This will open the editing area for you. Now, create the document by typing the desired input.  You can create document types like word, excel, HTML and PowerPoint.

Step #2: The moment you are done creating the document, you need to save the document. You can easily do so by going to the File menu and then clicking on the save button.

Now, you will be prompted to enter the name of the document. So, you are required to do so. This way you just created a document and that document can be seen in your Sharepoint library.

While creating the document, you should be aware of the fact that anyone who has access to the Sharepoint page can view your document.  So, make sure not to put in any private data to it as it may be misused.

How to connect to a Sharepoint site?

In this method, we will make use of WebDav in order to achieve our goal to connect to a Sharepoint site. This method works best in Sharepoint 2010.
So, let’s get started:

Step #1: As the first step, you require clicking on the start button and then right-clicking on the “Computer” option. Alternatively, you can also right-click on the “computer” icon at your desktop.

Right-clicking on the computer icon will open a menu for you from which you have to select the “Map network drive” option.

Step #2: In the subsequent window which will appear as a result of your recent activity, you will be prompted to enter your Sharepoint site URL next to the Folder field. Once you have provided the mentioned then you need to click on the “Finish” button.

Step #3: In this step, you will have to enter the Sharepoint credentials in order to link to the SharePoint site. Once you have provided the same then all that you have to do is to click on the “OK” button and this way your Sharepoint site will appear in a new window.

You can access your site by clicking on the computer and you will see your Sharepoint site right there.

Wrapping up.

This wrapping up section brings us to the end of this tutorial cum guide on “How to use Sharepoint?” We hope that we were efficient enough to satisfy your curiosity about this topic.

We firmly believe that we have left no stone unturned while getting into the nitty-gritty of the topic and making you understand the entire concept of it. But if you still have any query regarding using Sharepoint then feel free to drop your query via comments below.

We will try our level best to resolve that.

Moreover, if you found this article helpful and worthy, do show your love by sharing it socially. Thank you for crossing by and giving it a read.

Continue Reading

Trending