How to Fix iPad Won’t Charge?



iPad won’t charge

Apple has been at the forefront of technology and technological innovation for years now. Founded in 1974, Apple products are ranked as the most premium and top-end products driving the world crazy whenever new products come into the market.

Today, Apple has an enviable image of a technological innovator whose products are excellent. Though the products are extremely good, at the end of the day it is electronic circuits and common problems like the iPad won’t charge or iPhone taking forever to charge can crop up.

The iPad won’t charge is a common cause of irritation not only among Apple customers but actually for all tablets and smartphones. For various reasons, the charging port and cable are always a weak point for these devices. If your iPad will not charge then basically you will be stuck with the world’s most expensive chopping board and sure you don’t want that to happen.

If you are racking your brain over the question ‘why won’t my iPad charge’ you should know:

  • Whether your iPad has a lightning port or a 30-pin port, it is open to the air and thus vulnerable when it comes to dust and detritus. This can clog up the connections and the iPad says not charging.
  • The head of a charging cable gets twisted and frayed.
  • There may be a problem with the power outlet and you are unnecessarily crying my iPad won’t charge.
  • There can be a problem with the battery unit.

So, there can be ‘n’ number of reasons why the iPad won’t charge. Let us see the ways to troubleshoot the problem before reaching out to Apple care as with nine out of ten cases it is a minor glitch, which can be easily taken care of.

Most of the time, it is a software issue that hardly takes any time to fix, but at times, it can be a hardware problem too with the dock connector. Before rushing to Apple Care, follow these troubleshooting techniques to ascertain if you really need their help.

Complete Solution if Your iPad won’t Charge

Check Basics

  • If your iPad won’t charge, the very first thing that you should check is to switch outlets and ports. Sometimes, a particular port does not work or the socket you plugged in might be having some electrical problem. So, try a different plugin or a port.
  • Double-check if the cable is plugged firmly and fully into the iPad.
  • USB end is plugged firmly to the plug attachment and plugged to the wall outlet. Any side loose connection will result in no charging.
  • Last but not least, do not forget to switch on the power outlet. It may sound stupid but happens.

Hard Reset

You try this because at times some bad bits get stuck and they can be flushed out by rebooting the iPad. To reboot it, you need to follow these steps:

  • Press and hold down both the Sleep/Wake button and the Home button at the same time.
  • Keep holding them down until you see an Apple logo.
  • Release.
  • Once rebooted, try again to charge.

Switch Cables

Once you have checked the basics and rebooted your iPad and still it is not charging try to figure out the problem in between. The switch cables that connect the device to the sockets are subjected to wear and tear by common usage.

Sometimes, we wrap the cables in the same manner for many days, resulting in them getting frayed and twisted. Other times, we use third-party cables and defects to catch up with them.

So, try a different cable and see if the problem lies there. Borrow one from your friend or colleague to check if the problem is with your cable.

Charging Through Mac

If you’re charging via a Mac then complaining that iPad not charging on PC is a common problem. It happens because charging via Mac and charging via power outlet can’t output the same wattage.

It is always slower through the Mac. As it is slower sometimes, ‘not charging’ status is seen at the top of the iPad screen.

If you still want to charge via a MacBook, make sure the MacBook itself is plugged in. Check the settings of the Mac too as there may be problems if the laptop is trying to preserve battery power.

Also, be sure to plug into the Mac itself rather than a USB-connected keyboard or similar.

Stop Using While Charging

If you are playing a game with high-end graphics while the iPad is charging then, it will take forever to charge. This is because any charge you gain will be set against the loss incurred through working the processor and screen.

In such cases, there is no problem anywhere, but the high graphics blitz a battery at approximately the same rate as the iPad is charging and sometimes even more.

Check the Plug Adaptor

Apple currently sells USB power adaptors in 5W (for iPhones and Apple watches), 12W (for iPads) and 29W (for laptops) ratings. But for the convenience of users, these adaptors are inter-compatible. Hence, an iPhone can be charged with an iPad charger and vice versa.

Though this is doable, it does affect the charging speed. Older iPhones can’t benefit from the 12W adapters, but the iPhone 6 and later can actually charge significantly faster with an iPad’s adapter – though the reverse is not true.

If you try to charge your iPad with iPhone’s 5W adaptor, it will result in a far slower charge.

Restore in iTunes

 If these easy fixes don’t work, it is time to try restoring your iPad in iTunes. iTunes is a safer bet than iCloud because it actually offloads, re-installs, and reloads the data. That can help in shaking off loose bad bits that a hard reset or iCloud restore cannot do.

1    Connect your iPad to iTunes on your Mac.

2    Click on the Device tab at the top left.

3    Click on Backup.

4    Wait for the backup to finish.

5    Click on Restore

6    Wait for the restore to finish.

Once done, try to charge. If it is charging, your mission is accomplished; else it is time to call Apple Care.

Vinith Kumar is a seasoned author, who has been writing on technology niche since 2009. He has penned down thousands of articles to date, and he's now a contributing author on KnowledgeCage to contribute his experience in building this portal. He reads about funnel building and similar articles here: Marketing Made Easy Blog

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *


How to Reverse Image Search




We all live in an era where we make numerous searches for finding the answers. So, in order to make searching a lot easier, there comes a concept of reverse image search. So, if you want to know how to image search? Then you are certainly at the right place.


In this article, we will tell you how to search by the image in simple and easy steps. So, let’s get started:

What is reverse image search?

Reverse image search means that you can use a picture to find related images from the web.

How to reverse image search?

How to Reverse Image Search Using Computer?

If you are on a computer with an internet connection, then you can easily do a reverse image search using Google. In this section, we will show you how you can do so in easy and simple steps. So, let’s get started:

Method 1: Image Search by Uploading an Image.


Step #1: As the very first step of this method, you will have to first visit the Google image search. You can do so by following the usual route of going to the homepage of Google and then navigating for the images tab. Once you have found the images tab which is usually placed at the top right corner of the window, then you are good to go to the next step.

Alternatively, you can directly visit the image search web page by clicking on the following link.

Step #2: Now, in this step, we will make use of the camera icon which you will see exclusively at your image search bar.

All that you require is to click on it. By clicking on it, you will be provided with two options. The first one being Paste image URL and the second one being uploaded an image. You can certainly go with either one which best suits you.

You can make use of the “Paste Image URL” if you are equipped with one (we will be getting into the nitty-gritty of this section in the next method) and if you are not then you can choose the other one. By default “Paste image URL” is selected.

Now if you go by the second option, then you will have to upload the image by which you want to do the reverse image search. You can do so by clicking on the “upload an image” tab after which you will be prompted to upload the picture. Once you have done the required then all that you have to do is to hit enter or click on the search button. Additionally, you can also drag the image to the search bar.

Clicking on the search button will do the needful for you and you will have the corresponding and related results in front of you. The result also includes the dimensions and relevant details regarding the image.
Google will also show you the related images section or visually similar images section from where you can search for your desired stuff.

If you wanted to reverse search an online picture, you can do that simply by pressing ‘S’ Key and then hover the mouse cursor on the desired picture and then Right-Click on the picture while holding the ‘S’ key on Keyboard.

Method 2: Image Search by Using Image URL.

Step #1: The very first step requires you to collect the URL of the image with which you want to make the search. You can easily do so by copying the address of the image from the address bar. Once you have collected the URL, then you can proceed for the next step.

Step #2: In this step, you need to visit the image search web page by clicking on this link. Now, you are required to paste the image address which you have collected in step #1. Once you have done the mentioned all that you have to do is to hit enter or click on search by image button, and this is all that you require. Google will appear with the most appropriate results, and you will have your job done in no time.

How to Reverse Image Search Using your Phone or Tablet?


If you are using your phone and you want to make an image search then you can easily do so using the phone itself. It’s damn easy and with this method, you can easily make it out in no time. So, let’s get started:

Step #1: As the first step you need to open your Chrome app or any other browser which you are using on your phone. You can easily do so by locating the corresponding icon and then tapping on it. This will open the app for you. If you are done with the mentioned, you are good to proceed further.

Step #2: Now, using the browser you have to make an image search with the keyword which relates to the image. Once you have got the results, then you have to touch the image with which you want to make a search. Touching on it will result in the larger version of the image. If you have got so, you can move to the next step.

Step #3: Now, once you have got the larger version of the image by following the instructions of step #2 of this method then you are now required to press and hold the picture for a jiffy. This will open a contextual menu for you, and this is exactly where you have to select “Search Google for this image”.

Selecting the mentioned option will lead you to the corresponding results for which you were looking for.

Wrapping Up

Does this wrapping up section bring us to the end of this tutorial cum guide on How to reverse image search? We hope that we were efficient enough to satisfy your curiosity about this topic. We firmly believe that we have left no stone unturned while getting into the nitty-gritty of the topic and making you understand the entire concept of it.

But if you still have any queries regarding how to do a reverse image search? Then feel free to drop your query via comments below. We will try our level best to resolve that.

Moreover, if you found this article helpful and worthy, do show your love by sharing it socially.

Thank you for passing by and giving it a read. For more of such an article, feel free to visit this link.

Continue Reading


How to Check Where a DNS Record is Pointing to?




How to check where a DNS Record is pointing to? If that’s what you’re looking for, you’re at the perfect place because as the title might have suggested to you, that’s what this article is about.

It not 2001 anymore where these details used to come under “expert’s arena”, and short forms like DNS automatically made a simple computer guy sound like he owns a couple PhDs in computer science.

In fact I’ve broken down almost everything that there is to DNS records in the following sections.

So okay before getting into the process of  How to find out where a DNS record is pointing to, let me clear some basics for you.

What is DNS?

A DNS is the abbreviation for Domain Name Servers. In simpler English, take them to be the contact list, or phonebook of the internet. Just like in a phonebook directory you get numbers and the names of the people corresponding to them, similarly a DNS recrod consists of websites and their “IP Addresses”.

For eg. www.howdiary.com doesn’t exist for browsers and ISPs, they don’t know this site with that name, instead this website will look something like to them, and this is the record, the connection that DNS records maintain.

Now that was the simple explanation of it, if you want a deeper look, then let me tell you a DNS record isn’t as simple as it sounds. It’s made up of quite a number of complex elements, which I’ll explain to you in case you really need to understand the functioning of what you’re dealing with.

NameServers:- I’m sure everyone on this page is aware of nameservers, well you got a domain and that domain is registered with a company, right? So the nameservers just point out the company where your server DNS is registered.

A real life scenario would be, if you register a domain name from Godaddy, and you’ve got your servers with Bluehost. In that case you’d need to point your nameservers for your domain at godaddy to your nameservers from Bluehost. It acts as the connecting link between the two.

CName:- CNames are alike nameservers, but different. They point your subdomain to the server, but they use “names” instead of numbers (IP addresses).

Infact, CNames can’t use IP Addresses even if they wanted to, instead they point to server names directly, like howdiary.com would be pointing to server1.bluehost.com (if it was hosted on Bluehost and it was the CName for Bluehost).

Zone Files:- There must be some place where your DNS records are stored, right? Think of it as the personal cabinet of your domain company where your records are stored, that’s what Zone files are.

So Zone files are the storage spaces of your data, something like the tables and columns you get in the MySQL databases.

A Records:- These are what take care of your primary and subdomains. They help you point your subdomains to specific IP Addresses so that your websites are accessible. They’re almost alike CNames but the big difference is they use IP Addresses and not website names.

MX Records:- Your domain must have Emails, right? It’s optional to use them or not, but if you do, it’s the MX Records’ responsibility to point them to your domain’s email provider.

So those are the actual elements the DNS record comprises of, it’s more like a collection of Nameservers, ZoneFiles, MX Records and everything else on the list above.

How to Check Where a DNS Record is Pointing to?

It’s pretty simple actually, and you don’t need almost any amount of internet expertise so as to say in order to know How do I check where a DNS Record is pointing to?,

The simplest method to do so is head over to IntoDns.

Once you’re there just enter the URL you want to check the DNS record for.


And in the next couple seconds, you’d get the details you’re looking for. Infact IntoDNS holds a lot more information than just the DNS records, it will get you detailed MX records, SOA records, and almost every kind of record associated with the domain.


Method #2 to Check Where a DNS Record is Pointing to:-

The second method is to use ViewDNSInfo.

It’s a tool similar to IntoDNS. You enter your domain in the “DNS Report box”.


And you get the whole of the report listed down for you in simple English.


Method #3 to Check Where a DNS Record is Pointing to:-

I know the above tools do their job well, but hey it’s no harm listing more options, right?

So the other tool which lets you check DNS records is MX Tool Box. Just head over there and enter your URL.

how to check DNS of website

And you’d get the details in around 2-3seconds.


Wellbeing honest, it’s not as elaborate or detailed as the other two tools I’ve mentioned, but it does the job, right?

Final Words:-

So that was all I had on How to check where a DNS Record is pointing to? Hope this piece helped? I’m sure I’ve listed enough options for you to run out of them.

Although if you’re facing trouble or would like me to help you out with something, just make use of the comment box, I check each one of them manually and get back to them, I promise.

And I wouldn’t mind if you think this piece helped and would like to hit the share button and spread the word around.

Continue Reading


How to Clean Laptop Screen



Cleanliness is next to godliness. This is a well-known phrase and holds true to a great extent. It may happen that you want to get rid of the dust and dirt from your laptop screen. The easiest option is to clean the screen with a cloth but wait since the laptop screen is quite delicate. So, it needs to be handled with care.

So, in this article, we will tell you how to clean laptop screen? cleaning Laptop keyboard. Also, take a look at it. With appropriate security measures so that it might not harm your system. So, let’s get started:

How to Clean Laptop Screen?


How to clean laptop screen using household products?

You need not look anywhere else because you can clean the laptop screen using household products. We will show you how you can do so.

1: Using Microfiber cloth.

Microfiber is a kind of cloth fabric that falls into the category of synthetic fiber. It is primarily used for athletic wear such as cycling jerseys because of the fact that it absorbs the moisture away from the body. Microfiber is also used to make knits, mats, cleaning products and others.

In this method, we will make use of this fabric and the fact because of which we have listed it here is that it is quite common and can be easily available.

Step #1: In this first step, you are required to turn your laptop to the off mode and then for precaution measures, you also need to separate the battery and the adapter. The mentioned is advised to do because it is always good to play by the safer side.ow

Cleaning your laptop screen while in use can lead to serious hazards and permanent damage. By this, if you are done with this then you can certainly proceed to the next step.

Step #2: Now, you are required to get a microfiber cloth. As stated in the introduction of this section that you can look for it somewhere in your house, and you can easily get one. By now, we assume that you have got one and are ready to proceed further. We recommend using microfiber cloth because unlike other clothes; it is quite soft and it does not leave any scratches or dents when rubbed against the screen.

Additionally, we never recommend you to use paper materials like napkins and all because they can also cause damage to your screen. So, better avoid using those.

Step #3: This step requires wiping the screen with the microfiber cloth and that too very gently and with delicacy. It is advised not to exert too much pressure on the screen while wiping it up as you may screw up your screen by doing this. Just wipe it gently and this will wash clean your laptop screen. This may not remove the tougher spots, but this may come handy if you are having dust on your screen.

For the frame area, you can consider using a cleaning solution but make sure not to touch the screen while doing that.

2: Making use of a cleaning solution.


If your laptop screen is having some serious dirt and you want to get rid of those, then this method is for you. This method requires a cleaning solution that can be easily prepared at the home.

Step #1: Similar to the previous method, for security reasons you are required to plug off your device and then remove the battery and the adapter. This will always keep you on the safer side. This method requires liquid for its purpose, so this step becomes primarily important.

Step #2: In this method, you are required to prepare the cleaning solution. Nonetheless, for the mediocre level purpose, this method requires only distilled water as it contains no chemicals and will serve best for this purpose. Anyways, if heavy cleaning is needed, then you can also add white vinegar to the distilled water. Make the proportion be 50 by 50.

Step #3: Now, you need to add this solution to an atomizer bottle. For those who don’t know what an atomizer bottle? It is a bottle with a nozzle spray that can contain and spray the liquid.

After this, spray the cleaning solution on the microfiber cloth. Remember that, never spray the liquid directly on the screen as this may cause a serious hazard. Instead of this, consider spraying the liquid first to the microfiber cloth and then using it.

Step #4: Now, wipe the microfiber cloth gently and smoothly on the screen. Do not exert too much pressure. If the dirt spot is tough, then wipe it over and again, and it will fade away with the passage.

Using dedicated cleaning solutions.

If you search on the internet with the corresponding keywords like “Laptop screen cleaning solutions” or “screen cleaning solutions” and others, then you can get plethoras of such stuff online. You can consider going for this as it will save your efforts of making the cleaning solution at home and looking for a microfiber cloth.

Most of the cleaning solutions come with a complete package which includes the cleaning liquid and the cloth itself.

Precautions to take care of


1: Be patient while getting rid of heavy dirt spots. This takes time as you need not exert much pressure and effort.

2: We recommend not using napkins, papers, and hard clothes as it may leave scratches and flakes which are not desired.

3: Tap water is not suitable for this purpose as it may contain chemicals that can be harmful to the screen.

Wrapping Up.

This wrapping up section brings us to the end of the article on “How to clean laptop screen?”. That was about cleaning a laptop from outside. For cleaning the laptop from inside, you need software. You can use CCleaner for mac as well as for windows PC that will clean the junk from your computer.

We hope that we were efficient enough to satisfy your curiosity about this topic. We firmly believe that we have left no stone unturned while getting into the nitty-gritty of the topic and making you understand the entire concept of it. But if you still have any queries regarding the cleaning of the laptop screen then feel free to drop your query via comments below. We will try our level best to resolve that.

Moreover, if you found this article helpful and worthy, do show your love by sharing it socially.

Thank you for passing by and giving it a read.

Continue Reading


How to Convert PDF to Word




Many times, you need to convert a PDF to word. If you are thinking that you can do it easily by changing the extension only then you are definitely wrong. You cannot do this because the file compression and formats are entirely different.

Well, if you want to know how we can do this then you are certainly in the right place. In this article, we will show you how to convert a PDF to word? You can also convert Word to PDF if you need it.


After going through this article, you will be able to easily convert from PDF to word doc. So, let’s get started:

How to convert PDF to word?

We will show you some methods with which you can convert PDF to word. So, here we go:

Method 1: Using Google Docs for converting PDF to Word


Yeah, you heard it right. If you follow this method then you need not download or make use of any other external software because you can use Google Docs for converting PDF to word. In this section, we will show you how you can do this? So, here we go:

Step #1: As the very first step, you first need to go to Google Docs and then sign in with your Google account in order to get started. Once you have done with the signing in then you can certainly proceed for the next step.

Step #2: In this step, you need to navigate to the upper right corner of the web page from where you have to locate for a folder icon which lets you upload new files. In order to proceed further, you have to click on it.

This will open a pop-up window with tabs like “My Drive” and “Upload”. Under the upload section, you can either upload your desired PDF file by using “Select a file from your computer” or by dragging the file right from the location to the web page.

Once you are done with the mentioned then the PDF file which you have uploaded will be made available to your Google Drive account and will be opened up as a preview.

Step #3: After successfully completing step #2, you have to go to your Google Drive account and then you have to navigate for the file which you have just uploaded in step #2. Once you have found the file then all that you have to do is to right-click on it and then from the menu you have to select open with and the “Google Docs”.

Step #4: Step #3 will open the document in Google Docs. Now, this step requires navigating for the file tab which is positioned at the top left corner of the web page. The moment you have found the “file” tab, you have to click on it.

This will open a menu for you from which you have to select the “Download as” option and from the subsequent list, you have to select “Microsoft Word (Docx)”.

The recent activity will download the file as a Word file and this is exactly what you require. Google Docs is the next best alternative to MS Word. Google Docs saves the document in real-time that ensures the protection of data we are writing. Here is how to make Google Docs.

Method 2: Using Third-Party Web-Based Services


Other than Google docs, there are plethora’s’ of such services that allows you to convert PDF to Word with much ease as they were specifically designed for the same purpose. You can consider going for this method as it is quite simple and easy.

For your ease and convenience, we are listing some of the web-based services which can do the needful for you. As far as the process is concerned, all that you need to do is to upload your PDF file at the appropriate field and within no time (it may depend on the size of the file), the converted file will be available to download as you require.

It’s an added fact that most of such services are free. Some web-based services are:

1: www.pdfonline.com
2: www.pdftoword.com
3: www.convertonlinefree.com
4: www.freepdfconvert.com

Method 3: Using a Converter.

If you have to convert PDF files to word then very often then you can consider installing an application on your system. Over the internet, there are many such applications available which can be very helpful for you. One such software is Nitro Pro. In this section, we will show you how you can convert PDF to word using this software.

Step #1: The first step requires downloading and installing Nitro Pro on your system. You can get it from here. Once you have downloaded the same then all that you require in this step is to install the software. Once you have done the mentioned then you can certainly proceed for the next step.

Step #2: Now, in this step, you have to open the application and you can do so by double-clicking on the shortcut of Nitro pro. This will open the application for you.

Step #3: This step requires dragging your desired PDF file to the Nitro Pro interface. Now, under the home tab, you can check on the option of the file format you want to change your file into. As you have landed on this article, we obviously assume that you are looking to convert your PDF file into a Word file.

So, you should select the “PDF to Word” option and by doing this you are just a few steps away from converting PDF to word file.

Step #4: After clicking on the save button all that you require is to configure the output settings and then click on convert. This way you can have a PDF file converted into a word file.

Now, we are on the verge to end this article on “How to convert PDF to word?” We believe that we made this article helpful enough to satisfy your curiosity and need about converting PDF to word. Also, take a look at creating double space in Word that also enhances the reading experience.

Moreover, if you have any other information or query regarding this topic then do tell us via comments. We would love to hear from you. If this article has helped you in any way then, do not forget to share it among your social circles. Thank you for crossing by and giving it a wonderful read.

Continue Reading


How to Make a Google Doc?



We all are aware of the fact that Google Drive gives Google users 15 GB of space for free. But not many are aware of the fact that one of the greatest benefits of the Drive is that you’re able to create and share documents with others, even if they don’t have a Google email. Here are the complete details how to make a Google doc in simple steps.

What Is Google Docs?

Google Docs is an online word processor that lets you create and format text documents and collaborate with other people in real-time. Here’s what you can do with Google Docs: Upload a Word document and convert it to a Google document.

How to Make a Google Doc

how to make a Google doc

Here’s how to create a Google doc:

  1. Log in to your Gmail account after opening drive.google.com. Once you are logged in, you will be redirected to your personal Google Drive. This is the place to create, share and hold all your documents.
  2. Click on ‘Create’ on the top left of the drive. You have the option to choose from an Excel spreadsheet, Word document, Powerpoint or a form of drawing. There are hundreds of Google doc templates available in case you want to create a file for a specific purpose. For example, if you want to make a budget proposal in sheets, choose one from Google Sheets templates.
  3. If you want to create a file with a specific purpose, for example, a resume in Docs, a budget plan in Sheets, or a project proposal in Slides, you can quickly get started by using a template.
  4. Don’t forget to give a name or a title to the document you make.
  5. There is a ‘Share’ button on the top right. Once you finished creating and want to share it with others, click on it. You will be prompted to type in their email address. Once you hit ‘Done’, they will receive an email with a link to access the document irrespective of whether they have a Gmail email id or any other.

Another advantage of learning how to create a Google doc or how to make a Google doc or how to start a Google doc is that it brings life to the documents. There are hundreds of smart editing and styling tools that help to format text and paragraphs. You can choose fonts, drawings, images and the best part is everything is available free of cost.

How to Quickly Create New Google Documents with a Shortcut or Hotkey?

The only thing that bothers a person when he or she moves from Microsoft Office and learns how to create Google Docs that creating a new document takes far too many steps. So, here’s a guide on how to make a Google doc with a single click or a shortcut key. This method is valid for all, including documents, spreadsheets, presentations, and drawings.

how to make a Google doc

Create a Windows Shortcut

  1. Start by clicking anywhere on the desktop, and choosing New- a shortcut from the context menu.
  2. Paste the complete URL which can be either of the following if using standard Google docs.
  • http://spreadsheets.google.com/ccc?new
  • https://docs.google.com/drawings/create?hl=en
  • http://docs.google.com/?action=new_presentation
  • http://docs.google.com/?action=newdoc

In case you are using a Google app, they will be slightly different like

  • https://spreadsheets.google.com/a/YOURDOMAIN.com/ccc?new
  • https://spreadsheets.google.com/a/YOURDOMAIN.com/ccc?new
  • https://docs.google.com/a/YOURDOMAIN.com/?action=new_presentation
  • https://docs.google.com/a/YOURDOMAIN.com/?action=newdoc

In these, you need to replace ‘YOUR DOMAIN’ with the actual name of your domain.

  1. Make sure that you’ve created the shortcuts that you want, and named them correctly.
  2. Now comes the time to add an appropriate icon and a hotkey.
  3. If you don’t like the outcome, just right-click on the shortcut and use Properties from the context menu. Flip over to the Web Document tab if you’re not already there. From here, you can customize the shortcut key. Assign a different icon that you would want to.
  4. Hotkeys only work if the shortcut is on your desktop or in the start menu, so make sure to keep them there only.

Creating a Web Browser Shortcut

how to create a Google doc

When you are already in your web browser, logged in and have Google Docs open, you can just use the drop-down menu to create new shortcuts. What if you are not there? In that case, if you want to create a new document, you will have to sign in and then wait for the page to load. Then you will go to the drop-down menu and again wait for the new page to load. It sounds really tedious. If you are a regular user of Google Docs, why not drag the shortcuts whether it is a new Google Doc or a new Google Spreadsheet to your bookmark bar.

If you are using Firefox, you have the option to enter an alternate keyword as well to create new documents using the location bar, but Google Chrome users don’t have that option. They will have to right-click on the location bar and go to Edit Search Engines.

In a new ‘search engine’, just use the URL to create a new Google Document. This way, you can simply enter the keyword into the location bar, and it’ll create a new document.

When editing a document in Google Docs, or when many people are simultaneously working on a document, it is better to use the default highlight option to emphasize important words, sentences, and paragraphs.

Here’s how to highlight in Google Docs.

  1. Open the file in which you want to emphasize particular words, sentences or even paragraphs.
  2. Use your cursor to select the portion of the file you want to highlight.
  3. Go to the formatting bar at the top of the screen.
  4. Click on the ‘Text Background Color’ button.
  5. It has a picture of a highlighter marker on it. Choose the color you want for the highlighting and click on it.

Doing this the particular part that you have chosen will be highlighted in the color of your choice. This is extremely useful in case the person you are sharing your document with wants to read or edit a particular thing or if you want to discuss a particular point.

Google Docs is a wonderful tool when used properly.

Continue Reading