Web
Analytics
Connect with us

Computers

How to Verify your Facebook Page?

Published

on

How-to-Verify-your-Facebook-Page

If you are not new on Facebook then you must have encountered pages and posts on it fairly often. While browsing through the plethora of pages in there has it ever occured to you that you might want to authenticate your very own page, make it appear a little more professional? Well, today’s article on how to verify your Facebook page is your savior!

Facebook is flooded with multiple or similar entries of the same businesses, or people tend to create a lot of duplicate accounts of famous or renowned people. Verification makes it easier to locate the right and the official page and thereby lends a touch of authenticity to the account.

You may observe that many account and pages have Blue Tick Badge. Those pages or account officially verified by Facebook. The blue checkmark gives your page a sense of legitimacy and reputation as a “public figure.”

With this amazing verification benefits, How to Verify Facebook Page or Account is a question that is bound to pop up. Almost every business house and even individuals want to get their Facebook page verified. Let’s discuss the whole verification thing in detail.

Note- In case any unofficial page exist for your business, or there is a duplicate account running by your name, verification is must as it adds much-needed credibility and authenticity to your page.

Like Facebook, you can also verify Twitter Profile. Here is how to get verified on Twitter.

How to Verify your Facebook Page Using Badges

Badge is an official stamp of authenticity and verified Pages would also show up higher in search results. Facebook now offers two different colors of badges as far as Facebook verification is concerned. Take a look:

  1. Grey- Facebook lets local businesses get the gray checkmark now. Business Pages with physical addresses can display a verified gray check mark now.
    How-do-I-get-my-page-verified
  2. Blue- The blue checks displayed on verified Pages are given for celebrities, public figures, sports teams and other media and entertainment organizations.
    How-to-verify-your-facebook-page

However, some global brands may actually have both types of badges. Their main page, i.e. parent page will display a blue badge, while their individual location pages will display the gray local business badge.

Who Can Do Verification?

Many times, Facebook automatically verifies and gives verified symbol. But, this is not the case with all. A lot of people tend to ask time and again that How do I get my page verified?

Ordinary users are not eligible for this verification, and they even don’t need this badge. Take a look at the people or organizations eligible for this badge:

  1. Government Officials
  2. Popular or Global brand/business
  3. Celebrities, Journalist, Entertainment organizations
  4. Writers, Bloggers, etc.
  5. Political Figure or Public figures
  6. Media company or brand

In case you happens to be one of them, Facebook will give you automatic verification itself. There is no need to submit any manual verification request to Facebook. However, there are few requirements that need to be fulfilled.

Verification Requirements

If they find you eligible for verification, they hopefully your profile get verify within few days.

  1. Go to the About Section of your page and under Page Info you will find a tab named Category. Change it to Public Figure.
    How-to-verify-your-facebook-page
  2. Fill in the About Section of your Page or Profile accurately. Fill in all the accurate information about you or your business. Fill in your bio, all the awards if you have received, your e-mail and your cell number very carefully.
  3. If you have an official website, then link your Facebook page from that site.
  4. Make sure that you regularly share content from your website on your Facebook page.
  5. If possible, purchase some Facebook ads or boost your posts.
    How-to-verify-your-facebook-page
  6. Be ready with one of the following documents:
  • Driving Licence
  • Passport
  • Birth Certificate
  • Articles of Incorporation ( if you represent a media, entertainment or sports company)

Some people do have a misconception that Facebook looks out for the number of fans on that official page as a measure for providing verification. This is not the case. Some people get the blue check at 1,000 followers, and there are people with 100,000 who get rejected. Therefore, a number of Facebook followers or fans is no criteria to get a blue tick.

Once you filled all the info, Facebook takes almost 40-50 days to verify your page. In some cases, Facebook took only 4 days to verify the page. So, the timing depends on the situation and cannot be ascertained. The verification status is confirmed by mail.

In the case of manual verification, if your page is disapproved of verification you can always reapply after 30 days again. However, don’t re-apply every 30 days and get internally blacklisted.

Process of Verification via Mentions app

You can also try getting Facebook verification via the Facebook Mentions app. Take a look at the steps:

  1. Download the app and open it up, click ‘Get Started.’
    How-do-I-get-my-page-verified
  2. Just enter your name, and select “My Page or profile isn’t verified.”
    How-do-I-get-my-page-verified
  3. A page will open up, consisting of a form wherein you need to do the following:
  • Select your page name from the drop down menu
  • Upload a photo of your Photo- ID.
  • Enter your website URL
  1. And after filling in the required details, Click Send to finish.
  2. Run short budgeted ads for a week.

You can also use the Mentions app to manage your Facebook page too. In fact Mentions app offers a lot of additional features that are super amazing.

 Conclusion

To have the blue check is a perk, no matter whether it is Facebook, Twitter or Instagram. It adds creditability to the official accounts of notable people. Don’t underestimate the value of the content on the page. Do spend a little effort and time on writing your bio and description. Decide a tiny advertising budget so that you don’t overspend on boosting or promoting your ads.

There are alot of times when Facebook starts showing irrelevant ads. Here is how to hide Ads on Facebook for better Facebook experience.

Earlier it was possible to request verification manually, but as of now this feature is not available on Facebook as Facebook is not accepting the further Manual request for verification at this moment.

One of the main reasons for this is that a lot of people apply through Agencies, PMD’s or other networks agents for Facebook verification. Don’t get trapped by any such agencies as they charge a hefty amount for verification. Simply follow the above methods to get your Facebook page verified.

Facebook is a hub of business houses promoting their products or service. Indulge in Facebook verification and add that touch of authenticity to your page as the process is easy and you can get your badge within just a few days if all the requirements pertained are matched successfully.

If any anonymous person is bothering you on Facebook, you can report the profile to Facebook. Here is how to report someone on Facebook.

Hopefully, you have liked our article on how to verify your Facebook page! If you have any more suggestions or questions feel free to leave them in the comments below, I always keep an eye out for them!

A zealot author, a story teller and a Philocalist who loves to write on various topics trending on social media. She's a work in progress and a budding visual artist.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

OS

How to Remove Programs in Windows 7?

Published

on

How-to-remove-programs-in-Windows-7

Want to remove an annoying application or an application which is taking too much of your system storage or whatever might be the case. The bottom line is that do you want to know How to uninstall an app or program in Windows or How to uninstall program on Windows? if yes, then you are indeed at the right place.

In this article, we will make you aware of the inbuilt windows feature and the third party software which will ultimately help you know how to remove programs in Windows 7? So, let’s get started:

How to remove programs in Windows 7?

Method 1:

Step #1: Windows has an inbuilt feature which lets you remove or uninstall programs in Windows 7. So, this very first step marks the beginning of the procedures required for the same.

So, in order to get started, you will have to navigate to the start section of the Windows 7 and make a click on it. This will open the start menu for you from which you are required to locate the control panel option. In order to make things easier for you, the control panel option is usually found in the right pane of the start menu.

How to Remove Programs in Windows 7

Once you have found the control panel then obviously you have to click on it. This will open the control panel window for you. Now, you can easily go to the next steps for further instructions.

Step #2: Now, as of now, you will have the control panel window in front of you. Based on your personalized view, you might have any of the three views. So, by default, you will have the following window. If you are having this window then you need to make a click on the “Uninstall a program” option which is placed under the “Programs” header.

How to Remove Programs in Windows 7

However, if you have changed your view settings to “large icons” or “small icons” then you will have to search for “Programs and features” option and make a click on it. The outcome of this will be the same as the previous one.

Step #3: After you have successfully completed step #2, you will have the list of all of your installed programs in front of you. Now, in this step, you will have to look for the program which you want to uninstall.

Let’s say, for instance, we want to remove the utorrent application for the system. So, all that we require doing is to select the program by clicking on it. After this, you need to click on the uninstall option positioned as shown.

How to Remove Programs in Windows 7

After this, you will get a usual prompt which will ask you to provide the permissions to uninstall the application from your system.  Just after you have granted the required, you will see the normal rituals you need to perform while uninstalling an application. You need to perform those just by following the onscreen instructions.

How to Remove Programs in Windows 7

Within a while, once you are done with all these, you will have the program removed from your system.

Method 2:

This method involves a third party application named Iobit uninstaller. Though there are many such applications out there I found this tool quite useful and impactful. So, first of all, you will have to download the Iobit uninstaller application on your system.

Step #1: First of all, you will have to download the application on your system. You can either make a Google search or else you can download it from here.

Step #2: Now, once you have downloaded the application then you now need to launch that application. After you have opened the Iobit uninstaller, you will see the list of all your installed programs.

So, now you are required to look for those programs which you want to remove. This uninstaller allows you to batch uninstall a handful of programs at once. So, if you want to make use of that then you can do that as well.

So, in order to install a single application, you need to select that application by clicking over it and then either click on the uninstall button at the bottom or go with the bin icon in front of the program itself.

How to Remove Programs in Windows 7

Step #3: Now, after hitting the uninstall button, you will be prompted to confirm your action. The prompt will look somewhat like this. You need to make a click on the “Uninstall” button in order to proceed forward.

How to Remove Programs in Windows 7

Additionally, if you don’t want to make space for any mishappenings then this tool also provides a facility to create a restore point before uninstalling. So, just in case if any blunder happens you can always restore it to the previous point.

Step #4: Now, after step #3 the usually uninstall wizard of the application will open up and you are now required to follow the onscreen instructions to reach up to the final steps.

How to Remove Programs in Windows 7

Step #5: As the final step, if you wish, you can run the powerful scan option. This powerful scan searches the system against the leftovers of the program which you have just uninstalled which is no longer required. Since those files are primarily considered as junk so, it is recommended that you should run this wizard.

How to Remove Programs in Windows 7

After the scanning, you will be provided with the leftover files and you can now delete those. Just in case, if you do not want to delete some specific files then you can always uncheck such files and delete the rest.

How to Remove Programs in Windows 7

This way, you will have your program uninstalled using a third-party uninstaller.

So, this was all about How to Remove Programs in Windows 7? We hope that after going through this very article, you must be able to do the desired work.

So, if you liked this article, then do let us know through the comments section down below. Additionally, do not forget to give us a thumbs up through our Facebook page and share this as much as possible.

Thank you for giving it a wonderful read.

Keep visiting and stay tuned for more of such informative articles on Windows 7 and others.

Continue Reading

Computers

How to Use Command Prompt Tricks?

Published

on

How to Use Command Prompt Tricks

So, do you want to brag off your computer skills by showing some cool tricks to your friends? Or do you want to become a power user of the Windows operating system? If yes, then you need to know the command prompt and its commands. So, in this article, we will tell you how to use command prompt tricks? But before that let us first know what a command prompt is?

A command prompt is a command-line interpreter for Windows. It is officially called the “Windows command processor”. It is primarily used to execute commands which can help us automate some tasks, perform some administrative functions and some usual stuff.

So, let’s get started by exploring some of the hidden Windows command prompt tricks.

How to use Command Prompt Tricks?

In this section, we will tell you about some cool tricks and shortcuts which you can perform using a command prompt. Some of them are very basic yet handy commands which can be very helpful if you intend to become a power user of command prompt by knowing some command prompt tricks and hacks.

So, let’s get started with the basic ones:

1: Ctrl + C: Well, yeah this is the shortcut command for the copy. But while using it with command prompt, it is used to abort a command. If ever command is executing like forever and you need to stop that then this command will help you get over that.

command prompt tricks

2: Cls: It might happen that there are lots of data on your command prompt screen and you want to clear that in one go. If yes, then the “CLS” command will help you like anything.

All that you require doing is to type “cls” and hit enter and the screen will be cleared.

command prompt tricks

3: Function keys: Function keys are of some great use and can save you some time while working on with the command prompt. Some of the function key features are in correspondence with the arrow keys which in turn possess some of the similar functions.
Here are some of the uses of function keys:

(i) F1: This function key will paste the last executed command to the command prompt terminal. However, there is one thing to take note that the command will be outputted character by character. So, to get the full command, you will have to press the F1 key as many times as it takes.

(ii) F3: This function key has the same function as the F1, but it enters the full command at one go rather than displaying it character by character.

(iii) F5: It pastes the recently executed commands. Even F8 possesses the same function as F5 though it cycles the previously executed commands.

4: Copying text from the command prompt: Ah, you find it difficult to copy some text from the command prompt terminal to your clipboard. Here we are with the solution for the same.

command prompt tricks

So, all that you require doing is to right-click anywhere on the command prompt screen and then click on the very first option from the menu that follows that is; you have to select the “mark” option.

This will highlight the character at the top left corner of your cmd screen. However, you can place the cursor wherever you want. Now, you can select the text till you want just by dragging your mouse till that point. Once you are done with the same, then you now have to hit enter.

command prompt tricks

Now, copy the text as you usually do. See, how easy was that.

5: Network Information: Want to see all your network information. CMD comes to your service and all that with just a single command. All that you need to enter is this “ipconfig /all” and see the information flowing at your screen.

command prompt tricks

6: Watching Star Wars.

This is by far the most interesting cmd command. Yeah, you can watch Star Wars right at the command prompt terminal. For this, you will have to type the following command “telnet towel.blinkenlights.nl.” Also, make sure that you have your telnet feature enabled on your system and if not then you can easily do that by going to the Windows features through the control panel.

command prompt tricks

7: Creating a hotspot using command prompt.

On a personal level, this is something I found very useful. you need to create a hotspot, you can easily do it via your command prompt. All that you need to do is to follow each step carefully and you will be done.

Step #1: Open the command prompt. Make sure to open it with administrative privileges.

Step #2: Type the following command to see if your system supports a hosted network or not. “netsh wlan show drivers“. If you see a yes next to the “Hosted network supported” section then you can proceed further.

command prompt tricks

Step #3: Now type the following command: “netsh wlan set hostednetwork mode=allow ssid=Hotspotname key=password”. Set the Hotspotname and password to whatever you want and then hit enter. After doing that, you will get a confirmation output that the hosted network has been set to allow.

command prompt tricks

Step #4: Now, in this step, all you have to do is to start the hosted network and for that, you have to enter the following command:  netsh wlan start hostednetwork.

command prompt tricks

This will start your hotspot and in case if you want to stop that then type the following:  netsh wlan stop hostednetwork and you are done. 

8: Running multiple commands:

Let us suppose that you want to execute multiple commands in a single go. Yes, it is possible in the command prompt. For this, you only need to place “&&” without quotes between the two commands.
Let’s see an example of this: ipconfig && dir This will execute both the commands simultaneously.

So, this was all about how to use command prompt tricks? We hope that after going through this very article, you must be able to do the desired work.

So, if you liked this article on CMD prompt tricks, then do let us know through the comments section down below. Additionally, do not forget to give us a thumbs up through our Facebook page and share this as much as possible.

Thank you for giving it a wonderful read.

Continue Reading

Computers

How to Make a Google Doc?

Published

on

We all are aware of the fact that Google Drive gives Google users 15 GB of space for free. But not many are aware of the fact that one of the greatest benefits of the Drive is that you’re able to create and share documents with others, even if they don’t have a Google email. Here are the complete details how to make a Google doc in simple steps.

What Is Google Docs?

Google Docs is an online word processor that lets you create and format text documents and collaborate with other people in real-time. Here’s what you can do with Google Docs: Upload a Word document and convert it to a Google document.

How to Make a Google Doc

how to make a Google doc

Here’s how to create a Google doc:

  1. Log in to your Gmail account after opening drive.google.com. Once you are logged in, you will be redirected to your personal Google Drive. This is the place to create, share and hold all your documents.
  2. Click on ‘Create’ on the top left of the drive. You have the option to choose from an Excel spreadsheet, Word document, Powerpoint or a form of drawing. There are hundreds of Google doc templates available in case you want to create a file for a specific purpose. For example, if you want to make a budget proposal in sheets, choose one from Google Sheets templates.
  3. If you want to create a file with a specific purpose, for example, a resume in Docs, a budget plan in Sheets, or a project proposal in Slides, you can quickly get started by using a template.
  4. Don’t forget to give a name or a title to the document you make.
  5. There is a ‘Share’ button on the top right. Once you finished creating and want to share it with others, click on it. You will be prompted to type in their email address. Once you hit ‘Done’, they will receive an email with a link to access the document irrespective of whether they have a Gmail email id or any other.

Another advantage of learning how to create a Google doc or how to make a Google doc or how to start a Google doc is that it brings life to the documents. There are hundreds of smart editing and styling tools that help to format text and paragraphs. You can choose fonts, drawings, images and the best part is everything is available free of cost.

How to Quickly Create New Google Documents with a Shortcut or Hotkey?

The only thing that bothers a person when he or she moves from Microsoft Office and learns how to create Google Docs that creating a new document takes far too many steps. So, here’s a guide on how to make a Google doc with a single click or a shortcut key. This method is valid for all, including documents, spreadsheets, presentations, and drawings.

how to make a Google doc

Create a Windows Shortcut

  1. Start by clicking anywhere on the desktop, and choosing New- a shortcut from the context menu.
  2. Paste the complete URL which can be either of the following if using standard Google docs.
  • http://spreadsheets.google.com/ccc?new
  • https://docs.google.com/drawings/create?hl=en
  • http://docs.google.com/?action=new_presentation
  • http://docs.google.com/?action=newdoc

In case you are using a Google app, they will be slightly different like

  • https://spreadsheets.google.com/a/YOURDOMAIN.com/ccc?new
  • https://spreadsheets.google.com/a/YOURDOMAIN.com/ccc?new
  • https://docs.google.com/a/YOURDOMAIN.com/?action=new_presentation
  • https://docs.google.com/a/YOURDOMAIN.com/?action=newdoc

In these, you need to replace ‘YOUR DOMAIN’ with the actual name of your domain.

  1. Make sure that you’ve created the shortcuts that you want, and named them correctly.
  2. Now comes the time to add an appropriate icon and a hotkey.
  3. If you don’t like the outcome, just right-click on the shortcut and use Properties from the context menu. Flip over to the Web Document tab if you’re not already there. From here, you can customize the shortcut key. Assign a different icon that you would want to.
  4. Hotkeys only work if the shortcut is on your desktop or in the start menu, so make sure to keep them there only.

Creating a Web Browser Shortcut

how to create a Google doc

When you are already in your web browser, logged in and have Google Docs open, you can just use the drop-down menu to create new shortcuts. What if you are not there? In that case, if you want to create a new document, you will have to sign in and then wait for the page to load. Then you will go to the drop-down menu and again wait for the new page to load. It sounds really tedious. If you are a regular user of Google Docs, why not drag the shortcuts whether it is a new Google Doc or a new Google Spreadsheet to your bookmark bar.

If you are using Firefox, you have the option to enter an alternate keyword as well to create new documents using the location bar, but Google Chrome users don’t have that option. They will have to right-click on the location bar and go to Edit Search Engines.

In a new ‘search engine’, just use the URL to create a new Google Document. This way, you can simply enter the keyword into the location bar, and it’ll create a new document.

When editing a document in Google Docs, or when many people are simultaneously working on a document, it is better to use the default highlight option to emphasize important words, sentences, and paragraphs.

Here’s how to highlight in Google Docs.

  1. Open the file in which you want to emphasize particular words, sentences or even paragraphs.
  2. Use your cursor to select the portion of the file you want to highlight.
  3. Go to the formatting bar at the top of the screen.
  4. Click on the ‘Text Background Color’ button.
  5. It has a picture of a highlighter marker on it. Choose the color you want for the highlighting and click on it.

Doing this the particular part that you have chosen will be highlighted in the color of your choice. This is extremely useful in case the person you are sharing your document with wants to read or edit a particular thing or if you want to discuss a particular point.

Google Docs is a wonderful tool when used properly.

Continue Reading

Macs

How to Screen Shot on A Mac?

Published

on

Owning a MacBook is a matter of pride for most people. In fact, those who own one, love to flaunt it! And what better way of showing off the software of your snazzy laptop other than taking a screenshot. Now I know, the very utterance of the word screenshot might cause confusion in the minds of those who aren’t so technically inclined, so let me first explain what a screenshot actually is.

We all know and love selfies, right? Well, consider a screenshot as a selfie, but from the perspective of your Macbook. Your laptop has the ability to take a picture of what is going on in its screen at any given moment, and this picture is what we call a screenshot! So now that you have an idea what a screenshot is, let’s figure out how to screenshot on a mac.

How to Screen Shot on A Mac?

Screenshots are very useful nowadays. Screenshots can be used to make people understand something better, or it can be used as evidence or memory as well. Here we have discussed how to take a screenshot on a Macbook.

#1. How To Take Screenshot of The Whole Screen of Mac?

how-to-screen-shot-on-a-mac

Share with your friends your high score of any game you play. How do you tell them usually? Send them screenshots instead of calling them. If you want to take a screenshot of the whole screen of your Mac, you have to follow the following steps given below:

Step 1

At first, you have to open or go to the page on your Mac you want to take the screenshot. Check whether your screen has all those things you want to take the screenshot.

Step 2

Then press the keys  Command key and Shift key and three key all together at the same time.

Step 3

A camera would click the sound, and the screenshot will be taken. You can find it on your desktop in .png format, with this type of title Screen Shot [Date AND Time].

Step 4

You have to double click on the screenshot in order to open or view it, and you can share it with the Preview option.  You may also right-click on it and choose Open With the option, or drag and drop it, to open and share it with any other app.

#2. How To Take a Screenshot of part of your screen of Mac?

how-to-screen-shot-on-a-mac

Sometimes taking the screenshot of the whole screen is not a good idea at all. No problem, print a part of your screen this way,

Step 1.

Press the Command key and Shift key and 4 together. The pointer will be changed into a crosshair pointer.

Step 2.

Then move the crosshair pointer to the portion where you want to start the screenshot.

Step 3.

Then drag it to select an area. When you are dragging, you can hold the Shift key or Space bar in order to change the way the selection moves.

Step 4.

Once you have selected the area you want to pick, release your mouse or trackpad button. If you want to cancel, press the Escape (Esc) key before you release the button of mouse or trackpad.

Step 5.

You will get the screenshot as a .png file on your desktop.

#3. How To Take A Screenshot of A Menu?

how-to-screen-shot-on-a-mac

Do you want to take only the screenshot of the menu? Here are the ways shortlisted for you.

Step 1.

At first, click on the menu button and open the menus you want to take the screenshot of which. Check whether your menu contains all the parts you want to keep in the screenshot.

Step 2.

After that press on the Command key, Shift key, and 4 key all together. The pointer will change into a crosshair pointer.

Step 3.

You have to drag it in order to select the menu.

Step 4.

Now release your mouse or trackpad button. If you think you do not need the screenshot; in order to cancel it, press the Escape (Esc) key before you release the button of mouse or trackpad.

Step 5.

You can find the screenshot as a .png file on your desktop.

#4. How To Take a Screenshot of A Menu Without The Title?

Step 1.

First, click on the menu to open and get the appropriate content. Check whether your menu contains all the parts you want to keep in the screenshot.

Step 2.

Next, press the  Command key and Shift key and  4 key all together at the same time. The pointer will be changed into a crosshair pointer.

Step 3.

Then press the Space bar. It will change the pointer into a camera pointer.

Step 4.

Now move the camera pointer over the menu to highlight it.

Step 5.

After that, click your mouse or trackpad. If you feel like canceling it, press the Escape (Esc) key before you click the mouse or trackpad.

Step 6.

You will get the screenshot as a .png file on your desktop.

#5. How To Take A Screenshot of A Window?

For the windows, the processes are the same as taking screenshots of a menu without the title. They are –

Step 1.

First, press Command key and shift key and 4 together. The pointer will be changed into a crosshair pointer.

Step 2.

Now press the Space bar. It will make the pointer be changed into a camera pointer.

Step 3.

Then move the camera pointer over a window to make it highlighted.

Step 4.

After this, click on your mouse or trackpad. If you want to cancel it, press the Escape (Esc) key before you click the mouse or trackpad.

Step 5.

You can find the screenshot as a .png file on your desktop.

We hope that this article has helped you in your quest about taking  screenshot on a Mac.

Moreover, if you are left with any kind of feedback or query, then do let us know by dropping a line in the comments section right below. We would love to hear from you about your thoughts on how to screenshot on a Mac Share this article on your social media if you find this article helpful.

Continue Reading

Windows

How To Delete Windows.old Folder?

Published

on

In order to learn how to delete windows.old folder, it’s important to know about windows.old first.

For those who are completely oblivious of what is windows.old folder, let me give a quick introduction to it!!

Have you ever upgraded your windows from windows 7 to windows 8, 8.1 or 10? I’m sure you have. We all do this by time to cope up with the upgraded technology and to get full benefits out of the new windows.

While upgrading windows, what you think where your old windows files go?? Do they get deleted, or replaced??

No matter if your answer is deleted or replaced, I’ll have to tell you that you are wrong!!

None of them happens to those files, neither they get deleted nor they get replaced by the newer version. Instead, all these files of your older windows get stored in the windows.old folder. And needless to say, this folder occupies a lot of space on your hard drive unnecessarily up to 20GB or more.

Windows.old folder, however, gets deleted itself within 28-30 days of the upgrading of the window but if you want to have full control over your computer and thinking can I delete windows.old, then my answer is YES!! You can delete windows.old folder very easily.

Although, deleting windows.old is not a tough job but you can’t just delete it just by right-clicking on it and then select the delete option like we do while deleting any other folder on the computer. In order to remove windows.old, you need to follow the below-given steps. Here’s how to do that.

How to delete windows.old

Windows.old folder contains all the important system files and installation programs of your previous windows to let you downgrade your windows if you are not happy with the upgraded one.

Therefore, think twice before heading to delete this folder. Without it, you can’t go back to your previous windows no matter how hard you try and this action can not be undone.

One more thing, be quick to decide if you want to downgrade your windows or not. Because of windows.old folder gets deleted by the newer Windows version within 30 days as I told you above.

Now without any further delay, let’s figure out how to remove windows.old. folder.

Step 1: – You can delete window.old file by performing disk cleanup. So to reach out to disk clean up wizard, click on the start menu and search for “Disk cleanup” in the search box.

How-To-Delete-Windows.old-Folder

Else, you can also launch a Disk clean up wizard by right-clicking the C drive on your computer. Then you need to go to the Properties, and then Disk Cleanup button under the General tab. Have a glance at the screenshot to understand it better.

Step 2: – The disk cleanup tool will take a few seconds to analyze the files to be deleted on your computer and will present them to you. Here, you don’t need to do anything.

Simply click the Cleanup system files button located on the bottom of the window. The screenshot is given below, take help of it if you can’t find the option.

How-To-Delete-Windows.old-Folder

Step 3: – Once the scanning is done, scroll all the way to down to find the “Previous Windows installation(s)” option under “Files to delete. That’s the windows.old folder we are trying to wipe out from our system.

Just move your cursor over the checkbox next to this option and press Ok to start the cleanup. In the case of any doubt, refer to the above screenshot!

Step 4: – In the confirmation dialogue, just click the delete file button and you are done.

That’s it!! Yes, the method is that simple!

In case, if you don’t want to use the inbuilt disk clean up tool, there are certainly many third-party tools available in the market like CCleaner which can be used for the same purpose.

The method to use such tools is also simple. Just download that tool from its official website, install it on your computer and scan for the deleted files.

When you get provided with the deletable files, just scroll down to find the Previous Windows installation(s) option. Mark, it checks and clicks on clean up to delete that folder.

The steps can vary a little from software to software but the method is almost the same for all the tools.

The third method you can use for deleting windows.old folder is the command prompt. The steps for this method are given below.

#Deleing window.old using command prompt:

However, you can easily delete that folder from the above two methods but some people like to play around the command prompt. So we are specifying the steps below specifically for you in case you want to delete windows.old folder using the command prompt.

Step 1. In order to open CMD, click on the start menu, and type CMD in the search box. On the top, you’ll see CMD under programs. Now right-click on it and select the option Run as administrator. Soon after, the command prompt will be launched.

Or simply press Ctrl+Shift+Enter keys while typing cmd in the search to open command press as an administrator directly.

 Step 2. Once the command prompt is launched, type or copy-paste the following command there and press enter windows.old folder will be wiped out from your computer.  

RD /S /Q %SystemDrive%\windows.old

All these methods perform the same tasks, you can use any one of them as per your convenience. I surmise you have got all your doubts clear regarding how to delete windows.old. 

Windows.old folder is useful as long as you are not satisfied with the latest version of windows. But if you have tested the features of the new windows and have decided to keep these windows on your computer, its time to get rid of this folder and vacant space occupied unnecessarily.

But perform this action very carefully since you can’t revert it back.

So, it’s time for me to wrap up the guide here. If you are encountering any issue while following the steps, just hit your query in the comment box. And if you find the guide useful and worth sharing, go ahead!

Continue Reading

Trending