Do you want to know how to rotate a video? If it is a yes from your side, then you are at the right place.
In this article, you will get to know about the windows media player rotate video.
So, let’s get started:
How to Rotate a Video in Windows Media Player?
If you are looking for any such method with which you can rotate a video in windows media player, then there is exactly no way to do that. However, we can certainly go the other way round.
Many alternatives are using which we can achieve the same purpose like we can rotate a video using Windows Movie Maker, which is a video editing program developed by Microsoft itself.
Additionally, we can make use of VLC media player which is quite a popular video player. VLC media player is also capable of rotating videos.
So, let’s see how to rotate a video in Windows?
Method 1: Using Windows Movie Maker
The prerequisites of this approach are a video which you want to rotate and windows movie maker application on your Windows operating system. You might need to download and install Windows Movie Maker on your system manually because it comes no longer pre-installed with windows.
Once you are loaded with all these, then you are right to get started with the process.
Step #1: As the very first step of this method, you need to launch the Windows movie maker on your system. For this, you will have to double-click on the Windows movie maker icon, and this will open it for you.
Step #2: Now, in this step, you are required to open your video in Windows Movie Maker. For this, you will have to import the video from the source destination to the dashboard. To do this, you will have to navigate to the home tab and then under the add section; you need to click on the “Add videos and Photos”.
Now, you will have to locate your desired video file, and once you have located it then, you need to double click on it. This will import the file to the dashboard.
Step #3: The steps from now on are quite basic. Under the editing section of the home tab, you will find “Rotate left 90” and “Rotate right 90.” All that you require doing is to click on the desired options which will rotate your videos on the 90-degree basis.
Step #4: Once you are done with the rotations and editing then as the final stages you are to save the video. For this, click on the icon which is positioned at the extreme left corner of the window. This will open a drop down menu for you from which you have to select “Save Movie”.
This way you can quickly rotate a movie sung Windows movie maker. Please take a note that in older version of Windows movie maker comes with a name of Windows live movie maker. So, don’t get confused.
Method 2: Using VLC Media Player
VLC media player is like a must have tool. It has lots and lots of features because of which it is quite popular. You can take a snapshot using VLC and did you know that you can rotate a video using VLC media player. If not then we will tell you how to rotate video using VLC media player.
Step #1: Open VLC media player and also the video which you want to rotate.
Step #2: Now, navigate to the tools tab and click on it. This will open a menu for you from which you are required to select “Effects and Filters.” This will open a window for you titled as “Adjustments and Effects.”
Step #3: From the “Adjustments and Effects” window, you have to click on the “video effects” tab. This will introduce a section on the same window with some additional tabs. From those tabs, you have to navigate for “Geometry” tab. Once you have found the same then, you are required to click on it.
Step #4: Now, just below the interactive zoom, you will see an option named as “Transform.” To select that, you will require checking the corresponding checkbox. This will make the transform section active. Now, you can rotate the video by clicking on the box which has “Rotate by 90 degrees” written on it.
Your recent activity will open a drop-down menu for you from which you can select your desired transformations.
You may also see another option as “Rotate” which is followed by a rotating dial in an inactive state. To make it active, you will have to check the checkbox next to it and by making use of the dial, you can freely rotate your video to whichever direction you want.
Once you are done with the same, then all that you require is to click on the close button.
Remember that the changes will not be on a temporary basis and the changes will reflect on your original file. However, you can change the transformation anytime using the same method. The raw video file can be of large in size and it is almost impossible to share the raw video anywhere on the social media nor you can send video via email. In that case, you may need to compress the video file. If you wanted to compress a large video file without sacrificing the quality, well, you can easily do that.
Alternatively, there are many exclusive software which is specially designed for this purpose or online services like rotatemyvideo.net. All that you require is to upload the video on their server and then rotate it as you want. Quite simple, ain’t it.
If you are familiar with any of the video editing tools like Adobe Premiere Pro or iMovie, then you can also use them for the same purpose.
With this, we have reached the end of this article which equips you with the knowledge about how to rotate a video in windows
We hope that by going through this article, you will be able to opt for the appropriate platform which will serve the needful for you.
If this article has helped you in your quest of how can I rotate a video then do not forget to share it with your peers. You can also share videos on Youtube. If you don’t know how to upload videos on youtube, you see check the provided link.
How do you rotate a video? If you know, any other methods then do let us know through the comments section below. Your addition is highly appreciated.
Thank you for passing by and giving it a read.
How to Create Personalized Start Button for Windows 8?
Its a quite a few months since the Windows 8 has launched. If you are among those people who love to have a Start button still in windows 8, then here we are providing you a classic tip “How to Create Personalized Start Button for Windows 8?” Yes you have certainly came across several apps, softwares and extensions. But this is a complete different new dimension. Protecting your computer is also crucial. See 3 best antiviruses for Windows 8 that will definitely going to protect your computer from harmful virus.
While you won’t have to go traipsing around the registry in order to implement this technique – I already did that – you may be curious as to where the CLSID came from. Essentially, a CLSID key is a part of the registry that contains code that provides access to specific system objects in the operating system, such as system folders. The CLSID keys can be found in two places in the Registry:
HKEY_LOCAL_MACHINESOFTWAREClassesCLSID and HKEY_CLASSES_ROOTCLSID.
Now, under normal circumstances, you would never need to use a CLSID because it is specifically designed to be used by developers and the operating system. In fact, a CLSID is a 128 bit Hexadecimal number enclosed in braces, so it’s not very user friendly.
In any case, the CLSID that provides access to the Apps screen is
To use the CLSID to launch the Apps screen, you’ll use the Shell command. In order to launch a Shell command from a shortcut, you need to use the explorer.exe command. As such, the shortcut to launch the Apps screen consists of the following command line. (Take note that there are three colons between the word shell and the left brace. Also keep in mind that there is only one space in the whole command line between the .exe file extension and the word shell.)
To create the shortcut, just open the Documents folder, right-click on the background, and choose the New | Shortcut command. When you see the first screen in the Create Shortcut wizard, type the shortcut in the text box.
When you see the second screen in the Create Shortcut wizard, type a short name for your shortcut.To complete the wizard, just click Finish. As soon as you see the shortcut icon, right click on it and select the Properties command.
When you see the Properties dialog box, click the Change Icon button to open the Change Icon dialog box. By default the Change Icon dialog box displays the icons from the explorer.exe file. As you can see, none of the available icons are very exciting. However, if you click the Browse button, you can search for other files that contain icons.
Once your custom Start button appears on the taskbar, drag it all the way to the left side of the taskbar. So here you are with what you want to have. So go on and enjoy “Windowing”!
Tired of entering passwords again and again. See how you can remove passwords from Windows 8 to log in to your computer without unnecessary passwords.
How to Access iPhone VPN?
iPhone is a product of Apple Inc. which is surely a whole lot more than a communication device, as one can run and play a variety of games, run entertainment and business applications etc in the best possible manner. It is designed in a way to facilitate people of every age group.
Besides everything else, one is also allowed to access the internet from his iPhone from any remote location, however if you are willing to run internet from any random location it is really very important that you should access iPhone VPN and start using it in order to avoid any problem, and this is because using any public Wi-Fi is surely not safe, as you would be giving a space for the hackers and intruders to get into your iPhone and steal / corrupt its data, hence iPhone VPN not only allows you to browse over the internet safely, but it also allows you to access any website even if it is not available in your region.
A good number of iPhone users really don’t know how to access iPhone VPN from their iPhone devices, and in the following lines, you will get to know its method of access. And if you are really new into iOS, you may need to look for the ways to close the iPhone App.
Tapping Under VPN Network:
In order to enable iPhone VPN, all you have to do is to tap the VPN option that is found under the network option.
Adding VPN Service:
After you have entered into VPN settings, now the next thing that you need to do is to Add VPN service, as without that it is not going to work. For configuring iPhone VPN service go with the option “Add VPN Configuration” and then by clicking over defined protocols in your iPhone.
Configuring VPN service:
In order to get iPhone VPN service working for you, all you have to do is to enter all the configuration information that is offered to you by your respective company. This information includes the following details:
- Account Name
- Encryption Level
These are the three details that you need to mention in your iPhone VPN at any cost, however, there might be other details too that you need to enter or VPN services require you to enter, but above-mentioned details are known to be the basic ones that should be filled at any cost.
If you think that you are not able to do that on your own, and you might mess up the configuration settings than it is highly recommended that you should get it done by other techno-geek who is already using such service. You will surely find one in your workplace, neighborhood, friends and even in your family who will be more than happy to assist you in that and fill all the required information on your behalf, hence allowing you to make the most out of it.
So that’s the procedure to access iPhone VPN and making it works for you in the best possible manner. The best thing about this is that it won’t take more than 30 seconds in order to get the entire job done (including entering details). If you don’t want to share your location on iPhone, you can turn off the location service on iPhone after which no app or service can track your location.
How to use BitLocker to Encrypt your Files
Locker means a safe place where you can put your personal or important things hiding from others. We all have some things which we don’t want to share with others same as in the computer you have any important data that you want to hide from the outside world. For that, there are many software available over the web and as well as well-known by you so no need to describe it.
But if you want to lock your Hard Drive partitions without any software then? In that case, Microsoft has provided one wonderful tool known as “BitLocker” in Windows Vista, 7 and 8 for encrypting your entire Hard Drive partitions. Using BitLocker you can lock any volume on the computer even the one you boot from. But a question arises in your mind that How to use it, right? So, I will show you two different modes to use BitLocker on your computer. If you wanted to Defrag the Hard Drive, you should see that.
1. “How to use BitLocker on a normal/data volume”
2. “How to use BitLocker on Boot volume”
Let’s see the first mode:
1. How to use BitLocker on a normal/data volume?
A simple way to enable BitLocker – right click on any volume and select “Turn BitLocker on” to start the locking process. After clicking a window will pop-up (as shown in the figure below) asking to enter a password to use with the drive – you will also ask to say a copy of the recovery key somewhere at safe place and then it will begin encrypting your drive.
By this method you can lock all the drives on your computer except “C:/ drive” or “Boot partition”.
Now, the second mode:
2. How to use BitLocker on Boot volume
Yes, it is true that you can encrypt the main operating system drive, but this has some special requirements since the drive has to be unlocked before boot. First of all this requires that Windows has a seperate boot partition that isn’t encrypted; in case if you don’t have then create a separate boot partition. The second requirement is that your system include a TPM (Trusted Platform Module).
If you try to encrypt your boot volume without satisfying the above to requirement then it will give an error as shown in the figure below.
So, in that case you will need to configure your system to use BitLocker with a TPM. Here is how you can do that.
- Press [win + r] and type “gpedit.msc” in it and press enter to launch the Local Group Policy Editor
- Now, browse to – “Computer Configuration > Administrator Templates > Windows Components > BitLocker Frive Encryption > Operating System Drives
- In the right panel. double click the setting “Require additional authentication at startup” and select “Enabled”
- In that please check the below options that “Allow BitLocker without a compatible TPM…” is checked.
- Then, Click Ok – you are done.
Now you will able to start the BitLocker process on your system drive, and will have the option to either enter a password on startup or insert a USB drive to boot.
If you have any problem regarding “BitLocker” then put your comments below so that I can surely help you to get rid out of your problem. Hope this guide helped you to understand how to use BitLocker.
PC taking more startup time? Change the Startup program to boost the startup process in windows 7.
How to Speed up the Start up Process for Windows 7?
Microsoft Windows is undoubtedly the most popular ever operating system for desktop PCs. Though new Windows 8 is out since a year or so, there are plenty of people who still use Windows 7 OS. Electronics, Computing, Communication and Information technology are the fields that change rapidly over the span of time. User has just adjusted to a system and he/she will have a new update in the same segment. There are two aspects to this phenomenon and requires another post to give justice. If you are one of those users who still have Windows 7, you may have noted a fact that it takes a bit long to start up. Sometime it may irritate you. But nothing to worry, here we are once again to help you with proven tricks along with screenshots.
I personally believe that Windows is a system that has plenty of hidden features may be due to the reason that Microsoft provides higher privilege to their users as compared to other Operating system developers. So using those hidden tricks here we are with a tutorial How to Speed up the Start up process for windows 7? Tired of using Windows 7? Upgrade Windows 7 to Windows 8 using the Dual-boot method.
If you are editing registry don’t mistype anything, otherwise, it may cost you in form of crashed window. So perform this operation with optimum concentration and confidence too!
Find run option in your windows. If you can’t find it try this… Windows key + R
After that you will find a box titled Run, and space with a writing curser
Type “Regedit” or “Regedit.exe”
Click Ok or Press Enter
A window titled User Account Control (UAC) will appear. Click yes on this window.
Now you will find a registry window.
- On the left side of the Window, locate the key “HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSessionManagerMemoryManagement PrefetchParameters.”
- In the right pane, double-click EnablePrefetcher.
- Change the value to 2 and click Ok.
- In the right pane, double-click EnableSuperfetch,
- Change the value to 2 and click Ok.
- After done with all these settings close the Registry.
- Restart your system in order to configure the changes.
So here you are with your Windows 7 which really start up faster. Feel free to suggest us or review our tutorial. We are open enough to criticism also. If you don’t know how to boot the computer in Safe mode, you should see that.
How to Find IP Address on Mac?
It’s important to know the IP address of your Mac as it comes handy when sharing files or setting up a network. For instance, you might need it when you are setting up devices like printers on a network. IP address also helps in safeguarding your system against malware.
If you’re looking for an efficient guide to learn how to find IP address on Mac, you can discover more than one way in this article.
When a Mac is linked to a network, it’s assigned with a network address known as IP address. It’s typically 4 sets of digits parted by periods with around 3 digits per set.
If the Mac is linked to the internet as well as a network, then it will have two IP addresses: one external address for the internet connection and one internet to indicate its location on local network. In the following sections, we’ll look into some ways to find the internal IP address as well as External IP address.
See Also: How to Fix IP Address Conflict
How to Find IP Address on Mac
As a new Mac user, I was also struggling to find my IP address, but now as an experienced user I am capable of guiding the other new Mac users through several ways to find it. Read on to find out some of these effective ways.
Find Internal IP Address for Mac OS X 10.4
Go through these five steps and soon you’ll know how to find IP address for Mac very easily.
- On the screen’s left upper corner, you can find on Apple icon. Click on that.
- Scroll down and choose System Preferences.
- In the System Preferences screen, on the third row, you will find the option Network. Click on that.
- Choose your connection. You can choose the one that you wish for the IP address in the Show menu. Drop down on the menu to find the different connections. If your connection is wired, select built-in Ethernet. If your connection is wireless, select Airport.
- Select the TCP/IP tab to display your Mac’s IP address in the Settings window.
With that simple procedure, you no more have to be concerned about how to trace an IP address on Mac OS X 10.4.
Find Internal IP Address for Mac OS X 10.5 or Higher
What if you are working on Mac OS X 10.5 or higher versions? The process to know the IP is quite easy for that too! Here it is!
- Select the Apple icon on the screen left upper corner and scroll down to choose System Preferences just the way you do with OS X 10.4.
- Select Network option from the third row.
- Choose your connection. Normally, you will be linked to the network through Ethernet (wired) or AirPort (wireless). The connection that’s actively being used will display ‘connected’ near it. You can find your Mac’s IP address right here beneath the connection status. Usually, the connection that you are using will be chosen by default.
Now, doesn’t that sound simpler than how you found the IP address on OS X 10.4?
Find the Internal IP through the Terminal
Here’s how to find IP address on Mac via the terminal. This is one of the best and quickest ways for users who are technically inclined.
- Access the terminal, which can be seen in the Utilities segment of the Application folder.
- Use the command ifconfig, which usually results in plenty of unwanted and confusing data being displayed. If you want to avoid the unnecessary data, you can use a command in the below format to know just your internal IP address: ifconfig | grep “inet ” | grep -v 127.0.0.1. This command eradicates the 127.0.0.1 entry, which pops up always irrespective of the system you are using. You can ignore this feedback loop when you want just the IP address.
- The IP address of your Mac can be seen near the ‘inet’ entry.
That’s the terminal’s way to find a Mac IP address.
Find the External IP Address
Now that you know different ways to find external IP, we’ll move on to learn how to get IP address (external).
- Access the configuration page of your router. Most of the routers can be opened via a web interface as this is where you can see the settings and adjust them. Access the web interface by entering the IP address of the router into a browser. Check the documentation of your routers for the particular address. Some of the common router IP addresses are 168.1.1; 192.168.2.1 and 192.168.0.1.
- Access the status of your router. The external IP address location will differ from one router to the other. A majority of them have it listed in the Wide Area Network (WAN) status or Router Status.
- Under the Router Status’ Internet Port, you can find your IP address listed. This is your router’s IP address. Any connection that’s made from your router will possess this address. Your internet service provider assigns this IP address. A majority of the external IP addresses change often and hence are dynamic in nature. Proxies can be used to mask this address.
- You can also perform a simple search on Google with the phrase IP address. This will display your public or external IP address as the first result.
So, now you also how to find an IP address (external) on Mac.
Now that you’ve learned a plethora of ways, you can also guide your friends about how to check IP address on Mac systems. You might also want to learn to change IP address – Mac systems have a plenty of methods available for changing the address too!
You can find several guides for this as well!
Look out for more such guides to learn more about your Mac system – within a few months, you are likely to be an expert in handling Mac-related issues and can quickly be on your way to troubleshooting them.
For now, if you get stuck up anywhere while executing the above-discussed ways to find your Mac system’s IP address, drop your queries in the comments section below and our experts will clarify your doubts.
More similar posts:
How to Manage Optional Features in Windows 10?
How To Download Kindle For PC
How to Access iPhone VPN?
How to Reset Macbook Air?
How to Solve Yahoo Mail not Working?
How to Use Apple Thunderbolt Display with PC?
Computers2 years ago
How to Reset Macbook Air?
Tech1 year ago
How to Solve Yahoo Mail not Working?
Mac4 days ago
How to Use Apple Thunderbolt Display with PC?
Tech1 year ago
How to Make a Yahoo Account Without a Phone Number?
iOS1 year ago
How to Stream Torrents on iPhone?
Tech1 year ago
How to Tame a Horse in Minecraft?
Tech1 year ago
How to Receive Money through PayPal?
Windows2 years ago
How to check RAM type (DDR, DDR2 or DDR3) in Windows?