Web
Analytics
Connect with us

Tips

How to Remove Gogletab in Google Chrome?

Published

on

Annoyed by the Gogletab.com homepage. You might have installed it because it sounds similar to GoogleTab, Right. Well, it happens. Anyway, if you are looking for how to remove Gogletab in Google Chrome, then you are at the right place.

So, let's start:

How to Remove Gogletab in Google Chrome?

To begin with, let us first tell you what gogletab.com is? It is a fake web page with suspicious nature. It has a look alike very similar to the famous search engine Google. This is why many of us do not question its presence.

The reason why you may want to remove it from your system is that once your system is affected by this Gogletab, you may get annoying redirections and your system might get exposed to vulnerable sources. It is a kind of internet virus which many times gets into your system through dubious installers and other sources.

One may also call it an adware which often hijacks your browser. Gogletab may not delete anything from your system but is a potential threat to your system, undoubtedly. Once you have it on your system, you will see malicious redirections, pop ups and annoying ads on your browser. The bottom line is that once your system has it, it completely ruins your internet browsing experience. This is why it becomes necessary to get rid of it.

So, in this article, we will tell how to get rid of Gogletab.com from Chrome and other browsers. So, let's gets started with it.

 

Method 1: Disabling Suspicious Extensions.

Step #1: The very first method includes removing all the suspicious extensions from your Chrome browser. They are the mightiest source for Gogeltab.com to enter your system. So, to get access to the extension panel, you are first required to launch your Chrome browser. To do so, double-click on the Google Chrome icon and this will launch the Chrome browser for you.

Once done then you are now requested to move on to the next steps for further proceedings.

Step #2: Now, you need to click on the three dots icon positioned at the top right corner of the browser. From the menu which follows up, you are required to select “Settings.” This will open a new window for you.

How-to-remove-gogletab-in-google-chrome

Step #3: In this step, you need to navigate to the left pane of the window and then select “Extensions” from there. This will lead you to a window where you will have all of your extensions out there. Now, what you need to do is to look for any recently installed suspicious extensions. Once you have identified them, then you now need to delete them by clicking on the trash bin like icon just next to the name of the extension.

How-to-remove-gogletab-in-google-chrome

Alternatively, you can get straight to the extensions window by using this shortcut which goes as “chrome://extensions/“.

How-to-remove-gogletab-in-google-chrome

It may happen that even after doing the above-mentioned steps, you are not able to get rid of the Gogletab.com extension from chrome. This is just a probable method in case the Gogletab.com adware has entered onto your system through the extensions. If it has then this method will surely work out. If not then you are requested to look for our next method.

Method 2:

Many times, it may happen that any installer concerning Gogletab.com has modified the target field of the Google Chrome target shortcut. To check it, you need to follow the following steps:

Step #1: In this very first step, you are required to locate the Google Chrome shortcut on your system. Once done, you are now required to make a right click on it and from the menu which follows up; you need to select “Properties” which is the last option.

How-to-remove-gogletab-in-google-chrome

Now, look for the next steps for further processes.

Step #2: After the first step, you will have the properties window in front of you. In the particular window, you will have the “Shortcut” tab open by default. This is all that we require.

How-to-remove-gogletab-in-google-chrome

You now need to locate the target field. Once you've reached there, then you now need to examine the target field carefully. If ever the target field is modified by any Gogletab.com installer then you will see some occurrence of www.gogletab.com after “C:\Program Files (x86)\Google\Chrome\Application\chrome.exe“. To get rid of it, you need to delete any such instances and once done, click on “Apply” and then OK.

Method 3:

If both of the methods doesn't work for you, then you should give this method a try. In this method, we will reset the settings of Google chrome and change the default homepage also. So, let's begin with the process:

Step #1: If your browser is injected with Gogletab.com then your default home page or search engine would be it only. So, in order tp get rid of it, you should change the default search engine settings. To do that, you first need to go to the three dots icon at your extreme right corner and the click on it. Once done then select settings from the menu.

Step #2: Now, navigate to the search section and click on the “Manage Search Engines..” button.

How-to-remove-gogletab-in-google-chrome

This will lead you to a window where you will have the list of available search engines. Since you have Gogletab.com on your browser, then you may see it as the default one. Go on and select any other engine which you like and then click on “Make default.”

How-to-remove-gogletab-in-google-chrome

This will change your default search engine for you.

 

Method 4:

You can alternatively use the chrome cleanup tool. For that, you can follow the following link, download, install and run it. This will help you to get the needful.

How-to-remove-gogletab-in-google-chrome

 

So, this was all about How to remove gogletab in google chrome? We hope that this might have helped you in your quest of how to remove Gogletab.com homepage?

If you liked this article, then do let us know through the comments section. We would love to hear from you. Also, share this article amongst your peers.

Thank you for crossing by and giving it a read.

Stay tuned and keep visiting for more.

 

A student of life, writer, technology freak, and a thinker.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Facebook

How to Find Someone On Facebook Without Logging In

Published

on

By

With more than 1.5 billion users, Facebook has been something beyond a mere social media website. You have to be very lucky to find a friend who doesn’t use Facebook. This popularity has been helping people for a while now.

Many children have got their parents back only through Facebook. And, today I am here to share helpful info with you that’s how to find someone on Facebook without logging in.

You may think that it’s not possible. But you are wrong! To find someone, you don’t have to be online.

How to Find Someone On Facebook Without Logging In

I am going to share five different methods on Facebook search for people without logging in. Don’t think these processes need geeky people to get it done. You can do it without any help from others within a few minutes.

Are you ready to know how to find someone on Facebook without logging in? Here we go.

Method 1. Search on Google

Google is everyone’s go- to- place when we have to search for something. That’s why I am starting with this method. You can quickly find public profiles on Google with a specific search operator.

If you are a blogger, you may probably know that there are several search operators available for Google to make every search query satisfying. Follow the steps given below to find anyone on Facebook.

Step 1: Go to google.com and click on the searching text field to enter text.

Step 2: Type “sitename:facebook first name last name” without quotes. Replace the first name and last name with the complete name of the person you want to search for.

Step 3: Press Enter or click the Google search button. You can see the search results and obviously you will get what you are looking for, as the first result.

Check the image given below to have an idea. I have searched for Kulwant Nagi, and I got his Facebook profile without any worry.

Method 2: Use People Search from Facebook

The best idea to find someone on Facebook is to use Facebook itself. Fortunately, Facebook has been providing a People Search service for a while now. You can use this service to find anyone.

Follow the steps given below to find people on Facebook right away.

Step 1: Go to Facebook People Search by clicking here. You can see a text field to enter the name and some alphabets beneath it.

Step 2: Alphabets can be used to find popular profiles as you can’t find an ordinary person using them.

Step 3: Type the name of that person ( the one you are looking for) into the field given. Then, click the search button right next to the field. Or else, you can press Enter key.

Step 4: You can see a page up to 10 people matching the name you have inserted. If you don’t see the exact person you want, try the process after adding the city, educational qualification or any detail you know about him/ her. It will increase the process of ending up in right result.

Hurray! That’s all.

Method 3: Use Social Searcher

Some people don’t like using Facebook. So they choose to stick with other social networks only. In such occasion, searching only on Facebook doesn’t help. So, you have to search on every network altogether.

Social Searcher is the solution here. You can search for almost every popular network.

Step 1: Go to social- searcher.com. It’s the tool to find social profiles.

Step 2: You will be provided with a text field. To find a social profile, you don’t have to log in or provide access to of your social media accounts.

Step 3: Insert the name of a person or brand you want to find the social media profile or page. Then, press Enter.

That’s all. You will find profiles from at least ten social media accounts.

Method 4: Use Facebook Directory

Sometimes, you may have to look for pages, topics or places. Facebook provides another tool for this. It’s Facebook directory.

Click here to visit Facebook directory. There, you can see a search field. There, you can see three tabs including people, pages and places. Click on the one you want to search.

Then, type the name and press Enter. That’s all. Unlike Facebook people search, you will see pages, people or places with matching names.

But you can’t find every profile using this option. Why because it is possible to prevent Facebook bots from fetching a profile with a simple privacy tweak on the account settings.

Method 5: Use a Browser Extension

I have already given you four methods that help you find anyone on Facebook even without logging in. I hope you make use of it easily. If you find none of them is convenient for you, you can use this method.

Here, I am going to introduce a browser extension to you using which you can find anyone on Facebook. As Google Chrome and Mozilla Firefox are the two popular browsers, I have chosen one that’s available for both of them.

Use the links given below to download the browser extension. (I have specified Chrome and Firefox extensions).

Chrome Link

Firefox Link

After the download, you can see that the extension gets added to the browser. Use the icon on the toolbar to find anyone on Facebook.

That’s all. You have got five easy methods for finding someone on Facebook without logging in.

Wrapping Up

I have given you five methods. I hope each of them is very easy for you to get done.

If you like to go with Facebook’s tools for this purpose, you have to log in. But all of the basic details can be seen as a guest.

All of the services I have given here use Facebook’s API. So, you can see only that info that is set public.

I think everything is clear now. If you still have any doubt, feel free to ask via the comment form down below.

Also, share this post with your peeps on social media.

Continue Reading

Tech

How to Speed Up Windows 7 Performance

Published

on

No matter how fast your new computers might be, they all seem to get slower over time. Because there is a new kind of excitement to play with a new computer and to install lots of software on it.

The first program which we install on our new computers is anti-spyware and antivirus tools, to stay from viruses. I know, it's an essential program but what we actually do, we install more than one antivirus program.

Next, we download lots of unrecognized junk software from the internet. Obviously, your new computers gradually decrease the performance and one day when you are trying to open a program or file then it takes more time to open up.

So, Whatever the cause, there are lots of ways to speed up Windows 7 performance and make your PC work better without upgrading your hardware. Here are something that will help you in installing Windows 7 custom themes.

Tips to Speed Up Windows 7 Performance

Turn Transparency Off

The glass transparency uses more resources of a PC from the Aero feature, you can disable by following simple steps.

Step 1: Go to personalize. (Right Click on desktop > Personalize)

How-to-Speed-Up-Windows-7-Performance

Step 2: Click on the Window Color icon at the bottom of window.

How-to-Speed-Up-Windows-7-Performance

Step 3: Uncheck the box to disable transparency.

How-to-Speed-Up-Windows-7-Performance

Step 4: Click on save changes.

This will save some resources from being utilized and Speed Up Windows 7 Performance.

Turn on only required Visual Effects

You have to turn on only those visual effects that are essential and required by you. You can optimize how menus and windows appear by following simple steps.

Step 1: Open My Computer > Click on System Properties >Click on Advanced system settings (left hand side).

How-to-Speed-Up-Windows-7-Performance

Step 2: A small window will open up and from there go to the advanced tab and click on settings (performance).

How-to-Speed-Up-Windows-7-Performance

Step 3: Now here you can go for any of one option.

Option 1: Click on checkboxes as shown in the image below.

How-to-Speed-Up-Windows-7-Performance

Option 2: Select (dot) “Let Windows choose what's best for my computer

How-to-Speed-Up-Windows-7-Performance

Step 4: Click on Apply.

Enable Writing Cache for Storage Devices

This option will tweak your storage devices such as internal disks or removal drive to give the highest possible performance, to enable just you need to follow the below simple steps.

Step 1: Open Device Manager (Right Click on icon My Computer > Click on Manage)

Step 2: In Device Manager, click on disk drives to expand the attached drives to your computer. Here I have two drives, one is the internal hard disk and second is pendrive.

How-to-Speed-Up-Windows-7-Performance

Step 3: Firstly, double-click on internal hard disk > Click on Policies tab > Check Enable writing cache on the device > Click Ok

How-to-Speed-Up-Windows-7-Performance

Step 4: Now, click on another drive (pendrive) > Click on Policies tab > Select (dot) Better Performance > Click Ok

How-to-Speed-Up-Windows-7-Performance

This will surely optimize the usage of cache memory and Speed Up Windows 7 Performance.

Turn off unnecessary Windows Features

Windows 7 comes with lots of features and we all know that we are not using all the features of it so it also allows us to turn on or off Windows features as per our requirement. That will also speed up the startup process for windows 7. For that,  just follow the below simple steps.

Step 1: Open the Start Menu, type Windows Features in the search box, and press Enter.

How-to-Speed-Up-Windows-7-Performance

Step 2: Open up “Turn Windows Features On or Off” icon. In that, if you want to turn on any features then tick the check box otherwise untick the check box to disable the features.

How-to-Speed-Up-Windows-7-Performance

Step 3: After turning on or off, you will have to restart your PC. That's it.

Helps in reducing unnecessary usage of CPU and Speed Up Windows 7 Performance.

Disable GUI Boot

Disabling GUI boot literally reduces the startup time of Windows 7. Follow the simple steps to Increase Startup Speed Windows 7.

Step 1: Open Command Prompt (Win Key + R) > type “msconfig” > Enter.

Step 2: Click on the boot tab > Select your OS (Ex: I nave Windows 7). Then, below you will see many options from that check the box of “No GUI boot” and “Make all boot settings permanent” > Click Ok. I will ask for confirmation click yes and restart.

How-to-Speed-Up-Windows-7-Performance

So, all these are the important tips to Speed Up Windows 7 Performance. If you have any problem or query regarding this then you can surely put your comments below and we will connect with you as soon as possible! Happy Tweaking 😀

Continue Reading

Computers

How to Use the Undo and Redo Commands?

Published

on

I cannot even recount that how many times the undo and redo shortcuts have saved my life. These are one hell of a gem and have been a life savior, at least for me. Since you have landed here then you might be interested to know how to use the undo and redo commands, right.

So, this article will tell you how to use the undo and redo commands along with step by step guide.

So, without wasting any time further, let's dive deep into this and explore. So, let's get started:

How to undo and redo?

Okay, you want to take a step back or two, you can easily do that using an undo command. But the key point to take a note is that this is entirely controlled by the software on which you are trying to apply the undo commands.

Some of them allow multiple undo's while some of them allow a single one. For example, MS paint allows a single undo while in Adobe Illustrator you can perform multiple undo operations.

So, in this section,  we will see how to undo and redo in some of the major softwares.

We will first go to MS office. How to undo and redo in MS office? So, let's get started:

Step #1: First of all, you are required to open MS Word on your system. We are taking MS Word for illustration purposes; you can go with any of its products. Once you have opened MS Word, then you now need to move on to the next steps for further proceedings.

Step #2: Perform any action to an existing Word document or a blank document. After that, if you wish to undo your operation then press “CTRL + z.” This will revert your changes.

Additionally, if you want to redo an action then you are required to press “CTRL + y.” This way you can quickly perform the redo operation in Word.

Alternatively, in previous versions of MS Office, you may find the edit option from which you can also perform the same task by clicking on the undo and redo options.

Let's see how it can be done in MS paint.

Step #1: First of all, you will have to launch MS Paint on your system. Once you have done that, open the desired image file, or you can even create something of your own.

Step #2: Oh, you made a mistake and wanted to undo the action. Press “CTRL + Z” to get back a step back. If you want the redo the step then just press “CTRL + Y” to get the needful results.

Moving on, we will see how to redo and undo in Adobe Photoshop. So, let's get started:

Step #1: Open Adobe Photoshop on your system. Once launched, you are now required to open any existing project on which you want to perform these actions.

Step #2: Now, if you want to undo or redo your steps, you have two options, either you can go with the usual “CTRL + Z” keyboard shortcut which will get you exactly one step back, or you can go to edit option and then select the appropriate option from there.

Alternatively, to undo your steps, you can also go to the history section of Photoshop from where you can also see what steps you have gone through till now.

To go to history, you need to click on the Window option from the top navigation menu and locate the history option.

Once found, you need to click on it. This may open a history panel from the right side from where you have a look at your steps.

Now, if you wish you can select the desired steps that you want to undo and then delete them by clicking on the dustbin like icon as shown.

This will produce the same output as the undo command, but the difference is that you can revert as many steps as available.

To say the least, CTRL + Z and CTRL + Y are the undo and redo global actions for any Windows program. So, what if we want to perform the redo and undo operations on a Mac? If you are thinking about the same, then the following section is a must visit for you.

In Mac operating system, the alternative for CTRL + Z is “Command + Z” and for the redo operation the alternative is “Command + Shift + Z.” The Command key in Mac is equivalent to the CTRL command in Windows.

Also take a note that not every action your perform can be redone and undone. So, if these keys don't work in some cases, then you might have performed those actions.

[Additional Information]: Some useful keyboard shortcuts.

  • CTRL + SHIFT+ESC: Opens Windows Task Manager
  • ALT + TAB: Switch to another running program
  • ALT + SPACE: Displays the foreground window's system menu.
  • ALT + F4: Closes the current window
  • SHIFT+DELETE: Delete item permanently without placing it into the recycle bin
  • Windows Logo + L: Lock the computer
  • Windows Logo + R: Open the Run dialog box
  • CTRL + F: Finds for terms in a Window
  • Windows Logo + M: Minimizes all open Windows
  • Shift + Windows Logo + M: Undo the Minimize all (opposite of Windows Logo + M)
  • Windows Logo + D: Display desktop by minimizing all open Windows
  • Windows Logo + TAB: Cycles through running programs (Function similar to Alt + Tab)
  • CTRL + ALT + DEL: Referred to as “Three finger salute” often used to interrupt a function. It provides a bunch of options like task manager, log off and others.

So, this was all about how to undo/redo edits? We hope that this article must have added unique value to your knowledge base.

If this article has helped you in any manner, then do let us know through the comments section. If you have any suggestions or remarks, then those are also cordially welcomed. Also, do not forget to like us on our various social media channels.

Stay tuned for more of such articles.

Keep visiting for more. Thank you for passing by.

Continue Reading

Tips

How to Create Personalized Start Button for Windows 8?

Published

on

wINDOWS 8 START MENU

Its a quite a few months since the Windows 8 has launched. If you are among those people who love to have a Start button still in windows 8, then here we are providing you a classic tip “How to Create Personalized Start Button for Windows 8?” Yes you have certainly came across several apps, softwares and extensions. But this is a complete different new dimension. Protecting your computer is also crucial. See 3 best antiviruses for Windows 8 that will definitely going to protect your computer from harmful virus.

The CLSID

customise-WINDOWS-8-START-MENU

While you won’t have to go traipsing around the registry in order to implement this technique – I already did that – you may be curious as to where the CLSID came from. Essentially, a CLSID key is a part of the registry that contains code that provides access to specific system objects in the operating system, such as system folders. The CLSID keys can be found in two places in the Registry:

HKEY_LOCAL_MACHINESOFTWAREClassesCLSID and HKEY_CLASSES_ROOTCLSID.

Now, under normal circumstances, you would never need to use a CLSID because it is specifically designed to be used by developers and the operating system. In fact, a CLSID is a 128 bit Hexadecimal number enclosed in braces, so it’s not very user friendly.

In any case, the CLSID that provides access to the Apps screen is

{2559a1f8-21d7-11d4-bdaf-00c04f60b9f0}

The shortcut

To use the CLSID to launch the Apps screen, you’ll use the Shell command. In order to launch a Shell command from a shortcut, you need to use the explorer.exe command. As such, the shortcut to launch the Apps screen consists of the following command line. (Take note that there are three colons between the word shell and the left brace. Also keep in mind that there is only one space in the whole command line between the .exe file extension and the word shell.)

explorer.exe shell:::{2559a1f8-21d7-11d4-bdaf-00c04f60b9f0}

To create the shortcut, just open the Documents folder, right-click on the background, and choose the New | Shortcut command. When you see the first screen in the Create Shortcut wizard, type the shortcut in the text box.

When you see the second screen in the Create Shortcut wizard, type a short name for your shortcut.To complete the wizard, just click Finish. As soon as you see the shortcut icon, right click on it and select the Properties command.

When you see the Properties dialog box, click the Change Icon button to open the Change Icon dialog box. By default the Change Icon dialog box displays the icons from the explorer.exe file. As you can see, none of the available icons are very exciting. However, if you click the Browse button, you can search for other files that contain icons.

Once your custom Start button appears on the taskbar, drag it all the way to the left side of the taskbar. So here you are with what you want to have. So go on and enjoy “Windowing”!

Tired of entering passwords again and again. See how you can remove passwords from Windows 8 to log in to your computer without unnecessary passwords.

Continue Reading

OS

How to use BitLocker to Encrypt your Files

Published

on

How-to-use-BitLocker-to-Encrypt-your-Files

Locker means a safe place where you can put your personal or important things hiding from others. We all have some things which we don't want to share with others same as in the computer you have any important data that you want to hide from the outside world. For that, there are many software available over the web and as well as well-known by you so no need to describe it.

But if you want to lock your Hard Drive partitions without any software then? In that case, Microsoft has provided one wonderful tool known as “BitLocker” in Windows Vista, 7 and 8 for encrypting your entire Hard Drive partitions. Using BitLocker you can lock any volume on the computer even the one you boot from. But a question arises in your mind that How to use it, right? So, I will show you two different modes to use BitLocker on your computer. If you wanted to Defrag the Hard Drive, you should see that.

1. “How to use BitLocker on a normal/data volume”

2. “How to use BitLocker on Boot volume”

Let's see the first mode:

1. How to use BitLocker on a normal/data volume?

A simple way to enable BitLocker – right click on any volume and select “Turn BitLocker on” to start the locking process. After clicking a window will pop-up (as shown in the figure below) asking to enter a password to use with the drive – you will also ask to say a copy of the recovery key somewhere at safe place and then it will begin encrypting your drive.

How-to-use-BitLocker-to-Encrypt-your-Files

By this method you can lock all the drives on your computer except “C:/ drive” or “Boot partition”.

Now, the second mode:

2. How to use BitLocker on Boot volume

Yes, it is true that you can encrypt the main operating system drive, but this has some special requirements since the drive has to be unlocked before boot. First of all this requires that Windows has a seperate boot partition that isn't encrypted; in case if you don't have then create a separate boot partition. The second requirement is that your system include a TPM (Trusted Platform Module).

If you try to encrypt your boot volume without satisfying the above to requirement then it will give an error as shown in the figure below.

How-to-use-BitLocker-to-Encrypt-your-Files

So, in that case you will need to configure your system to use BitLocker with a TPM. Here is how you can do that.

  • Press [win + r] and type “gpedit.msc” in it and press enter to launch the Local Group Policy Editor

How-to-use-BitLocker-to-Encrypt-your-Files

  • Now, browse to – “Computer Configuration > Administrator Templates > Windows Components > BitLocker Frive Encryption > Operating System Drives
  • In the right panel. double click the setting “Require additional authentication at startup” and select “Enabled”
  • In that please check the below options that “Allow BitLocker without a compatible TPM…” is checked.

How-to-use-BitLocker-to-Encrypt-your-Files

  • Then, Click Ok – you are done.

Now you will able to start the BitLocker process on your system drive, and will have the option to either enter a password on startup or insert a USB drive to boot.

If you have any problem regarding “BitLocker” then put your comments below so that I can surely help you to get rid out of your problem. Hope this guide helped you to understand how to use BitLocker.

PC taking more startup time? Change the Startup program to boost the startup process in windows 7.

Continue Reading

Trending