How to Fix Headphones?

Affiliate disclosure: In full transparency – some of the links on our website are affiliate links, if you use them to make a purchase we will earn a commission at no additional cost for you (none whatsoever!).

You love to hear music while working and while exercising and for that you bought a nice, shiny new pair of iPhone 6 headphones. You are amazed by the sound quality and don’t feel tired telling your friends how good the bass is.

This happiness lasts for a few months and then the heartbreaking moment happens. You were listening to your favorite song when suddenly you hear a slight crackle, and the song goes mute. Your valued possession has just turned to a very inefficient paperweight and you are sulking that How to fix headphones not working.

This is a familiar episode that repeats with nine out of ten people. If you wish to know how to fix headphones then you need not waste money every time this episode repeats with you.

We all know that this happens because the cables almost invariably weaken and breakthrough constant movement. The majority of breaks occur just at the point where the cables leave the jack. It is the point of highest stress and thus you should learn how to fix headphone jack.

how to fix earbud

Some manufacturers do use durable cables and reinforce the places where the cables join the jack plug and the phones, but still, they break sooner or later. If you are ready to put in a little effort then you don’t need to throw your headphones into trash over the issue that headphones not working.

How to Fix Headphones not Working on iPhone

If you follow the below instructions wisely, you will be able to fix those headphones. Here’s how to fix broken headphones. So to answer your question “What can I do now that my headphones wont work?”, you will require a few things.

  • The broken earbud headphones that need to be fixed.
  • A replacement jack plug. Buy the replacement that matches the size of your original plug. One thing to note here is that the replacement jack plug will almost certainly be considerably larger than the moulded plug you’re replacing. It is because the tiny plugs fitted in factories are soldered and moulded on by machines.
  • A soldering iron and solder.
  • A vice to hold things safely while soldering.
  • A matchbox or better still will be a cigarette lighter.
  • A penknife, some scissors, or a wire cutter.

Once you have everything ready, follow the step-by-step guide on how to fix earphones.

how to fix earphones

Step 1: The very first thing that you need to do is to get rid of the old jack attached to the wire to reach to the root of the problem. Just cut one or two inches from the old jack. Now you want to strip about 2 inches of insulation from where the jack used to be.

Step 2: As you strip the wire, you will see 4 wires. Two of these will be ground and so they can be twisted together. The other 2 wires should be red and green. The earbud cables are wired up slightly differently in different cables.
You can have a red or green wire inside surrounded by ordinary, copper-colored wire or green or red cable surrounded by red and green “striped” wire. In this case, the stripped red and green is the ground wire, which was copper-colored in the other cable.

Step 3: Now strike a match and briefly heat the ends of all three wires to burn off the insulating covering. You can also use scissors or leatherman to scrape the insulation if you wish.

This step is important for making the proper electrical connection when you solder. Make sure not to burn too much as you just want to get rid of insulation; you definitely don’t want to make wires too black and brittle.

Step 4: Unscrew the case of your jack plug and you’ll find the three terminals for the three wires in your cable: red, green and the twisted ground ones. You need to now solder these wires to the jack, but before doing that there is a common mistake, which people make and then they have to redo it, which is frustrating.

So, before you further proceed on how to fix earbuds, thread the cable through the top (plastic) part of the plug, which is the cover.

Step 5: The time has come for tinning the wires. Tinning means you lightly cover the bare cables with solder so that they make better joints and better electrical contact.

For this, take your soldering iron and cover each wire in solder. If you see a nice, shiny coating you can bang on. This also allows us to slip each wire through the respective holes on the stereo plug easily.

how to fix headphone jack

Step 6: It is very important to make a good mechanical joint between the wires and the terminals. So, poke the wires through the holes and wrap them round a couple of times before you solder. Also, check the wiring before soldering.

Put the ear-buds into your music player and with the wires touching the contacts, see if you hear stereo. If the sound is coming then everything is fine and you just need to secure the connection by soldering them.

If you don’t hear the sound even after touching the wires firmly to the contacts then you need to check your connections again.

Step 7: Once sound starts coming, you can go ahead with the soldering part. The copper-colored ground wire goes to the large outer terminal. The green wire goes to the central terminal and the red goes to the remaining terminal.

Care should be taken not to touch the bottom of the jack plug while soldering as heat travels through the electrical pins quickly and it can burn your fingers. So, always use a vice to hold it.

Step 8: Once you are through with soldering, place all three soldered wires inside the clamp at the top of the plug and crimp it tight with some pliers. This ensures that the soldered connections are secure and don’t break when you pull on the cable.

Now you are ready to reap the benefits of all your hard work. So, sit back and listen to your favorite song using the earphones you just repaired.

Veronica

Veronica Uppal is a vibrant author, who loves to blog about the latest tech news, and viral content that usual trend on Twitter and social media platforms. She's hooked on to internet 24x7 for her editing articles onGizmoBase and keeps Tweeting and blogging about any interesting she comes across.

Leave a Comment