Many times, you would require disabling Windows update. The most prominent reason being that it takes up a hell lot of internet data while the system is connected to the internet. Just in case, if you are using Windows 10 then “How to disable Windows update in Windows 10?” becomes an obvious question.
So, in this article we will tell you how to turn off automatic updates?
So, without wasting any time further, let's get started with the process:
How to disable Windows update in Windows 10?
After going through this method, you will be able to know “How to stop Windows update? ”
Step #1: In this first step, you need to go to the control panel. For this, you can consider moving the following way. Just go to the search bar and type “Control Panel” without quotes. Once you get “Control Panel” program as the result, then all that you require doing is to click on it or hit enter. This will apparently open the control panel for you.
Once you have managed to do as stated above then, you can now move on to the next steps.
Step #2: Now, from the control panel window, you need to locate “Administrative Tools”. Once you have located the same, then you now need to click on it. This will open a new window for you.
Step #3: From the “Administrative Tools” window, you need to navigate to the “Services” option. Once you have found the same then, you need to open it by clicking on it. This will open a new window for you.
Step #4: Now, from the new window which you have got as the result of the previous step, you need to scroll down a bit for the “Windows Update” option. Once you have found it, then you need to click on it. This action of yours will open a new window pop up.
On the Window pop up, you are required to look out for “Startup type” section. Once you have reached there, you now need to click on the “field” just adjacent to it. This action of yours will result in a drop-down menu from which you are required to select the last option which is “Disabled”.
Now, you are just one step away from completing the process.
Step #5: Now, all that you require is to click on Apply and then OK.
This way you can easily disable Windows update in Windows 10.
If we fast forward the steps then it will go like:
open run (Windows + R) -> Type “Services.msc” without quotes and hit enter -> From the subsequent list, launch Windows Update Service -> First go to “Startup Type” and then navigate to “General Type” -> Select Disabled as the option -> Click OK.
It is an indirect method to disable Windows update in Windows 10. For this, we will use the network.
Step #1: In this very first step of this method, you are required to connect to your internet network or Wi-Fi. Done that, move on to the next steps for further proceedings.
Step #2: Now, you need to navigate to the “All Settings” option. You can find the “All Settings” option just below your network connections. Once you have found the “All Settings” option, you now need to click on it in order to open it.
Step #3: From the window which you have got due to the recent activity of yours in the previous step, you now need to locate “Network & the Internet”. Clicking on it will open another window for you.
On the left side of the window precisely called the left pane, you are required to select “Wi-Fi” as the option.
Step #4: Now, you need to select “Advanced Options” from the window. This will result in a window from which you are required to navigate to the Metered connection section. After this, you need to switch it on where the following is written: “Set as metered connection.” This will turn it on, and windows updates won’t run in the background.
Here is a quick recap of what we have done so far in this method:
Launch the Settings application (consider using Windows + I for this) -> Go to the “Internet and Network” section and open it -> Wi-Fi and then click on “Advanced Options” -> Switch the “Set as metered connection” to on.
This method is also an indirect method. In this method, we will not directly disable the windows update. Instead of it, Windows system will notify us about the available updates and we will have the power to choose whether to install it or not.
So, let's show you how we can do this:
Step #1: As the very first step of this method, you are required to open the run application. For this, consider using “Windows + R” and then type “gpedit.msc” and then hit enter. This will open the “Local Group Policy Editor” for you.
Step #2: Now, you are required to navigate the following way: Firstly, go to the Computer Configuration -> After this, click on the Administrative Templates -> Windows components -> and finally, go to the “Windows Update”.
Step #3: Once you have clicked on the “Windows Update” option then now you are required to click on “Configure Automatic Updates“. This will open a window for you.
Step #4: First click on the “Enabled” checkbox if it is not configured. Now, you are required to navigate to the “Options” section and then select configure automatic updating to “2- Notify for download and notify for install”
Step #5: Now, click on “Apply” and then OK.
So, this was all about “How to disable Windows update in Windows 10?“. We hope that after going through this article you will be able to Turn off automatic updates in Windows 10.
If you liked this article then do not forget to share it among your peers.
How to stop automatic updates? If you are aware of any other methods then do let us know through the comments section below. Your addition is highly appreciated.
Thank you for crossing by and giving it a read.
Stay tuned and keep visiting for more of such articles on Windows.
How to Sync PS3 Controller
Being launched back in 2006, Sony’s Play Station has made a huge leap in the gaming industry. With a range of wide variety of games, it is an addition to any fun-loving person no matter where his/ her taste lies.
A Play Station unit consists of the console and a controller. Plus, you will get a USB cable to connect both the devices together. Today, I am going to share how to sync the PS3 controller.
So, let’s get started without blabbering much.
How to Sync PS3 Controller?
Syncing the PS3 controller with the PS box is not a painful task. It can be done within seconds by one or two button presses. But connecting the same to a computer is a complex task that needs a few drivers to get started.
I have divided this article into two parts; the first one deals with regular syncing while the second one walks you through the process of syncing a PS3 controller with your PC.
How to Connect a PS3 Controller
You won’t need any extra software or driver here. The PS3 box (console), controller and the USB cable are the requirements.
Follow the steps given below to sync or connect a PS3 controller.
Step 1: Connect your PS3 controller to the game console via the USB cable comes in the product package.
The charging process will be started as soon as you connect the controller to the console. And, you can see three LEDs blinking in red colour at the top of the controller.
Step 2: Now, you need to turn the controller on. In order to do it, you should press that big PS button placed at the centre of the controller.
You will notice that the blinking has been disappeared, and only one LED is on now, which mean your controller just synced up with the console.
If your controller has Bluetooth facility and you want to get rid of uncomfortable wires, you can move on to next step.
Step 3: To connect the controller to the console, you have to follow the two steps I gave above. And after that, just disconnect the controller by unplugging the USB cable.
There will be no noticeable changes if your controller has a seamless Bluetooth feature. You can play with it even after removing the USB cable from the connection establishes wirelessly via Bluetooth.
You now know how to connect PS3 controller, don’t you?
How to Connect a PS3 Controller to a PC
You just got to know the ordinary syncing process of a PS3 controller. It will be good if we get the same controller to play games on the PC, right? What if I tell you it is possible?
Yes, you can use PS3 controller on PC, but only after carrying out a set of actions.
Read on further to know how to connect the PS3 controller to PC.
Step 1: Connect your controller to the PC using the USB cable. Have you lost the official USB cable? Don’t worry! You can always pick one for $2 from e-commerce stores. Any USB A to Mini USB will serve the purpose.
Windows will install some initial browsers as soon as you plug it into the PC.
Step 2: Now, the adequate drivers are what we need in order to make the controller functional. Plenty of PS3 drivers are available for PC. But here I am going to talk about MotionJoy.
Visit the MotionJoy download page and download the latest version of the driver.
Step 3: Open the zipped file you just downloaded. Don’t run anything within the archive. Instead, make a new folder in any location and extract all the items to it.
Step 4: Whenever the extraction finishes, open the program called “MotioninJoy_071001_signed.” From the program interface, choose Driver Manager tab and select the controller from the Hardware Location area.
Click Load Driver button to download the necessary drivers. Windows may prompt you with an unsigned driver notice, but there’s no harm in going on with the installation.
Step 5: The next step is the configuration of the drivers we just installed.
Better DS3 is a good option to do this. Visit Better DS3 website and download the tool.
Step 6: Again you will get a zipped file. Extract all the items to the folder we created for MotionJoy and run the program named BetterDS3_1.5.3 or similar.
Step 7: This is the crucial step in the entire process of connecting a PS3 controller to your PC. Here, we are going to create a profile using Better DS3.
You will get a window similar to the image, given below.
Then, connect the PS3 controller to your PC. You will see the device name under Connected DS3 Controllers. If you have got a wireless controller, make sure that you connect the controller end (mini USB) before the PC end (USB type A).
You can enable Bluetooth Pairing here if you want to go wireless.
Click the drop-down menu, New and choose XInput from the given options. It’s the best choice to go with a PC game controller.
You will see a new window with several options responsible for customizing your PS3 controller.
Then, click that grey Xbox 360 button and it will show you the mapped controller button. You can customize every single option there including buttons, vibrations, etc.
Once set, click Save Profile.
That’s all. Now, you can use your PS3 controller on your PC without any worries.
The wireless connection is the same except that one option we select, which says Bluetooth Pairing.
Are you getting a PS3 error? Check this post to solve PS3 DNS error 80710102 on solve PS3 DNS error 80710102 on PlayStation network.
I hope you have got some valuable info to bag from here. Officially, Windows does not allow us to use a PS3 controller on the computer (that’s not the case of Xbox 360 though). That’s why we need this much steps in the process.
Don’t you know how to sync PS3 controller now? If you have any queries regarding this tutorial, feel free to share the same with us using the comment form down below.
Inspire us to produce useful content like this by a single click on the social media buttons given here. Spread the info, help the fellow.
How to Record Video on Mac?
Being one of the most versatile OS on the planet, the users are the only elite class. And the need is also at that level. After a series of Mac’s introspection and data collection, developers often stumble across a common query, How to record video on Mac?
This is one of the most frequent queries on blogs and forums. But after a release of a lot of supporting materials, many users are still not clear about their question, “how to screen capture on Mac” or “what is the process to activate screen recorder for Mac”?
The built-in QuickTime app is one of the best ways that can solve the issue of a screen capture. Mac has been one of the prominent players in the digital world and one of the most robust and flexible systems.
It has made several apps to be friendly enough to solve the issue of how to record screen on Mac?
The only thing that you need to do is go to the application folder and launch the QuickTime app. Then move to file and click on Screen Recording’s record button and now you may choose whether to record a certain portion of the screen or the total display.
This is one of the best tools that you may use as a screen recorder for Mac. Not only this, but it will also help you to record video on Mac. There are numerous software applications available on the internet that can help you record videos.
One of them is Movavi’s recording application, which allows you to make the recording seamlessly for your screen. All you need to do is set some convenient options about the video with few clicks and start the recording.
After that, you may save the file in popular video formats in your system. It is one of the most powerful desktop recorders, and many of its updates also work with light applications that will solve the common query “How to record audio on Mac?”
Here are the complete Steps How to Record Video on Mac
The recording is one of the most basic pre-requisites of any project. There may be many a time when you feel the need for recording any activity from your screen on MAC.
And the internet is loaded with numerous such applications, thus making how to record audio on Mac a meagre issue these days.
But the application varies in terms of QuickTime Player and any Video Converter to record the stuff on MAC OS.
Recording Video on Quick Time Player
As discussed earlier, the most effective tool is QuickTime Player, and Apple has added it to the basic feature catalogues in Snow Leopard version.
Now, let us see the steps in detail.
Launch QuickTime player. Go to file and then go to New Screen Recording.
Now a screen recording window will open and after that, you can complete recording the screen. You can click on the same triangular button on the right side of the screen.
Now click on the red button, to begin with, the recording. Here, you will get a pop-up with options: whether to record the total screen or some portion of your screen.
Once the needed recording is done, you may click on the ‘stop’ button to finish screen recording and finally, you can easily download the video and save it on your system.
Another process of doing it is by using any video converter like ultimate. This is another application that has changed the face of how to record a video on a Mac. Now, let us see the steps in detail.
You may open the video recording application on Mac and select the “record screen” option on the panel to select the record mode.
Now you have to set the capture parameters present on the right side of the application window.
Now hit on the start recording option, to begin with, the recording.
To stop recording, there are 3 ways- you may simply hit on the stop button in the record screen.
Now, click on the stop button in the list of task pending record or you may use the shortcut -“Shift+ Command+ 1”.This versatile video recorder application can very easily record files in other formats such as 3G2, FLV, SWF, MP4, AVI, 3GP, WMV, MPG, MP3, WMA on Mac.
Now last but not the least let us take a tour of another process that can make the task even easier in Mac. It is Camtasia Mac – a recording tool developed by TechSmith company.
It is not only a video recording application but also offers a wide array of options for video editing. It is not only a simple video recorder but also one of the best applications for customizing and editing your recordings.
It is one of the most professional tools for Mac and one of the best among the three tools discussed in the article.
The cost is quite high at about 100 US dollars, but the purchase is really a value for money deal.
Once you load Camtasia in Mac 2, you will find an entire window for settings.
Now, you will see the entire preset portion of the video recording screen. Click on the red button on the right view and the preset.
Now, you start off with the recording process by hitting on the “Rec” button.
Now that you know three easy ways to record video on Mac go ahead and record as per your needs on your favourite Apple operating system. The step-by-step guides will direct you on how to go through the process.
Stay tuned on this site to get regular updates about various guides to using different operating systems and gadgets like how to record video on Mac. The tips are sure to help you with simplifying the processes.
If you have any doubt about this video recording guide for Mac, drop your queries in the comments section below, and we will get back to you with appropriate solutions.
How to Get Rid of Virus on Mac
Mac harps about being the best in the world, yes it is to an extent but not the perfect. Like the other operating systems, Mac also is attacked by virus quite a few times.
Mac always advertised its safety, yes it was but the increase in the number of Apple users gives birth to those creates viruses and malicious software.
In the last articles, I have discussed a few Mac applications and how to use them efficiently. In this article, I will briefly discuss How to Get Rid of the virus on Mac, also throw some light on the best antivirus for Mac.
You might have faced problems on learning the processes of performing a Mac Virus scan, the process for Mac virus removal is quite simple and by the time you finish reading these article, you will learn how to do the Mac virus scan and how to get rid of a virus through the same.
How to Get Rid of Virus on Mac – Basic info on removing Virus
The most commonly known Mac virus is Flashback Trojan, a simple and easiest piece of Mac malware developed to phish personal data using the plugins.
The developers of this malware targeted a huge number of Mac devices and made the process of unknowingly simple as a result of which over 8,00,000 Mac machines are infected today.
So what you must now be worried about what Flashback Trojan does. A lot of Mac users have mistaken Flashback to be trusted browser plugin and installed it to their Mac devices.
So what happens after this? Is it really so malicious? What amount of damage does it do to your system? These are a few common questions which strike your mind when you think about a virus.
So what this Trojan does is it starts installing the code which is specially designed to gather all your personal information on the Mac device ( for ex: entering into all the applications installed on your Mac device like Skype etc.
It also starts gathering the information of all your personal credentials you have used like email Id and the passwords, your bank details, etc.) and sends it to a remote server. It is so strong that it does not need any human activity to be performed to install the codes.
Well, this does not do much harm to your Mac device but definitely does a lot of damage to you if you have your personal data stored on your computer.
So that defines how malicious it is to you. Flashback first appeared in the September 2011. A lot of users then wanted to learn how to remove virus from Mac.
After the release of the Flashback, Trojan Apple released its own malware security tool named X to protect to overcome the problem and help users protect loads of personal information.
Ever since Apple released X protect there have been 3 updates to avoid the malicious damage caused by Flashback.
Now let me take you through how you can detect and perform the activity of Mac virus removal. Search for F-secure which is a tool developed by a private security firm and follow the instructions prompted automatically by the system. Symantec also has its own tool to get rid of Flashback.
In the meantime, you can also perform the function of running the trio commands in your Mac terminal, you will find the terminal in the Application folder of your Mac. Has it taken long for you to find the terminal? Then perform a spotlight search for the terminal.
Once you are there you will have to copy and paste one code string at a time and then it happens automatically.
defaults read / Applications / Safari.app / Contents/ Info LSEnvironment
defaults read / Applications / Firefox.app / Contents/ Info LSEnvironment
defaults read ~/ .MacOSX/environment DYLD_INSERT_LIBRARIES
If your Mac device is not infected the system will give you a result domain/default pairs “does not exist.” If it is not then the patch is split up for the location of where the malware was installed on your Mac device
How can you perform the Mac virus removal for free
The normal perception of any user is that why should I be paying for smoothing I have not done or something which could never be a need to me. So hence, it is very important for you to know how you can get rid of the virus on for free on your Mac device.
You will also have to avoid sharing your credit card details to those fake websites online who claim to give you a Mac anti-virus.
There is absolutely no need for you to pay for any malware or Mac anti-virus software. There are a lot of trusted providers of antivirus who give away the services for free if you are using your Mac for personal use and charge those who are using it for business purpose.
Are you wondering what you would have to do when the website prompts that malicious software is detected on your Mac?
Also, when you are scouting for things online or browsing through a few websites what if these sites say that all the viruses are deleted without performing any activity, what would you do? You will have to follow these simple steps to overcome the same.
- If you are using the Safari browser (or any another web browser) and you end up getting a message out a warning about malicious software, virus, or some random problems detected, You will have to quit Safari by choosing Safari > Quit.
If the browser does not close after performing the quit function, you will have to force-quit the browser. To force quit the app you have to hold control-click on Safari and choose the force quit option
- You will now have to go to the downloads folder and pull out all those files which you feel you have not downloaded and put them into the trash
By doing this, you will overcome the problem of deleting the malicious software on your Mac.
I hope this article has helped you understand the most heard name in the Mac virus and how to overcome the same and how you can also delete the malicious software and how to get rid of viruses on Mac for free.
In the next article, I will discuss a few more Mac viruses and how you counterattack on them.
How to Install a Printer for Your Computer?
Installing a computer printer, basically, involves two steps. One, installing the software which allows your computer to communicate with the printer and the other one is establishing the connection.
The connection between a printer and the computer can be made via two mediums. One parallel and the other way is via using a USB cable. Most of the printers used in recent time mainly support USB.
If you have an old system, then you will have to use the parallel connections. Since this is the only options provided on old computers.
In today's article, we will let you know the complete step by step guide on how to install a printer for your computer,
So, let's not waste much time and get started with the guide How to install a printer for a computer.
How to Install a Printer For Your Computer
The guide on how to install a printer contains all the steps that will help you to learn to install the printer. In this guide, we have provided almost all the steps with the screenshot.
But before following the steps, make sure all the cables are properly connected on both ends i.e., the computer and the printer. If it is so, move to the steps given below. And if the cables are not connected, then before following further steps, make sure you do connect them.
In the guide on how to install a printer on Windows, I will let you know all possible ways to install a printer on your computer. First, we will begin with the Printer Wizard. The steps are given below.
Step 1: first of all click on the start button displaying on the taskbar and go to the control panel.
Step 2: In the control panel, pick the category Printers and Other Hardware. Check out the below screenshot I have mentioned.
Step 3: As sooner you click on the Printers and Other Hardware option a new window will pop up. Here you will have to click on the Add a Printer option.
Step 4: When you click on the add a printer option, an Add Printer wizard will pop up. Click the Next button to enter the Local Printer wizard.
Step 5: In the next window, you will be provided with some options. There would be two radio buttons; you have to select the first option that is Local Printer attached to this computer.
Also, make sure the checkbox beneath this radio button i.e., Automatically Detect and Install my Plug and Play Printer is selected. If it is not, click on it. Once done, click Next.
Step 6: In the next step, you will see a New Printer Detection dialogue box along with the message Windows is searching for the new plug and play printers to install.
If the wizard is unable to detect your printer in the New Printer Detection dialogue box, click Next to install the printer manually.
Step 7: When you click on the Next button, you will see a dialogue box I have mentioned below.
In the Use the Following Port drop-down menu, select the port for the printer to use. Once done, click Next.
LPT1 is recommended. But you can choose any if you want.
Step 8: In the next window, you will have to select the manufacturer and the model of the printer from the Manufacturers and Printers section. Once done click on Next.
And if you have Software Disk for the printer, then you will have to select the option Have Disk and insert the disk into your floppy or CD-ROM drive.
Step 9: After you click on the Next button, you will be asked to enter the name of the printer. You will see a dialogue box, similar to the image I have mentioned below.
In the image above, as you can see the name of the printer is highlighted. If you want to edit it or change it, simply remove the previous one and type the name you want. And try to keep the name as short as possible.
And if you want to keep the printer as default, then leave the Yes radio button selected just below the name.
Once done, click Next.
Step 10: As sooner you click on Next, you will see a new printer sharing dialogue box. If you want to share your printer with other users, then select the radio button, Share name.
This is the name which appears in front of anyone when they select this printer for printing their documents. If you don't want to share the printer, keep the radio button Do not share this printer selected and click Next.
Step 11: As sooner you click on the next button, you are done. You will see a dialogue box, the Print Test Page. If you want to print a test page from the newly installed printer, keep the radio button selected as yes. And click on Next.
And if you don't want to print a test page, select the radio button No, and then Next.
As sooner you click the Next button, you will see a completion wizard saying, completing the Add Printer Wizard. Simply click Finish.
And you are done!!
This is how to install a printer for your computer. This was the most useful way to install the printer. Another way to install a printer is by using the CD drive.
For this, you will have to establish all the connection as mentioned above and then Insert the CD that came with the printer.
If the CD doesn't start automatically, you will have to go to My computer and open the CD drive. Once done, open the setup.
In case, the CD is not working, or you are facing any issues with the above method I mentioned, you can download drivers as well and install them to the computer.
And you will be able to install the printer on your computer.
These were the three ways to install a printer. I hope you found the guide useful. In the case of any confusion, you can drop the comment below.
And if you enjoyed reading the guide, have a look at the other tutorial by clicking here. You may find it useful too!
How to Get the Google Chrome Standalone Installer
If you are reading this article, you must be on some sort of Internet Browser. Go ahead, tell me what browser is it?
Chances are it is Google Chrome!
Chrome is hands down the most preferred browser right now and with good reason too. The only hindrance to it is that you will have to download it off the internet every time you use a fresh installation of your desktop OS.
Well, not anymore! We have for you the chrome standalone installer!
But, before we get to that, let us find out why we are listing Chrome as the first choice browser and not any other browser.
Why Chrome of All Browsers?
Well, the answer is relatively simple. Chrome is the best browser around.
“But on what grounds?”, you ask.
On several, actually. Chrome has been found to be the fastest and most stable browser around.
Competitors Firefox and Microsoft with their new Edge browser seem to be catching up, but Chrome is yet to give up its crown. Opera had a salient feature with data connectivity, but even that has been remedied with a chrome plug-in.
Another feature that Chrome offers is syncing tabs and histories and passwords between the mobile and desktop counterparts and this is one feature that no one yet has been able to implement so perfectly!
Why the Chrome Standalone Installer?
You all must be wondering, what is the use of having a google chrome offline download because it's an internet browser! It won't function without the internet!
Well, let me give you three scenarios where you'd have to download chrome offline!
- If due to work or some other reason you have to install the browser on many machines simultaneously, then the chrome standalone installer comes in incredibly handy!
- If you're on a very slow internet connection, then downloading Chrome every time you start from a fresh install of your OS can be tiresome! The google chrome offline download the app will save you some precious time!
- If you're on a metered connection then installing Chrome via online methods will blow a part of your data cap away! Download chrome offline for such situations.
How to use the Chrome Standalone Installer
There are two main environments where Chrome runs. Windows and Linux. We will discuss how to use the Chrome Standalone Installer in both of these.
As an extra, a valid and up to date link to the Android apk for Chrome will also be provided should one want it available on their Android devices!
#1. Offline Installer for Windows
Windows come loaded by default with Intenet Explorer. However, most of us substitute it with Chrome right off the bat!
For the installation procedure to be completely offline we will need to follow the steps as listed below.
The first order of business is to check the architecture of the system we are running. We have to find out if we are running the 32 or 64-bit architecture of Windows.
This can be done with relative ease by right-clicking on the Computer icon> Properties.
We also have a choice of the operating system here, 32 or 64 bit and based on what we found in Step 1 we install the version of Windows relevant to us.
64-bit users of Windows offline will find it at this link.
The installer is saved on a thumb drive and is ready to be utilized on any Windows-based PC.
#2. Offline Installer for Linux
Now things can get a wee bit more tricky for Linux users out there. There are 4 main versions available!
Figure out if you're running the 32 or 64-bit version of your OS just like before and if you're using Ubuntu or Fedora. Unfortunately, these are the only two Linux distros officially supported by Google.
If you have any other distro you may check out community builds in the link here.
Now head on over to this link and choose the version you want to download!
And like before, put in a safe storage media for future offline installations!
#3. Offline Installer for Android
And now for the bonus round! Chrome is generally bundled with Android as part of the Google Apps package.
However, a situation with which Custom ROM flashers must be very familiar with is flashing a micro version of Gapps that doesn't contain Google Chrome!
For those times you have to download chrome offline!
Here is the link to apk mirror for the latest apk of Chrome on Android.
And that brings us to the end of this article! If you are considering to upgrade to Windows 10, you might want to check out this article first!
Be sure to leave your comments down below and I'll get back to you with the solutions to any questions you might have!
How to apply at Technorati Media Ads
How to Sync PS3 Controller
How to Invert Colors On iPhone?
How to Make a Yahoo Account Without a Phone Number?
How to Receive Money through PayPal?
How to Install GIMP for Mac
Tech1 year ago
How to Make a Yahoo Account Without a Phone Number?
Tech1 year ago
How to Receive Money through PayPal?
Mac1 year ago
How to Install GIMP for Mac
Mac1 year ago
How to Use Apple Thunderbolt Display with PC?
Entertainment5 months ago
How to Watch Game of Thrones Online?
Tech5 months ago
How To Block Sites on Chrome?
Tutorials1 year ago
How To Enable/Disable Chrome Pop Up Blocker
Tech1 year ago
How to Turn on Bluetooth in Windows 10