How to check where a DNS Record is pointing to? If that’s what you’re looking for, you’re at the perfect place because as the title might have suggested to you, that’s what this article is about.
It not 2001 anymore where these details used to come under “expert’s arena”, and short forms like DNS automatically made a simple computer guy sound like he owns couple PHds in computer science.
Infact I’ve broken down almost everything that there is to DNS records in the following sections.
So okay before getting into the process of How to find out where a DNS record is pointing to, let me clear some basics for you.
What is DNS?
A DNS is the abbreviation for Domain Name Servers. In simpler English, take them to be the contact list, or phonebook of the internet. Just like in a phonebook directory you get numbers and the names of the people corresponding to them, similarly a DNS recrod consists of websites and their “IP Addresses”.
For eg. www.howdiary.com doesn’t exist for browsers and ISPs, they don’t know this site with that name, instead this website will look something like 18.104.22.168 to them, and this is the record, the connection that DNS records maintain.
Now that was the simple explanation of it, if you want a deeper look, then let me tell you a DNS record isn’t as simple as it sounds. It’s made up of quite a number of complex elements, which I’ll explain to you in case you really need to understand the functioning of what you’re dealing with.
NameServers:- I’m sure everyone on this page is aware of nameservers, well you got a domain and that domain is registered with a company, right? So the nameservers just point out the company where your server DNS is registered.
A real life scenario would be, if you register a domain name from Godaddy, and you’ve got your servers with Bluehost. In that case you’d need to point your nameservers for your domain at godaddy to your nameservers from Bluehost. It acts as the connecting link between the two.
CName:- CNames are alike nameservers, but different. They point your subdomain to the server, but they use “names” instead of numbers (IP addresses).
Infact, CNames can’t use IP Addresses even if they wanted to, instead they point to server names directly, like howdiary.com would be pointing to server1.bluehost.com (if it was hosted on Bluehost and it was the CName for Bluehost).
Zone Files:- There must be some place where your DNS records are stored, right? Think of it as the personal cabinet of your domain company where your records are stored, that’s what Zone files are.
So Zone files are the storage spaces of your data, something like the tables and columns you get in the MySQL databases.
A Records:- These are what take care of your primary and subdomains. They help you point your subdomains to specific IP Addresses so that your websites are accessible. They’re almost alike CNames but the big difference is they use IP Addresses and not website names.
MX Records:- Your domain must have Emails, right? It’s optional to use them or not, but if you do, it’s the MX Records’ responsibility to point them to your domain’s email provider.
So those are the actual elements the DNS record comprises of, it’s more like a collection of Nameservers, ZoneFiles, MX Records and everything else on the list above.
How to Check Where a DNS Record is Pointing to?
It’s pretty simple actually, and you don’t need almost any amount of internet expertise so as to say in order to know How do I check where a DNS Record is pointing to?,
The simplest method to do so is head over to IntoDns.
Once you’re there just enter the URL you want to check the DNS record for.
And in the next couple seconds, you’d get the details you’re looking for. Infact IntoDNS holds a lot more information than just the DNS records, it will get you detailed MX records, SOA records, and almost every kind of record associated with the domain.
Method #2 to Check Where a DNS Record is Pointing to:-
The second method is to use ViewDNSInfo.
It’s a tool similar to IntoDNS. You enter your domain in the “DNS Report box”.
And you get the whole of the report listed down for you in simple English.
Method #3 to Check Where a DNS Record is Pointing to:-
I know the above tools do their job well, but hey it’s no harm listing more options, right?
So the other tool which lets you check DNS records is MX Tool Box. Just head over there and enter your URL.
And you’d get the details in around 2-3seconds.
Well being honest, it’s not as elaborate or detailed as the other two tools I’ve mentioned, but it does the job, right?
So that was all I had on How to check where a DNS Record is pointing to? Hope this piece helped? I’m sure I’ve listed enough options for you to run out of them.
Although if you’re facing trouble or would like me to help you out with something, just make use of the commentbox, I check each one of them manually and get back to them, I promise.
And I wouldn’t mind if you think this piece helped and would like to hit the share button and spread the word around.
How to Use the Undo and Redo Commands?
I cannot even recount that how many times the undo and redo shortcuts have saved my life. These are one hell of a gem and have been a life savior, at least for me. Since you have landed here then you might be interested to know how to use the undo and redo commands, right.
So, this article will tell you how to use the undo and redo commands along with step by step guide.
So, without wasting any time further, let’s dive deep into this and explore. So, let’s get started:
How to undo and redo?
Okay, you want to take a step back or two, you can easily do that using an undo command. But the key point to take a note is that this is entirely controlled by the software on which you are trying to apply the undo commands. Some of them allow multiple undo’s while some of them allow a single one. For example, MS paint allows a single undo while in Adobe Illustrator you can perform multiple undo operations.
So, in this section, we will see how to undo and redo in some of the major softwares.
We will first go to MS office. How to undo and redo in MS office? So, let’s get started:
Step #1: First of all, you are required to open MS Word on your system. We are taking MS Word for illustration purposes; you can go with any of its products. Once you have opened MS Word, then you now need to move on to the next steps for further proceedings.
Step #2: Perform any action to an existing Word document or a blank document. After that, if you wish to undo your operation then press “CTRL + z.” This will revert your changes.
Additionally, if you want to redo an action then you are required to press “CTRL + y.” This way you can quickly perform the redo operation in Word.
Alternatively, in previous versions of MS Office, you may find the edit option from which you can also perform the same task by clicking on the undo and redo options.
Let’s see how it can be done in MS paint.
Step #1: First of all, you will have to launch MS Paint on your system. Once you have done that, open the desired image file, or you can even create something of your own.
Step #2: Oh, you made a mistake and wanted to undo the action. Press “CTRL + Z” to get back a step back. If you want the redo the step then just press “CTRL + Y” to get the needful results.
Moving on, we will see how to redo and undo in Adobe Photoshop. So, let’s get started:
Step #1: Open Adobe Photoshop on your system. Once launched, you are now required to open any existing project on which you want to perform these actions.
Step #2: Now, if you want to undo or redo your steps, you have two options, either you can go with the usual “CTRL + Z” keyboard shortcut which will get you exactly one step back, or you can go to edit option and then select the appropriate option from there.
Alternatively, to undo your steps, you can also go to the history section of Photoshop from where you can also see what steps you have gone through till now. To go to history, you need to click on the Window option from the top navigation menu and the locate the history option. Once found, you need to click on it. This may open a history panel from the right side from where you have a look at your steps.
Now, if you wish you can select the desired steps that you want to undo and then delete them by clicking on the dustbin like icon as shown. This will produce the same output as the undo command, but the difference is that you can revert as many steps as available.
To say the least, CTRL + Z and CTRL + Y are the undo and redo global actions for any Windows program. So, what if we want to perform the redo and undo operations on a Mac? If you are thinking about the same, then the following section is a must visit for you.
In Mac operating system, the alternative for CTRL + Z is “Command + Z” and for the redo operation the alternative is “Command + Shift + Z.” The Command key in Mac is equivalent to the CTRL command in Windows.
Also take a note that not every action your perform can be redone and undone. So, if these keys don’t work in some cases, then you might have performed those actions.
[Additional Information]: Some useful keyboard shortcuts.
- CTRL + SHIFT+ESC: Opens Windows Task Manager
- ALT + TAB: Switch to another running program
- ALT + SPACE: Displays the foreground window’s system menu.
- ALT + F4: Closes the current window
- SHIFT+DELETE: Delete item permanently without placing it into the recycle bin
- Windows Logo + L: Lock the computer
- Windows Logo + R: Open the Run dialog box
- CTRL + F: Finds for terms in a Window
- Windows Logo + M: Minimizes all open Windows
- Shift + Windows Logo + M: Undo the Minimize all (opposite of Windows Logo + M)
- Windows Logo + D: Display desktop by minimizing all open Windows
- Windows Logo + TAB: Cycles through running programs (Function similar to Alt + Tab)
- CTRL + ALT + DEL: Referred to as “Three finger salute” often used to interrupt a function. It provides a bunch of options like task manager, log off and others.
So, this was all about how to undo/redo edits? We hope that this article must have added unique value to your knowledge base.
If this article has helped you in any manner, then do let us know through the comments section. If you have any suggestions or remarks, then those are also cordially welcomed. Also, do not forget to like us on our various social media channels.
Stay tuned for more of such articles.
Keep visiting for more. Thank you for passing by.
How to Speed Up Windows 7 Performance
No matter how fast your new computers might be, they all seem to get slower over time. Because, there is a new kind of excitement to play with new computer and to install lots of software’s on it. The first program which we install on our new computers is anti-spyware and antivirus tools, to stay from viruses. I know, it’s an essential program but what we actually do, we install more than one antivirus program. Next, we download lots of unrecognized junk softwares from the internet. Obviously, your new computers gradually decrease the performance and one day when you are trying to open a program or file then it takes more time to open up.
So, Whatever the cause, there are lots of ways to speed up Windows 7 performance and make your PC work better without upgrading your hardware. Here are something that will help you in installing Windows 7 custom themes.
Tips to Speed Up Windows 7 Performance
Turn Transparency Off
The glass transparency uses more resources of a PC from the Aero feature, you can disable by following simple steps.
Step 1: Go to personalize. (Right Click on desktop > Personalize)
Step 2: Click on the Window Color icon at the bottom of window.
Step 3: Uncheck the box to disable transparency.
Step 4: Click on save changes.
This will save some resources from being utilized and Speed Up Windows 7 Performance.
Turn on only required Visual Effects
You have to turn on only those visual effects that are essential and required by you. You can optimize how menus and windows appear by following simple steps.
Step 1: Open My Computer > Click on System Properties >Click on Advanced system settings (left hand side).
Step 2: A small window will open up and from there go to the advanced tab and click on settings (performance).
Step 3: Now here you can go for any of one option.
Option 1: Click on checkboxes as shown in the image below.
Option 2: Select (dot) “Let Windows choose what’s best for my computer”
Step 4: Click on Apply.
Enable Writing Cache for Storage Devices
This option will tweak your storage devices such as internal disks or removal drive to give the highest possible performance, to enable just you need to follow the below simple steps.
Step 1: Open Device Manager (Right Click on icon My Computer > Click on Manage)
Step 2: In Device Manager, click on disk drives to expand the attached drives to your computer. Here I have two drives, one is the internal hard disk and second is pendrive.
Step 3: Firstly, double-click on internal hard disk > Click on Policies tab > Check Enable writing cache on the device > Click Ok
Step 4: Now, click on another drive (pendrive) > Click on Policies tab > Select (dot) Better Performance > Click Ok
This will surely optimize the usage of cache memory and Speed Up Windows 7 Performance.
Turn off unnecessary Windows Features
Windows 7 comes with lots of features and we all know that we are not using all the features of it so it also allows us to turn on or off Windows features as per our requirement. That will also speed up the startup process for windows 7. For that, just follow the below simple steps.
Step 1: Open the Start Menu, type Windows Features in the search box, and press Enter.
Step 2: Open up “Turn Windows Features On or Off” icon. In that, if you want to turn on any features then tick the check box otherwise untick the check box to disable the features.
Step 3: After turning on or off, you will have to restart your PC. That’s it.
Helps in reducing unnecessary usage of CPU and Speed Up Windows 7 Performance.
Disable GUI Boot
Disabling GUI boot literally reduces the startup time of Windows 7. Follow the simple steps to Increase Startup Speed Windows 7.
Step 1: Open Command Prompt (Win Key + R) > type “msconfig” > Enter.
Step 2: Click on the boot tab > Select your OS (Ex: I nave Windows 7). Then, below you will see many options from that check the box of “No GUI boot” and “Make all boot settings permanent” > Click Ok. I will ask for confirmation click yes and restart.
So, all these are the important tips to Speed Up Windows 7 Performance. If you have any problem or query regarding this then you can surely put your comments below and we will connect with you as soon as possible! Happy Tweaking 😀
How to Create Personalized Start Button for Windows 8?
Its a quite a few months since the Windows 8 has launched. If you are among those people who love to have a Start button still in windows 8, then here we are providing you a classic tip “How to Create Personalized Start Button for Windows 8?” Yes you have certainly came across several apps, softwares and extensions. But this is a complete different new dimension. Protecting your computer is also crucial. See 3 best antiviruses for Windows 8 that will definitely going to protect your computer from harmful virus.
While you won’t have to go traipsing around the registry in order to implement this technique – I already did that – you may be curious as to where the CLSID came from. Essentially, a CLSID key is a part of the registry that contains code that provides access to specific system objects in the operating system, such as system folders. The CLSID keys can be found in two places in the Registry:
HKEY_LOCAL_MACHINESOFTWAREClassesCLSID and HKEY_CLASSES_ROOTCLSID.
Now, under normal circumstances, you would never need to use a CLSID because it is specifically designed to be used by developers and the operating system. In fact, a CLSID is a 128 bit Hexadecimal number enclosed in braces, so it’s not very user friendly.
In any case, the CLSID that provides access to the Apps screen is
To use the CLSID to launch the Apps screen, you’ll use the Shell command. In order to launch a Shell command from a shortcut, you need to use the explorer.exe command. As such, the shortcut to launch the Apps screen consists of the following command line. (Take note that there are three colons between the word shell and the left brace. Also keep in mind that there is only one space in the whole command line between the .exe file extension and the word shell.)
To create the shortcut, just open the Documents folder, right-click on the background, and choose the New | Shortcut command. When you see the first screen in the Create Shortcut wizard, type the shortcut in the text box.
When you see the second screen in the Create Shortcut wizard, type a short name for your shortcut.To complete the wizard, just click Finish. As soon as you see the shortcut icon, right click on it and select the Properties command.
When you see the Properties dialog box, click the Change Icon button to open the Change Icon dialog box. By default the Change Icon dialog box displays the icons from the explorer.exe file. As you can see, none of the available icons are very exciting. However, if you click the Browse button, you can search for other files that contain icons.
Once your custom Start button appears on the taskbar, drag it all the way to the left side of the taskbar. So here you are with what you want to have. So go on and enjoy “Windowing”!
Tired of entering passwords again and again. See how you can remove passwords from Windows 8 to log in to your computer without unnecessary passwords.
How to use BitLocker to Encrypt your Files
Locker means a safe place where you can put your personal or important things hiding from others. We all have some things which we don’t want to share with others same as in the computer you have any important data that you want to hide from the outside world. For that, there are many software available over the web and as well as well-known by you so no need to describe it.
But if you want to lock your Hard Drive partitions without any software then? In that case, Microsoft has provided one wonderful tool known as “BitLocker” in Windows Vista, 7 and 8 for encrypting your entire Hard Drive partitions. Using BitLocker you can lock any volume on the computer even the one you boot from. But a question arises in your mind that How to use it, right? So, I will show you two different modes to use BitLocker on your computer. If you wanted to Defrag the Hard Drive, you should see that.
1. “How to use BitLocker on a normal/data volume”
2. “How to use BitLocker on Boot volume”
Let’s see the first mode:
1. How to use BitLocker on a normal/data volume?
A simple way to enable BitLocker – right click on any volume and select “Turn BitLocker on” to start the locking process. After clicking a window will pop-up (as shown in the figure below) asking to enter a password to use with the drive – you will also ask to say a copy of the recovery key somewhere at safe place and then it will begin encrypting your drive.
By this method you can lock all the drives on your computer except “C:/ drive” or “Boot partition”.
Now, the second mode:
2. How to use BitLocker on Boot volume
Yes, it is true that you can encrypt the main operating system drive, but this has some special requirements since the drive has to be unlocked before boot. First of all this requires that Windows has a seperate boot partition that isn’t encrypted; in case if you don’t have then create a separate boot partition. The second requirement is that your system include a TPM (Trusted Platform Module).
If you try to encrypt your boot volume without satisfying the above to requirement then it will give an error as shown in the figure below.
So, in that case you will need to configure your system to use BitLocker with a TPM. Here is how you can do that.
- Press [win + r] and type “gpedit.msc” in it and press enter to launch the Local Group Policy Editor
- Now, browse to – “Computer Configuration > Administrator Templates > Windows Components > BitLocker Frive Encryption > Operating System Drives
- In the right panel. double click the setting “Require additional authentication at startup” and select “Enabled”
- In that please check the below options that “Allow BitLocker without a compatible TPM…” is checked.
- Then, Click Ok – you are done.
Now you will able to start the BitLocker process on your system drive, and will have the option to either enter a password on startup or insert a USB drive to boot.
If you have any problem regarding “BitLocker” then put your comments below so that I can surely help you to get rid out of your problem. Hope this guide helped you to understand how to use BitLocker.
PC taking more startup time? Change the Startup program to boost the startup process in windows 7.
How to Speed up the Start up Process for Windows 7?
Microsoft Windows is undoubtedly the most popular ever operating system for desktop PCs. Though new Windows 8 is out since a year or so, there are plenty of people who still use Windows 7 OS. Electronics, Computing, Communication and Information technology are the fields that change rapidly over the span of time. User has just adjusted to a system and he/she will have a new update in the same segment. There are two aspects to this phenomenon and requires another post to give justice. If you are one of those users who still have Windows 7, you may have noted a fact that it takes a bit long to start up. Sometime it may irritate you. But nothing to worry, here we are once again to help you with proven tricks along with screenshots.
I personally believe that Windows is a system that has plenty of hidden features may be due to the reason that Microsoft provides higher privilege to their users as compared to other Operating system developers. So using those hidden tricks here we are with a tutorial How to Speed up the Start up process for windows 7? Tired of using Windows 7? Upgrade Windows 7 to Windows 8 using the Dual-boot method.
If you are editing registry don’t mistype anything, otherwise, it may cost you in form of crashed window. So perform this operation with optimum concentration and confidence too!
Find run option in your windows. If you can’t find it try this… Windows key + R
After that you will find a box titled Run, and space with a writing curser
Type “Regedit” or “Regedit.exe”
Click Ok or Press Enter
A window titled User Account Control (UAC) will appear. Click yes on this window.
Now you will find a registry window.
- On the left side of the Window, locate the key “HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSessionManagerMemoryManagement PrefetchParameters.”
- In the right pane, double-click EnablePrefetcher.
- Change the value to 2 and click Ok.
- In the right pane, double-click EnableSuperfetch,
- Change the value to 2 and click Ok.
- After done with all these settings close the Registry.
- Restart your system in order to configure the changes.
So here you are with your Windows 7 which really start up faster. Feel free to suggest us or review our tutorial. We are open enough to criticism also. If you don’t know how to boot the computer in Safe mode, you should see that.
Tips10 months ago
How to Change Language in Google Chrome?
Windows10 months ago
How to Assign a Static IP Address in Windows 7, 8, 10 or XP?
Mac9 months ago
How to Install GIMP for Mac
Linux8 months ago
How to Install Zorin Linux using Bootable Pendrive
Tech9 months ago
How to Make a Yahoo Account Without a Phone Number?
Computers10 months ago
How to Get Moviebox For PC?
Tips10 months ago
How to Switch from Aol to Gmail?
Tips10 months ago
How To Change Font of Internet Explorer, Firefox and Google Chrome?