How to change the IP address in less than 30 seconds? That’s your problem? Well, you’re in the right place and I already know a couple of things about you.
First, you need to change your IP address, that’s kinda obvious. And second, you’re going to do something either for fun or for professional reasons which require you to hide your identity and cover tracks fast, faster than a VPN will do the job for you, well anyway I’ve got the perfect solution.
In a normal case where time isn’t of the essence, I’d have recommended a VPN of course as a solution to your problem of how to change the IP address. But I get your “special” requirement, but before addressing the issue, let’s start from the basics, shall we?
What is the IP Address and Why Would You Want to Change it?
I’m pretty sure you already know the answer, but still let me just humor you.
The IP Address is your footprints on the internet, it’s like your cell phone number, something that can be traced back to you, to your geographical location and in some cases even your direct name registered with the ISP.
So the “why would you want to change it” answer is pretty obvious isn’t it?
You don’t want the world to know what you’re doing on the internet, or maybe you don’t want them to know it’s you who did something specific, something that isn’t legal or allowed by the law enforcement services.
The most common scenarios when someone wants to hide their IP Addresses:-
- Hiding their online identity.
- Doing something illegal.
- Accessing blocked websites, as some websites are blocked in certain countries, hence changing the IP address “virtually” puts you in a different country and hence makes the website accessible for you.
So well yeah there is quite a number of reasons when and why someone would ask questions like How do I change my IP address or How to Change IP Address in simple steps.
Now, there are simpler solutions to it than a VPN, let me just list the reasons out why you might not be comfortable using a VPN:
- VPNs aren’t always free.
- VPNs mostly keep logs. Meaning they know your real IP addresses.
- They’re slow. They get you a list of third-party servers and IPs you can use, but scanning, finding and then connecting to one takes time.
- Reduce Internet speed:- Yeah speed capping is a major issue with just about any VPN you can imagine.
How to Change IP Address in Less than 30 Seconds:-
So we’re down to the section you’ve been waiting for, let’s get right to it. In fact let me assure you, the whole process takes around just 3 clicks, and less than 30 seconds (of course)!
You need to hit the Start button on your Windows Operating System, and type “cmd” in the search box.
It will bring up the terminal for you, where you need to type this exactly:- Ipconfig /release
This will shut down your internet connection for now, but don’t worry about that. Once the above command has been carried out, just type “ipconfig /renew”.
You didn’t even know it and you got yourselves a brand new IP address! Now, this was the simplest method to do it. And a good thing? You can do it as many times as you wish, no limitations. Although I’d seriously advise against using it very often, it’s more of a last-minute retreat.
Other Methods to Change IP Address:
The best alternative for you, of course, is using a VPN! A VPN is a third-party Virtual Private Network. In simpler English, take them to be a bunch of freelancing IP addresses, which the VPN lets you use either for a cost or sometimes free.
The other alternative is to use a SOCK, which is a more advanced and secure method but it’s complicated and is almost never free, additionally it can’t be set up in 30 seconds, so if you’ve been looking for the 30seconds thing specifically, I’d say the primary method I discussed here to change IP address should help you out.
So that was all Folks on How to change the IP address in less than 30 seconds. I’m sure it helped you, right? It’s pretty simple, and fast, and there’s no third-party software download or registration needed so yeah I think nothing could be simpler.
Although you can still go with the other options I’ve discussed to change IPs, but if you want the “best” browsing experience and your identity exposure isn’t a problem, in that case, the native IP assigned to you by default is the best bet.
Anyway hope this piece helped, if you’re stuck somewhere or something isn’t working, do make use of the comment box and let me know I’ll get back to you. Also, do hit the share button, keeps me motivated.
How to Check Laptop or PC Specs?
We all spend thousands of dollars on getting the “right” computer for us, don’t we? Some of us need it for Gaming, some of us need it specifically for office use, while others for working with Graphics and video editing and so on.
So that’s what this article is about, we will deal with How to check laptop or PC specs? With all the modern models coming every day on top of each other, it’s pretty hard deciding which one to go with because of course all of them claim to be the best.
But once you know your specific PC specs, you’d know what you have (or don’t have), and you can upgrade accordingly, right?
Of course, I’ll be answering how to check laptop or PC specs, but I’ve always felt it’s better to understand the “why” before the how. Meaning, let’s first deal with “why” you’d want to learn how to find computer specs in the first place.
Why Check Laptop or PC Specs?
So there might be a hundred different other reasons why you might want to check your Laptop or PC specs, the most common reasons being:-
- To analyze your current system, so that you know what other upgrades you need for better performance.
- Your system might be slow, and you’re looking for the exact hardware to replace. Meaning, just because your system is slow doesn’t mean it’s always a RAM error, maybe your mother-board is too used up and you might be thinking how to check what motherboard I have? Or maybe your Hard-disk isn’t sufficient and so on.
- Running Games:- Well this one is my personal favorite. Before I buy any game, I go online and check it’s minimum requirements, and once I get a hold of the requirements, I’d need to know what are my computer specs and to know that, I’d need to learn How to view laptop or PC specs to assess if my system will be able to run the game or not, right?
How to Check Laptop or PC Specs?
So finally we’re down to the section you’ve been waiting for, let’s have a look at How to view laptop or PC specs.
Well, on most laptops, you might have stickers on the side of the battery which tells you your PC specs. (Unless you’ve already peeled it off).
So let’s go with a more “stable” solution for how to check your computer specs.
How to Check Laptop or PC Specs:- Memory, Processor and Operating System
Right-click on My Computer, and click on Properties.
Clicking on it will directly bring up your system properties. Here’s mine:-
Let me explain the metrics to you:-
- 1. Rating:- The Rating is the overall rating of your system out of 5. Mine if 4.5 so I’d say it’s one of the best specs you can get for a general laptop at my price-range (mine cost just 19,000INR / Around $300) As long as it’s above 4, you can be happy.
- 2. Processor:- If you’re checking out your specs for gaming purposes, this is the most important metric for you. Games have very strict processor requirements. 2.40 GHz is the CPU speed. The GHz controls the copy-pasting speed, file opening speed and stuff like that. My system is 8 years old, but today you’d get 3-3.5ghz CPUs easily.
- 3. Installed Memory:- This answers your question “How to identify RAM”. Because the memory shows you exactly how much of RAM your system got. In today’s market, 6-8GB is a general preference.
- 4. System type:- Well you probably already know that Windows has 32 as well as 64-bit versions right? They both have their own pro’s and con’s, for eg. on the 32 bit you can only have a max RAM of 4Gbs. But anyway this gives you your Windows bit.
#Method 2 to Check Laptop or PC Specs:-
This is method is comparatively simpler than the above one.
Just click on your Start button, and type “system information”.
Select the system information option at the top, and you’ll get a list that has almost every single bit of information that exists on your system.
It shows you your RAM, PC Model, Manufacturer, Windows-bit and everything else! In fact, if you look closely you’ll notice that it gives you more information about your processor than the above system properties screen.
How to Check which Graphic Card You Have?
I’m making this section separately because the system properties don’t list your “Graphics card specs” on the page.
Again go to My Computer > properties. And then click on “device manager”.
You should see “display adapters” just click on it and it would show you the graphic card your system owns.
How to Check your MotherBoard Make and Model:-
Well, the Motherboard is one of the foundations of your whole system. You might want to know this because just because you bought an 8 GB DDR3 ram doesn’t necessarily mean your motherboard will support it, the same goes for Graphic Cards or pretty much any other hardware.
So well, of course, you need to know which Motherboard you own and then upgrade it accordingly, right?
In order to check your Motherboard details, go to the start menu, in the search box type “cmd”.
This would bring up the command prompt. Type / Copy the following string exactly as it is there and then hit enter:-
wmic baseboard get product, Manufacturer, version, serial number
As you can see it’s a basic string to get the Product Manufacturer, version and serial number. Once you hit enter, you’d get all the details.
You’d get the version, model and every other detail that you need. Then you can just Google those details out to find what’s the maximum RAM or graphic card they support!
So that was all I had on How to check Laptop or PC specs folks. Hope this piece helped. If it did, I’d appreciate you leaving your feedback in the comments section.
Also if you’ve got a question or doubt, I’d be more than happy to get you your answers as soon as time allows me. Of course, I wouldn’t mind if you decide to extend a helping hand by sharing this article on your Social media, which keeps the lights on for us to keep going over here.
How to Hide Files and Folders on Every Operating System?
I loved those days when knowing answers to questions like How to Hide Files and Folders on Every Operating System made me feel like a pro hacker, although that’s not the case anymore.
Just about anyone with a working computer system can find his way around answers to questions like How to Make an Invisible File, and How to Make an Invisible Folder.
And trust me some of the methods in this article were actually “discovered” by me back when I was around 12. Of course, others might have known about them already, but I didn’t and I came across those methods just because I was desperate enough.
But before getting into the details of How to Make an Invisible File on Your Desktop, let me get into some of the basics.
Let me tell you, you don’t need to download any software, neither paid not free, all the methods I’m discussing are pretty straight-forward and are almost the official features of Windows (they were intended for different purposes, but we will be using them to our advantages!)
How Far “Hidden” will These Methods Be:-
So okay you might be wondering how good will these file hiding methods be.
Let me tell you, Windows has an official “hiding” option, which isn’t really hidden anymore so although I’d be discussing it, I’d say it’s 2/10 on a rating scale.
Although the other methods I’d be discussing are almost like password protecting the files and folders, just without using any software or code or anything, so let’s scale them 5/10.
And then there’s one final method which literally is a “password protect” method, so considering it’s a real password that method goes for around 8/10 (because it still can be cracked with Brute force or good-guessing!)
But well considering you don’t work for the FBI or the NSA, you don’t need 10/10 methods either, so yeah these methods will do for you.
How to Hide Files and Folders on Every Operating System:-
Method #1 to Hide Files and Folders:-
Select the file you want to hide, and right-click on it, then select Properties.
Now click on the “hidden” checkbox, and click on OK.
Done! The file is now hidden.
Now this is the first method I was talking about, and it’s not exactly a secret anymore as it exists from the days of Windows XP so every guy knows about it, so it’s the least secure way to hide files and folders, but it’s still away.
Method #2 to Hide Files and Folders:-
These are the methods I said I discovered myself (and later found out on the internet that the world already knew about them, my bad!)
This method comes in handy if you’re trying to hide a “file” and not a folder. I mean something that has an extension, like album.jpg document.dox notepad.txt etc.
So okay select the file you want to hide> Right-click > Rename.
Now check out the extension of the file, whatever it is, change it to something else. Some common extensions you can mixup are:-
So you can change your files’ extension to any other extension from the above list (or even any other extension types you know!)
For eg., if I want to hide password.txt file, I can rename it to myphoto.jpg (I’ve renamed the name to make it look less suspicious)
And when a box like the following comes up, just click on OK.
So what you did is, you made a notepad file look like a photo. First of all, a photo is not something as interesting as a “password” file. And secondly, it’s originally a notepad file, while I used a photo extension (.jpg), so it partially corrupts the file and it won’t open.
Additional Security:- Now if you want to make it totally “hidden”, I’d suggest placing it with other filetypes of the same type.
Meaning I’d place this photo (really the password file) with some of my other photos. So anyone looking in the folder will think it’s just another photo file that was corrupted for some reason among other photos.
How to Get the File Back:-
Just rename it back to the original extension. The “name” doesn’t matter. Meaning if originally your file was “passwords.txt”, even renaming it back to “I want my file back.txt” will work, just keep the extension same.
Method #3 to Hide Files and Folders:-
This one consists of “password protection” but I’d still scale it below the above method when it comes to security, because of passwords? If you ask me, I’d say they’re the least secure part of your digital life.
So anyway, this comes in handy in almost all the situations, if you’re trying to hide a single file, or if you’re trying to hide more than one file, or if you’re trying to hide folders well it covers everything.
Just select the File / Files / Folders you want to hide, and right-click > Add to Archive.
Now go to the “advanced” tab and click on “Set Password”. Where a new pop-up box would come up, and you just enter your desired password in the box and click ok.
Done! This will compress all your files and folders into one single file (if you’ve more than one file you’re trying to hide!) and password-protect them.
So next time anyone tried to decompress the archive, they’ll be asked for the password.
So that was all I had on How to Hide Files and Folders on Every Operating System guys. Although let me tell you there’s one more method How to create blank folder names in Windows but for some reason, it stopped working with the new windows releases so I omitted it from this article.
But anyway I’m pretty sure the methods I’ve discussed will help you out with hiding your files and folders good enough.
If this piece helped you, do spread the word by sharing this on your social media timelines, that’s the only return we ask from you guys.
How To Password Protect Any Windows Program?
How To Password Protect Any Windows Program? That’s your problem? Well, it gets solved right here and right now. That’s what this article is about but that’s probably already clear is it not?
Now it’s easy hiding files and folders on windows, but when it comes to how to set a password for Program (Application) in Windows that gets a bit complicated doesn’t it?
I mean you don’t have to “hide” it, you’ve to password protect it. And then it’s not a file or a folder, it’s an executable, an application, a software. So well yeah I do agree it sounds a bit complicated, but it’s not.
I’ll just go with some of the traditional methods to password protect any Windows program without any software first, and then I’ll list a couple of third-party freeware (free software) too if you don’t want to do it manually.
Well before getting into all those technicalities, let’s get into some basics.
What is the Difference Between Password Protecting and Hiding a Program?
Password Protecting an application and hiding it is basically meant to the same end, keeping the application safe and restricted to unwanted access.
But there’s this difference between password protecting and hiding the applications. When we hide them, others don’t know they exist so they don’t try to access them. But when we password protects it, it’s not always necessary that they’re also hidden (although that’s an option).
Hiding is a basic level of security, which if bypassed reveals the files and folders. While Password protecting isn’t as easy to bypass, because even if the programs are already revealed, cracking a password isn’t that easy.
So okay let’s get down to business.
How To Password Protect a Folder in Windows:-
Now there are numerous ways to go about it. Let’s start with the one that’s the simplest.
Steps:- I’m listing this as the simplest method because you don’t need any other third-party software to do it apart from Winrar. (Which 99.99% of Windows operating systems already have!)
So Right-click on the folder you want to password protect, and click on “Add to Archive“.
Now click on the Advanced button and click on “Set Password“.
A popup would come up asking you for the password you want to set for it. Just set the password and click on Ok.
Done! Now whenever someone tries to extract the file, they’d be prompted to enter the password for the file.
Simple enough isn’t it? Well, this is the fastest and simplest method to Password Protect a Folder in Windows.
How To Password Protect Any Windows Program:-
Now that we’ve password protected a folder, let’s get down to password protecting the Windows Programs.
Again, I’d say Winrar can be our simplest solution.
Well to access any application on Windows, we need to double click on the “executable” or .exe file of that application, right? So it’s basic knowledge that password protecting that .exe file would password protect the whole application.
So the simplest solution to Password Protect Any Windows Program is:-
Copy the executable file of the application you’re trying to password protect to a new folder.
See? The .exe file is now in a folder. And delete the original .exe file from the desktop or any other place it might exist. That way, the only copy of the .exe file of the application that exists on your computer would be this file in your folder which you just copied.
Once that’s done, just proceed with the same steps as mentioned in the above section. Right Click > Add to Archive > Advanced > Set Password
Now I do agree the above method was just a “solution”, the simplest one probably but not a very professional method to achieve the goals. If you’re looking for more professional methods, continue reading.
Method #2 to Password Protect Any Windows Program:-
You need to download WinGuardPro. It’s a free application that supports Windows XP, Vista, 7, 8, and even Windows 10. So you can also use this as an answer to questions like How to lock specific apps in window 10.
Now It’s only around 3mbs, so yeah it’s light. Once you’ve downloaded it, install it and run it. It’ll ask you to set up a new password for the application, so set your password.
Once you’re done, run the program you want to lock. Meaning double click on the application so that it’s running on your system. And then click on the “Lock program” button inside WinGuard Pro.
Now it will show you all the running programs on your system. Just select the program you want to lock, and click on Lock.
Done! The program would be locked. Now every time someone tries to access that application, he would be asked for the password you set with the application.
Also, the added bonus is, WinGuardPro doesn’t just lock any specific .exe file copies, it locks the whole code. Meaning even if there’s a copy of the .exe file somewhere else on the computer other than the one you locked, still it won’t be accessible without the password.
So that was all I had on How To Password Protect Any Windows Program guys. I hope this piece helped if it did I’d love to hear your feedback in the comments section.
Also, do let me know if you’re facing an issue, and if everything worked as planned, I wouldn’t mind you guys hitting the share button and spreading the word around.
How to Fix Dns Server Not Responding?
How to Fix Dns Server Not Responding? That’s what you’re looking for, right? Well, it’s one of the most common Internet problems which will get solved by the end of this article.
But before getting into all the details, let’s start from the basics.
What is a DNS Server:-
I like to explain DNS servers in terms of “Phone directories of the internet”. That’s what it basically is. Just like in a phone directory there’s the name of the person on the left side and his number on the right.
Similarly, a DNS server is a record of Website addresses and their IP addresses. Now how this is important is, we humans can spell out websites in English and other languages, but the internet only understands numbers, that’s Ip addresses.
So when we type in Knowledgecage.com, it’s the DNS that looks up in its directory and then connects the URL to its IP addresses which are how we are able to access the websites.
How to Fix Dns Server Not Responding?
Now there are quite a number of reasons why this might be happening, so I’ll just list out the most common solutions to the problem and that should help you fix your DNS server not responding issue.
We will try to determine the point of origin for the problem, see where exactly the problem is happening and then solve it.
#1 Verifying your Connection:-
The most probable cause of this issue is that your internet connection isn’t really connected. So all you’ve got to do is, verify the connection.
Let’s say if you’re on a Wi-fi connection, just connect another device to the wifi and see if it works. Or if you’re on broadband, try accessing the other machines on the same connection.
If you’re able to connect to the internet in both cases, then move on to the next section. If you’re unable to connect to the internet on any one device, it means there are connection issues with that device and you need to fix that. (Now the issue might be a hundred things, so it really depends on the situation.)
Yet another method to test your internet connection is to download any other browser and then try to access the internet with it. If you can, it means your browser had some issues, and if not then well you need to fix your internet connection.
Method #2:- Flush DNS
There’s a DNS cache buildup on your system for several positive reasons. But there are chances it gets outdated and hence can’t correlate with your connection.
So the bottom line is, you need to manually flush your DNS to fix your DNS server isn’t responding problem.
Click on the Start button, and in the search box type “cmd”.This will bring up the windows command prompt.
Now type ipconfig /flushdns
Give it some time to process and once it’s done, restart your connection.
#Method 3:- Changing DNS Manually:-
There’s yet another option for you which allows you to change your DNS server manually.
So click on the start button again, and in the search box type ncpa.cpl > Click on the option shown in the screenshot.
Right-click on your Internet connection and select properties.
Click on “Internet Protocol Version 4” and then click on Properties.
Now click on the “Use the following DNS server address” and enter the following DNS addresses in the respective fields:-
- Preferred DNS Server:- 220.127.116.11
- Alternative DNS server:- 18.104.22.168
Make sure that you’ve checked the “validate settings on exit” button so that you don’t have to restart your computer for the changes to take effect.
#Method 4 to Solve DNS Server not Responding:-
It’s called the PowerCycle method, well because we will do something that’s like a cycle and we will do it to the power hence the name.
All you’ve got to do is, Powerdown your router > Wait for 60 seconds (so that no residue charge is left) > Power it back on.
#Method 5:- Disabling Extra Connections:-
In my case, this solved the issue.
Well at times, Windows creates extra connections on your system apart from the one you use, and this at times interferes with your current connection.
So what you’ve got to do is, go to Control Panel > Network and Sharing Center.
Now click on Change Adapter Settings.
And see if any other connections are active apart from the one you’re using. In my case, I’m using only the “Not Found Wireless connection”, while there are over 4 other connections active.
So what you should be doing is, Right-click on these extra connections, and click on Disable.
Of course, once you’ve disabled them you also can delete them, but I wouldn’t suggest that because disabling does the job and additionally there might be situations in the future when you might need those connections.
Well, I listed as many as 5 different solutions to the problem, right? I’m pretty sure they’ll be enough.
But if for some reason you’ve got a stubborn connection, you can also try:-
- Disabling the Firewall.
- Try to Connect in Safe mode.
So that was all I had on How to Fix Dns Server Not Responding guys. I’m sure this piece should’ve solved your problem by now.
But if it still pertains I’d suggest getting in touch with your ISP provider. Anyway, I’d love to hear from you guys down in the comments section, so do make use of it.
A share of this article on your social media too won’t go unnoticed either.
How To Set Up Your Own WampServer?
The title of this article is “How To Set Up Your Own WampServer”, so I’m pretty sure no one is oblivious to what this article is going to be about, right?
So I won’t beat around the bush either, I’d just make it clear and simple for you, in fact, the simplest process for How to install and run wamp server on your local machine.
But before that, as always, let’s get started from the basics.
What does WAMP Mean?
Well, to some of you it might seem that WAMP is a kind of software of program that will just create a server for you instantly, that’s not entirely correct.
WAMP is just the short-form of “Windows, Apache, MySQL, and PHP”. So individually, WAMP isn’t really a thing, it’s just a collection of things you’d need as solutions to questions like How to run PHP files using wamp server.
Now all those things which WAMP stands for are needed in order to let you host your site on your local machine (WAMP Server), so using WAMP makes it easier or else you’d have to download each of those packages separately which is just 3x the time and energy consumption for the exact same files.
So okay let me get a bit deeper into those files right? Only then you can get a hold of what exactly they are and why you need them.
Windows:- It makes sure that the program is compatible with the Windows operating system.
Apache:- This is the real magician. It’s the program that lets you host the websites.
MySQL:- I think you already know about it, but in case you don’t, your HTML files aren’t complete in themselves, on any website, there are one or more login credentials, like usernames and passwords, and they’re stored in the MySql databases.
PHP:- It’s more of an optional option but anyway just “HTML” isn’t enough to create and run a website is it? That’s where PHP comes in, it makes sure you’re able to create something more than just static Html websites.
Now considering you’re not on Windows and are on Linux instead, in that case, you’ll be needing a LAMP, but that’s for another article, let’s keep this piece confined to questions like how to open wamp server, and how to test wamp server.
How To Set Up Your Own WampServer:-
So okay we’re down to the section you’ve been waiting for, the setting up of the WAMP servers.
First of all, download a WAMP package.
Installation is pretty simple, nothing out of the box there so just proceed with it, and once you’ve completed the installation, you’ll get a box like this on the right -bottom of your bottom bar which confirms that installation is successful
Now, type “localhost” in the URL bar of the program, and you’ll be greeted with the default welcome screen, if you’re getting the below screen, it means that all the files (apache, PHP, etc) have been installed correctly.
Done! Well yeah, that’s pretty much it! You’ve your own WAMP server up and running, but still, let me get you some more answers.
Hosting the Files:-
So now that you’ve your own WAMP server up and running, where do you put the files, right?
Doesn’t matter what you’re trying to host, all the files need to go to the “www” directory of your Wamp server. And you access that by just right-clicking on the WAMP icon in the notification bar at the right-bottom and selecting the WWW directory.
Method #2 to Host your Files on Local WAMP Server:-
Considering you’ve installed WAMP in the default directory, it would be the C:// directory.
In that case, all you’d have to do is, take your files (index.php, style.css) or whatever, and paste it in this directory:-
It’s the same thing as pasting it on the www directory, just a different method.
And once you’ve done that, you can again go back to your WAMP server, hit “localhost” in the URL bar and you’d get the results of whatever you pasted.
Okay so if the files are working it’s time to put your site online, right? “localhost” means your website is only accessible by “you” on your local system.
How to Take the Local WAMP Server Online:-
So okay right-click that little icon in the notification area again, and select “put online”.
Now, the apache configuration files are set to restrict incoming traffic by default, so that only you (localhost) can access the site. But we need to allow the permissions, right?
In order to do that, right-click the notification bar icon> Apache > httpd.conf
In that file, find the line that says
Deny from all".
And you need to change it to:-
Allow from all
Once that’s done, just restart the services again, that you can do by right-clicking the notification icon again, and clicking on the restart option.
Done! If you did everything right, now your website is accessible worldwide!
Important:- It’s not advisable at all to use a local machine for hosting websites, opening up your local network to the world is similar to giving a key to your house to your whole country. Instead, use professional hosting companies like Bluehost or Hostgator maybe.
So that was all I had folks on How To Set Up Your Own WampServer. I’m sure I didn’t make it hard for you now did I?
So if the piece was helpful and you were successfully able to set up the WAMP server on your local machine, I’ll look forward to hearing your experience with it in the comments section.
And of course, if you’re stuck somewhere I’m here to help.
Computers3 months ago
How to Reset Macbook Air?
iOS1 month ago
How to Stream Torrents on iPhone?
Tech2 years ago
How to Tame a Horse in Minecraft?
Tech2 years ago
How to Receive Money through PayPal?
Tutorials2 years ago
How To Enable/Disable Chrome Pop Up Blocker
Tech2 years ago
How to Make a Yahoo Account Without a Phone Number?
Mac2 years ago
How to Use Apple Thunderbolt Display with PC?
Mac2 years ago
How to Install GIMP for Mac