Web
Analytics
Connect with us

Computers

How to Change DNS Servers in Windows 7?

Published

on

In this internet infused era, Domain Name Servers aka DNS plays a pivotal role. Even if you are not a tech savvy, you are still using DNS servers in some way or the other. Domain Name Server helps the machine by translating the human-readable name to the IP addresses.

So, in case if you want to know how to change DNS server in Windows 7? Then you are at the right place. Additionally, you will also get to know how to change DNS settings in MAC? So, let’s get started:

What is Domain Name Server?

how-to-change-DNS

If you want to know what are DNS settings, then you are at the right place. In order to be precise, DNS servers are the servers which translate the websites addresses and help you to connect with them through the means of internet. They are more like a domain directory which translates them to IP addresses.

DNS server address is primarily necessary because although domain names are easy to remember, the machines or computer access web entities based on IP addresses.

How to change DNS server in Windows 7?

The prerequisites for changing the DNS servers in Windows 7 are: You need to be connected to a network, and this is all that you will need.

Step #1: As the very first step, you need to click on the internet connection. The click has to be a right click. You can get access to the network icon which is usually positioned at the bottom right corner of the window just beside the clock.

Now, from the small dialog box which appears, you have to click on “Network and sharing center”. This will open a new window for you. For further instruction, you would like to see our next steps.

how-to-change-DNS

In case, if you can’t access the internet icon from the taskbar, then you should consider clicking on the up arrow button. From the box which appears, you will be able to access the internet icon.

Step #2: Now, once you are in the network and sharing center window, you need to click on the “Change Adapter Settings” option from the left pane. This will direct you to another window, where you will see a list of internet connections.

Step #3: Now, from the list of the web connection, locate for the internet connection to which you are connected. Once you have found the same then, you need to double click on it. This will open a dialog box for you. From the dialog box, you need to select “Properties”.

how-to-change-DNS

Step #4: You might be prompted to enter your system account control password or click on “Yes/No” to continue further. Just do the required as it will help you to finish the process.

Step #5: Once you are done with the previous steps and are on the “Properties” window then you need to scroll a bit to locate “Internet Protocol Version 4(TCP/IPv4)”. Once you have found the same then, you need to double click on it. This will open a box for you with different fields.

Step #6: Now, check the checkbox next to which “Use the following DNS server addresses” is written. Now, all that you need is to enter the “Preferred DNS server” and then the “Alternative DNS server”. Once you are done with the mentioned then you now only need to click on “OK” and then close.

how-to-change-DNS

For the sake of additional information, you should take a note that for Google DNS servers, you should consider typing 8.8.8.8 in the preferred DNS server field and 8.8.4.4 at the alternative DNS server field.

Alternatively, you can also type “ncpa.cpl” at the start section and it will directly take you to the list of internet connection. After that, you can proceed as specified above.

 

[Additional Information]: How to change DNS settings in MAC?

You might also be interested in changed DNS settings in MAC (if you own one).

Step #1: As the very initial step of this method, you are required to click on the “Apple” menu. Once the list has appeared in front of you then, you need to select “System Preferences”. This will redirect you to the “System Preferences” window.

Step #2: From the “system preferences” window, you need to locate for “Network”. Once you have found the same then, you need to click on it. Somehow, if you cannot access this, then one of the most probable reasons is that you don’t have administrator right. So, make sure to have one before proceeding further.

Step #3: Now, once you have successfully completed the previous steps then you need to click on your active internet connection. You can identify the active internet connection by the green dot next to it.
Clicking on the internet connect will direct you to a new window.

Step #4: Now, click on the “Advanced” button. From the following window, you need to click on the DNS tab which is positioned next to the TCP/IP tab. After this, you are required to click on the “+” button next to which IPv4 or IPv6 address is written. This will equip you with a privilege of adding new DNS servers.

Step #5: Now, add new DNS servers. For this, you will need to remove the old DNS addresses. Once, you have done the mentioned then you will now be able to access the blocked websites for which you updated the DNS servers.

Now, we are on a verge to end this article on “How to change DNS server in Windows 7?” We believe that we have crafted this article helpful enough to satisfy your curiosity and need regarding how to change DNS server.

Moreover, if you have any other information or query regarding this topic then do tell us via comments. We would love to hear from you.

If this article has helped you in any way then, do not forget to share it with your social circles.
Thank you for crossing by and giving it an enjoyable read.

A student of life, writer, technology freak, and a thinker.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Computers

How to Remotely Shutdown or Restart a Windows Computer?

Published

on

How to Remotely Shutdown or Restart a Windows Computer

Forgot to shut down your system and do not have direct access to it? What if I tell you that there is still a way? Do you want to know How to Remotely Shutdown or Restart a Windows Computer? If yes, then this is a must-read article exclusively for you.

So, without delaying it any further, let us get started with how to reboot remote PCs via the command prompt? So, let's get started:

How to remotely shutdown or restart a Windows computer?

Step #1: In order to get started with the process of remote shutdown or restart a Windows computer, you will first have to enable remote registry service on each of the systems that you need to manipulate.

For this, consider the following process. First, go to the Run section using the keyboard shortcut “Win + R.” This will open the Run dialog box for you. Now you need to enter “services.msc” without quotes and hit enter.

How to Remotely Shutdown or Restart a Windows Computer

From the subsequent window which follows up as the result of your recent activity, you need to locate “Remote Registry.” You may need to scroll down a bit for that, or you can perform a text search just by typing the few initials of the same. Now, right click on the “Remote Registry” option and then click on the “Properties” option from the menu that follows.

How to Remotely Shutdown or Restart a Windows Computer

Now, from the next dialog box, you need to set the startup type to “Automatic” and then click on “Start” button.

How to Remotely Shutdown or Restart a Windows Computer

This will enable the remote registry on your systems. Remember that you need to enable this on every system that you wish to shutdown or restart remotely.

Once you are done with the mentioned, then you now need to look out for our next steps.

Step #2: In this step, you are required to open the desired port on the system's firewall. To do so, you need to click on start button, and at the text area, you are required to type “Allow a program” and then hit enter.

How to Remotely Shutdown or Restart a Windows Computer

From the subsequent window, you now need to click on the “Change settings” button. Doing so, you will see the options to be active which were quiescent before. After this, you are required to scroll down till you find the “Windows Management Instrumentation (WMI).” Once, you have found that then you are required to enable it by clicking the checkbox next to it.

How to Remotely Shutdown or Restart a Windows Computer

Also, take a note that you must have administrative permissions on the remote system that you wish to shutdown or restart, failing which you won't be able to do the needful.

So, by far we are done with the basic setup. Now, we are all set to execute our commands in order to do the desired work. For that, we will have to look into the next steps.

Step #3: Now, on another computer, you are required to launch the command prompt. To shut down, the system remotely, type in the following command “shutdown /i” without quotes.  This will open a graphical user interface. Now, on that remote shutdown dialog box, you are required to enter the name of the system that you wish to shutdown or restart.

Additionally, if you wish, you can also warn the users about this. Also, you can specify whether you want to shut down or restart the system.

Once you are done with all these, then you are now good to hit the “OK” button. This will do the desired work for you.

Moreover, if you don't want to do this via the graphical user interface then you can directly type in the following command at the command prompt: “shutdown /s /m \\Shubham-PC /t 30 /c “Shutting down.” /d P:1:1”.

Change “Shubham-PC” with the desired system name and shutting down with your warning message. To restart the system, you need to replace /s with /r. Additionally, if you wish to log off the system, then you will have to replace /s with /l.

If you simply put this “shutdown /?” command on your command prompt terminal, then you will have all the list of commands relating to this.

Using Linux

Now, we will see how you can achieve the desired result using a Linux operating system. For this, you must have samba-common, package installed on your system. To do so, consider installing the package using the usual command like Sudo apt-get install samba-common.

This will install the desired package for you. After this, all that you need is to type in a command which requires the user account name of the system on which you want to preform the action.

You will also require the password and the IP address pf the system . Make sure to note that the user account must have the administrative rights in order to perform these actions.

Once you are all set to go then you can now type the command with the following syntax: net rpc shutdown -I ip.address -U user%password

Replace the IP address with the numerical IP address of the system, user with the user account name of the system and password with the corresponding password.

Once you are done with the mentioned, then all you need is to hit enter and voila, you have done that, kudos.

Alternatively, if you have remote desktop access, then you can also achieve the desired results.

Wrapping Up

So, this marks the end of this article on “How to Remotely Shutdown or Restart a Windows Computer?

We hope that this article must have helped you in your quest of knowing how to restart your computer remotely? 

If yes, the don't forget to give us a thumbs up on our different social media channels. Also, do not forget to share it with your peers so that they can be benefitted with this useful information.

If you have any query or suggestions, then make a comment in the comment section. We would love to hear from you.

Thank you for stopping by and giving it an enjoyable read.

Stay tuned for more.

Continue Reading

Computers

How to Use the Undo and Redo Commands?

Published

on

I cannot even recount that how many times the undo and redo shortcuts have saved my life. These are one hell of a gem and have been a life savior, at least for me. Since you have landed here then you might be interested to know how to use the undo and redo commands, right.

So, this article will tell you how to use the undo and redo commands along with step by step guide.

So, without wasting any time further, let's dive deep into this and explore. So, let's get started:

How to undo and redo?

Okay, you want to take a step back or two, you can easily do that using an undo command. But the key point to take a note is that this is entirely controlled by the software on which you are trying to apply the undo commands.

Some of them allow multiple undo's while some of them allow a single one. For example, MS paint allows a single undo while in Adobe Illustrator you can perform multiple undo operations.

So, in this section,  we will see how to undo and redo in some of the major softwares.

We will first go to MS office. How to undo and redo in MS office? So, let's get started:

Step #1: First of all, you are required to open MS Word on your system. We are taking MS Word for illustration purposes; you can go with any of its products. Once you have opened MS Word, then you now need to move on to the next steps for further proceedings.

Step #2: Perform any action to an existing Word document or a blank document. After that, if you wish to undo your operation then press “CTRL + z.” This will revert your changes.

Additionally, if you want to redo an action then you are required to press “CTRL + y.” This way you can quickly perform the redo operation in Word.

Alternatively, in previous versions of MS Office, you may find the edit option from which you can also perform the same task by clicking on the undo and redo options.

Let's see how it can be done in MS paint.

Step #1: First of all, you will have to launch MS Paint on your system. Once you have done that, open the desired image file, or you can even create something of your own.

Step #2: Oh, you made a mistake and wanted to undo the action. Press “CTRL + Z” to get back a step back. If you want the redo the step then just press “CTRL + Y” to get the needful results.

Moving on, we will see how to redo and undo in Adobe Photoshop. So, let's get started:

Step #1: Open Adobe Photoshop on your system. Once launched, you are now required to open any existing project on which you want to perform these actions.

Step #2: Now, if you want to undo or redo your steps, you have two options, either you can go with the usual “CTRL + Z” keyboard shortcut which will get you exactly one step back, or you can go to edit option and then select the appropriate option from there.

Alternatively, to undo your steps, you can also go to the history section of Photoshop from where you can also see what steps you have gone through till now.

To go to history, you need to click on the Window option from the top navigation menu and locate the history option.

Once found, you need to click on it. This may open a history panel from the right side from where you have a look at your steps.

Now, if you wish you can select the desired steps that you want to undo and then delete them by clicking on the dustbin like icon as shown.

This will produce the same output as the undo command, but the difference is that you can revert as many steps as available.

To say the least, CTRL + Z and CTRL + Y are the undo and redo global actions for any Windows program. So, what if we want to perform the redo and undo operations on a Mac? If you are thinking about the same, then the following section is a must visit for you.

In Mac operating system, the alternative for CTRL + Z is “Command + Z” and for the redo operation the alternative is “Command + Shift + Z.” The Command key in Mac is equivalent to the CTRL command in Windows.

Also take a note that not every action your perform can be redone and undone. So, if these keys don't work in some cases, then you might have performed those actions.

[Additional Information]: Some useful keyboard shortcuts.

  • CTRL + SHIFT+ESC: Opens Windows Task Manager
  • ALT + TAB: Switch to another running program
  • ALT + SPACE: Displays the foreground window's system menu.
  • ALT + F4: Closes the current window
  • SHIFT+DELETE: Delete item permanently without placing it into the recycle bin
  • Windows Logo + L: Lock the computer
  • Windows Logo + R: Open the Run dialog box
  • CTRL + F: Finds for terms in a Window
  • Windows Logo + M: Minimizes all open Windows
  • Shift + Windows Logo + M: Undo the Minimize all (opposite of Windows Logo + M)
  • Windows Logo + D: Display desktop by minimizing all open Windows
  • Windows Logo + TAB: Cycles through running programs (Function similar to Alt + Tab)
  • CTRL + ALT + DEL: Referred to as “Three finger salute” often used to interrupt a function. It provides a bunch of options like task manager, log off and others.

So, this was all about how to undo/redo edits? We hope that this article must have added unique value to your knowledge base.

If this article has helped you in any manner, then do let us know through the comments section. If you have any suggestions or remarks, then those are also cordially welcomed. Also, do not forget to like us on our various social media channels.

Stay tuned for more of such articles.

Keep visiting for more. Thank you for passing by.

Continue Reading

Computers

How to Use a PlayStation 3 Controller in Windows 10?

Published

on

This article is all about How to use a Playstation 3 controller in Windows 10. SO, without wasting any time further, let's get started:

How to Use a PlayStation 3 Controller in Windows 10?

If you are trying to figure out how to use a PS3 controller on a PC? Then you need not look anywhere else; this article has everything that you are looking for.

Step #1: So, in this very first step, you are required to plug in your PlayStation 3 controller device to your system and let the drivers install.

Other than this, you may have to install some other addons or files from Microsoft itself. Many of them might be already installed on your system, but you may need to download or update some like.NET Framework 4.0, Visual C 2013, Xbox 360 PC driver.

Once your system is well equipped with all these, then you now need to download and install software to enable the DualShock 3 on your system.

After you are done with all the prerequisites mentioned, then you are ready to go to the next steps.

Step #2:  You might not need this step to be done but just in case if nothing works out, you can try this too.

To enable the DualShock3 on your system, you may need to install the ScpToolkit. You can follow the following link to proceed forward. Click on the download link and once downloaded, follow the onscreen instructions to install the same.

To install the file which you have just downloaded, you require extracting it and once extracted, run the executable file with administrative privileges. Once the installation is done, you will have access to some subprograms like ScpToolkit Driver Installer, ScpToolkit Updater, and many others.

Now, you need to click on the ScpToolkit Driver Installer and run it with administrative privileges. This will open a new window for you and on the new window; you need to make sure that all the checkboxes are checked.

After this, head towards the section where “Choose DualShock 3” is written. Click on it and from the drop-down menu that follows; you are required to select your DualShock3 controller. Once done then you are now required to click on install. Let the process finish and once it is all done then you will now have your DualShock3 as a plug and play device.

Step #3: Now, we have our basic things with us. If you are lucky enough and your settings are done right then, you might have a working set of PlayStation 3 Controller. If not then you have to go through the tricky part to use the PlayStation three on your Windows system. So, let's see how it goes:

1) Begin by navigating to the start button and then click on it. Alternatively, you can press the Windows key. Both will have the same effect. Once you have done the same then, you are now required go to the settings option.

2) Once you are on the settings button, then you now need to click on the “Update and Security” option. This will open a window for you.

Now, from the left pane of the subsequent window, you need to choose the Recovery option.

3) Now, you will be within the recovery window, so, you now need to go on Advance startup option. This will make your system restart as you will have to click on Restart now, and with the system reboot, you will have your advance startup options with you.

Now, from the options, you are required to select “Troubleshoot.”

4) After choosing troubleshoot, your next step would be to navigate to the Advance Options. Under Advance Options, you will have to go to startup settings.

This will again make your system restart and when your system is done restarting then you will have the list of startup things which are prone to change.

5) Now, you are just a few steps away from finishing the tricky part. All that you require doing is to locate the “Disable Driver Signature Enforcement.” Once you have located the same then, you need to disable it. To do so, you need to press F7.

After doing all the mentioned, you will now have to restart your system, and you can now enjoy using PlayStation three on your Windows 10 system.

If you want to know How to Use a PS3 Controller as a Joystick for Your Windows PC? Then you are required to read it a little further.

To use your PS3 controller as a Joystick, you will have to make use of a third party installer. The chances are that you might have heard about it. The name of the installer is MotionJoy.

You can download it from here.  You are also requested to download the appropriate installer according to your Windows architecture i.e., 32 bit or 64 bit.

Once you have downloaded the mentioned, then you now need to extract the file and launch the executable file. This will open the installation wizard for you.

Follow the onscreen instructions to install the same. Once you are done with it, then run the application and click on the “Load Driver” option which appears on the first screen.

You might get a prompt saying that “Windows can't verify the publisher.” Need not worry about this and select the “Install this software anyway” option.

After this, within few minutes, you will get a prompt saying that install completed.

Now, all that you require doing is to go to the profile section and then to the connected game controllers menu. Now, you need to click on the “Vibration testing” option to check your device functioning.

If your device is vibrating then, you are done with it, If not then try doing this method again. Also, you can calibrate your device.

So, this was all about How to Use a PlayStation 3 Controller in Windows 10? We hope that this might have helped you in your quest of How to Use a PS3 Controller as a Joystick for Your Windows PC?

If you liked this article, then do let us know through the comments section. We would love to hear from you. Also, share this article amongst your peers.

Thank you for crossing by and giving it a read.

Stay tuned and keep visiting for more.

Continue Reading

Computers

How to Manage Optional Features in Windows 10?

Published

on

There are plethora of optional windows features which we can make use of. Like for instance, if you need to record your gameplay video then you need not to install any third party software. All you have to do is to enable the Game DVR feature and use it.

So, if you want to know how to manage optional features in Windows 10 then you are at the right place. This article will make you aware of the prerequisites for the same.

So, let;s start the process:

How to Manage Optional Features in Windows 10?

So, do you ever wanted to know that what are these optional features in Windows 10 are meant for? What are it's basic functionality? So, in order to get the answer for this quest, you need to read the following text.

So, you know that there are n number of optional features which are available in Windows 10. So, basically many of these are meant for business or enterprise networks while some of them can be used by any user.

To make you aware of this fact that each and every feature takes up some space in your system and you have the privilege to turn them on or off. Also, it is not like that you should install every other feature that is available as this might make your system vulnerable to any mishappenings.

The availability of the features entirely depends upon the version of the Windows you are using. Like if you are using Windows 10 Enterprise version then you will have access to much more features as compared to the Windows 10 Home Edition.

So, here we are with some of the common features along with their respective works:

Internet Explorer 11: Despite the fact that with the advent of Windows 10, Microsoft has introduced a brand new browser called “Microsoft Edge” but it has continued the Internet Explorer 11 version along with. So, it is available as the optional feature in Windows 10. You can turn it on or off anytime you want.

Internet Information Services: It is useful for managing a server as it provides tools for the same along with Microsoft IIS web and FTP servers.

Isolated User Mode: This mode allows any application to run in a secluded, dedicated space if ever it is programmed to do the mentioned.

Media Features: These features include Windows media player and you can enable or disable it any time.

Microsft Print to PDF: This is quite a useful tool. You can print a document to PDF by using this feature. Like all other features, you can disable and enable it.

Game DVR: All the game enthusiasts, this fetaure might be of some use for you. This can be a great feature for those who make Gameplay videos. This feature allows you to record your game play. Also, you can make use of this feature not just to record games but also to record anything else on your system. So, this is indeed a great feature.

Hyper- V: Do you run a virtual machine over your Windows System? If yes, then this feature might be of some use for you. Hyper-V helps you in managing, creating and using virtual machines.

Embedded Shell Launcher: Want to replace the Explore.exe shell with a custom shell. FOr doing that, you require the Embedded shell launcher. This might come handy for the tech savvy folks out there.

Along with these there are plethore of other features like .Net Framework 3.5, DIrectPlay, MSMO server and many more.

So, let's see how to manage Windows 10 optional features: 

Step #1: In this very first step, you are required to go to the settings option. For this, you will have to go to start menu and then click on the settings option. This will launch the settings window for you.

If you have done this then you are good to go to the next steps.

Step #2: Once you are at the settings window, then you are now required to click on the “System” option which is usually the very first option. This will take you to another window.

Now, to know what to do next you will have to read further.

Step #3: Now, on the Window which you have got as the result of your recent activity, you need to navigate to the left pane of the window. Now, locate “Apps & Features” and once found, click on it.

Step #4: In the subsequent window, you will have to look for “Manage Optional Features” which is positioned just below the “Apps & Features”.

Now, you can manage optional features. So, if you want to see the features history then you need to click on “See Optional Feature History“. It will show you the optional features history of the last 7 days. So, if you have installed or uninstalled any optional feature in the last 7 days then it will be displayed over there.

To head back to the previous page, you are required to make a click on the back arrow icon positioned at the top of the window.

Also, if you want to add any feature then you need to click on the “Add a feature” option next to which a “+” icon is there. Now, you will have to look for the feature which you want to install. Once found, you now need to click on it and then click on the “Install” button which appears.

Similarly, to uninstall the feature, navigate to the feature, click on it and then click on the “uninstall” button which follows.

So, this is how to add and uninstall optional features in Windows 10? We hope that this article must have helped you in your quest of How to Manage Optional Features in Windows 10?

If you liked this article, then do let us know through the comments section. We would love to hear from you. Also, share this article amongst your peers.

Thank you for crossing by and giving it a read.

Stay tuned and keep visiting for more.

Continue Reading

Computers

How to Check if Windows is Activated or Not?

Published

on

Whenever you update your Windows, the Windows system never displays any successful activated notification or message. So, the confusion tends to creep in that How can I tell if Windows is activated successfully or not.

Activation lets you know that your Windows is genuine. Usually, when the Windows product key is pirated or is not genuine, the activation process will fail. Even if the Windows activation fails, you can still continue to operate the Windows unless you’re using Windows XP.

Generally, Windows are activated just once when you are first installing your operating system. It is really simple to check your Windows system activation status using different methods. Take a look at How to Check if Windows is Activated or Not:

See Also: How To Upgrade Windows 7 Computer To Windows 8 Using Dual-Boot Method?

Checking Via Command Prompt

Checking your activation status via command box is the easiest and fastest way. Take a look at the steps:

  1. Go to Start Menu. Type cmd and press Enter. Alternatively, you can also use the power user menu (Win + X).
  2. Type this command in the command box.
    slmgr/xpr
  3. Just wait for a minute. A dialog box pops up. It will depict the status of your windows activation.
  4. If the command prompt says “the machine is permanently activated”, that means it is activated successfully.
    How-to-Learn-If-Your-Copy-of-Windows

And you are done! With this simple method, just check if your Windows are activated permanently or on a temporary basis.

Checking Via System Window

The System tab is your main tab for PC info and general settings. Take a look at How to Learn If Your Copy of Windows is activated via the System Control Panel applet.

  1. Open start menu and search for “System” in the menu.
  2. The control panel will open up, automatically once you click on System.
    How-to-Learn-If-Your-Copy-of-Windows
  3. In the system window, scroll down to the Window Activation section.
  4. Under the Windows Activation section, you can see that whether your Windows is activated or not.
    How-to-Learn-If-Your-Copy-of-Windows

How to Check if Windows is Activated or Not Via My Computer

  1. Just right- click on the Computer icon and choose properties.
    How-Can-I-Tell-if-My-Computer-is-Running-Genuine-Windows
  2. Scroll down and there will be a section that says Windows activation.
  3. You can see here that whether your Windows is activated or not. It will even tell you the Product ID of your Windows.
    How-Can-I-Tell-if-My-Computer-is-Running-Genuine-Windows

 

How to Check Windows is Genuine

See Also: How to Disable Windows Update in Windows 10?

Take a look at the steps of How Can I Tell if My Computer is Running Genuine Windows:

  1. Click on Start, then type in “activate windows” in the search box.
  2. In case you get a message saying “Activation was successful,” it implies that your copy of Windows 7 is activated and genuine. You will also see the Microsoft Genuine software logo on the right- hand side.
    How-Can-I-Tell-if-My-Computer-is-Running-Genuine-Windows

Checking Online

A lot of validation tools are available online to help you observe and verify the activation of your Windows. Only customers with genuine Windows have access to all optional updates and downloads available from Microsoft.

In simple words, if your copy of Windows is not genuine, then you won't be able to install many updates that are exclusively for customers with genuine Windows.

For example, when your PC downloads any updates, Windows checks to see if your product key or digital entitlement is valid. You will be able to download and only receive the latest updates from Microsoft if Windows on your PC is genuine. In case you are not able to do so, then your PC is running non-genuine Windows.

Take a look at the steps to validate online:

  1. To validate online use below link
    http://www.microsoft.com/genuine/validate
  2. After going to link, download the validation tool (Genuinecheck.exe) that is available on the website.
  3. A validation code will be generated by the tool.
  4. In the validation link, copy and paste the validation code.
  5. As soon as you click Validate, the link will show whether your copy is genuine or not.
  6. If it will be genuine, you will be able to download updates from Microsoft easily.

Things to Remember

Note down a few things that will help you buy genuine Windows.

  1. Just remember the simple rule. Only one copy of Windows can be installed on one PC. This rule applies as per the License terms of Microsoft Software.
  2. It happens that after a repair you experience that validation fails because some repairs require reinstallation of Windows. After repair, just re-enter your original product key for proper Windows activation.
  3. Another reason can be Counterfeit software. Now counterfeit can be difficult to detect. You can always file an online report against anyone who sold you counterfeit software. With counterfeit version, all important functions will get blocked and you will not be able to receive any latest updates.
  4. Remember to always ask the seller to give you Windows disc and the Certificate of Authenticity.

Usually, checking the authenticity of Windows becomes a compulsion if you have downloaded a copy of the Windows from a torrent site or it was installed by a 3rd party. However, if your Windows system is running on trial activation key, the system will expire after the trial period.

See Also: How to Remove Password From Windows 8?

Conclusion

Usually, we tend to ignore this activation aspect until we face some serious issues or the work comes to halt. It is always recommended to check the status of your Windows, and if required upgrade it as soon as possible. Make sure the product key is actually valid and not counterfeit!

A product key is a 25-character code that is located depending upon how you got your copy of Windows. If you bought Windows from an authorized retailer, the product key will be on a label inside the box it came in or if you bought a new PC running Windows, the product key will be preinstalled on your PC.

However, try to buy Windows or a PC with Windows preinstalled directly from Microsoft or from a trustworthy dealer. Make sure to check the Certificate of Authenticity (COA), a proof of license label, and an edge-to-edge hologram, to ensure the genuineness of the Windows.

The above guide on How to Check if Windows is Activated or Not, provides you with several options. Follow them and check the genuineness of the Windows on your PC. To enjoy unlimited access without any complications, always buy or install genuine Windows and not the pirated version!

Continue Reading

Trending